820-IF70.0M-FA

Oscilent Corporation IF SAW Filter | 820-IF70.0M-FA Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 820-IF70.0M-FA . TYPE : 20.2 x 12.6 Thru Hole Base Station & Repeater May 24 2003 70.0 MHz Bandpass Filter 9.45 MHz Bandwidth PART NUMBER : 820-IF70.0M-FA .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth 50dB Bandwidth Passband Ripple Group Delay Variation Absolute Delay Ultimate Rejection Substrate Material Minimum 69.95 9.10 9.40 50 Typical 70.00 20.5 9.15 9.45 10.77 10.90 0.60 70 2.330 55 LN Maximum 70.05 22.0 10.85 11.00 1.0 150 Units MHz dB MHz MHz MHz MHz dB nsec µsec dB - * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE No Matching Required Source/Load Impedance = 50 ohms Part No.: 820-IF70.0M-FA http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if70_0fa.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 820-IF70.0M-FA Page 2 of 2 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if70_0fa.htm 12/28/2005