820-IF70.0M-HR

Oscilent Corporation IF SAW Filter | 820-IF70.0M-HR Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 820-IF70.0M-HR . TYPE : 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003 70.0 MHz Bandpass Filter 19.5 MHz Bandwidth PART NUMBER : 820-IF70.0M-HR . Horizontal : 5.0 MHz/Div Veritical : 10 dB/Div Horizontal : 3.0 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Passband Ripple Group Delay Variation Absolute Delay Ultimate Rejection Substrate Material Ambient Temperature Minimum 69.94 19.00 19.50 50 Typical 70.00 24.0 19.15 19.60 21.45 0.8 30 1.98 55 LN 25 Maximum 70.06 26.0 21.70 1.0 80 Units MHz dB MHz MHz MHz dB nsec µsec dB °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if70_0hr.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 820-IF70.0M-HR Page 2 of 2 L1 = L2 = 150nH 220nH C1 = 0pF C2 = 43pF Source/Load Impedance = 50 ohms Part No.: 820-IF70.0M-HR Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if70_0hr.htm 12/28/2005