835-IF223.936M-A

IF SAW Filter Part Number Package Application Last Modified 835-IF223.936M-A . TYPE : 35.0 x 12.8mm Base Station & Repeater Apr 18, 2007 223.936 MHz Bandpass SAW Filter PART NUMBER : 835-IF223.936M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -40.0 dB Ultimate Rejection Amplitude Ripple Group Delay Variation (smo 0.5%) Absolute Delay at Fo Temperature Coefficient Minimum 50 Typical 223.936 22.5 50 50 1.72 1.89 2.55 55 0.8 200 3.91 -0.03 Maximum 25.0 1.2 Units MHz dB ohm ohm MHz MHz MHz dB dBp-p nsec µsec ppm/°C *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE PIN Description IN-1,OUT-5,GROUND-2,3,4,6,Case FREQUENCY RESPONSE Part No.: 835-IF223.936M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map