820-IF63.0M-A

Oscilent Corporation IF SAW Filter | 820-IF63.0M-A Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 820-IF63.0M-A . TYPE : 20.2 x 12.6 Thru Hole Base Station & Repeater May 24 2003 63.0 MHz Bandpass Filter 3.80 MHz Bandwidth PART NUMBER : 820-IF63.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo 3dB Bandwidth 40dB Bandwidth Passband Ripple Group Delay Variation Ultimate Attenuation Substrate Material Minimum Typical 63.0 14.0 3.80 5.2 0.40 60 50 LN Maximum 15.0 0.6 100 Units MHz dB MHz MHz dB nsec dB - * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Source/Load Impedance = 50 ohms Part No.: 820-IF63.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if63_0a.htm 12/28/2005