820-IF87.2M-A

Oscilent Corporation IF SAW Filter | 820-IF87.2M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 820-IF87.2M-A TYPE : 20.18 x12.58mm Base Station & Repeater Apr 18, 2007 87.2 MHz Bandpass Filter PART NUMBER : 820-IF87.2M-A Frequency Response OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth 1.0 dB Bandwidth 3.0 dB Bandwidth 40.0 dB Passband Ripple (Fo +/- 3MHz) Group Delay Variation Absolute Delay Substrate Material Ambient Temperature Ultimate Rejection Minimum 87.14 7.8 50 Typical 87.20 20.5 50 50 7.6 8.0 9.7 0.5 70 2.28 LN 25 55 Maximum 87.26 24.0 9.8 1.0 150 Units MHz dB ohm ohm MHz MHz MHz dB nsec µsec °C dB *Custom parameters available. Contact Oscilent Sales for discussion. PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 820-IF87.2M-A Page 2 of 2 Part No.: 820-IF87.2M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map