835-IF65.0M-G

IF SAW Filter Part Number Package Application Last Modified 835-IF65.0M-G . TYPE : 35.0 x 12.80 Base Station & Repeater Apr 18, 2007 65.0 MHz Bandpass Filter 9.40 MHz Bandwidth PART NUMBER : 835-IF65.0M-G .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -50.0 dB Amplitude Ripple Group Delay Variation Absolute Delay at Fo Ultimate Rejection Temperature Coefficient Minimum 9.20 9.40 50 Typical 65.0 21.5 50 50 9.28 9.50 10.45 0.7 80 3.46 55 -72 Maximum 23.0 10.55 0.9 120 Units MHz dB ohm ohm MHz MHz MHz dBp-p nsec µsec dB ppm/°C *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE Pin Description: IN-1, OUT-5, Ground-2,3,4,6,Case FREQUENCY RESPONSE Part No.: 835-IF65.0M-G Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map