820-IF76.9M-A

Oscilent Corporation IF SAW Filter | 820-IF76.9M-A Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 820-IF76.9M-A . TYPE : 20.2 x 12.6 Thru Hole Base Station & Repeater May 24 2003 76.9 MHz Bandpass Filter 3.70 MHz Bandwidth PART NUMBER : 820-IF76.9M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 3dB Bandwidth 40dB Bandwidth Passband Ripple Group Delay Variation Ultimate Rejection Substrate Material Minimum 76.84 3.70 Typical 76.90 27.8 3.85 5.30 0.40 60 50 LN Maximum 76.96 30.0 5.50 1.0 100 Units MHz dB MHz MHz dB nsec dB - * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE No Matching Required Source/Load Impedance = 50 ohms Part No.: 820-IF76.9M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if76_9a.htm 12/28/2005