835-IF70.0M-PA

Oscilent Corporation IF SAW Filter | 835-IF70.0M-PA Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF70.0M-PA TYPE : 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007 70.0 MHz Bandpass Filter 20.55 MHz Bandwidth PART NUMBER : 835-IF70.0M-PA FREQUENCY CHARACTERISTICS OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Passband Ripple Group Delay Variation Ultimate Rejection Substrate Material Absolute Delay Ambient Temperature Minimum 69.94 20.35 20.55 55 Typical 70.00 23.5 20.47 20.75 21.81 0.6 70 60 LN 2.83 25 Maximum 70.06 26.0 22.00 1.0 150 Units MHz dB MHz MHz MHz dB nsec dB usec °C * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE TEST FIXTURE L1 = (150+8.2)nH C1 = 33pF Oscilent Corporation IF SAW Filter | 835-IF70.0M-PA Page 2 of 2 L2 = (82+82)nH C2 = 27pF Source/Load Impedance = 50 ohms Part No.: 835-IF70.0M-PA Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map