835-IF75.0M-E

Oscilent Corporation IF SAW Filter | 835-IF75.0M-E Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF75.0M-E . TYPE : 35.0 x 12.8 Thru Hole Base Station & Repeater May 24 2003 75.0 MHz Bandpass Filter 19.20 MHz Bandwidth PART NUMBER : 835-IF75.0M-E .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 18dB Bandwidth 33dB Bandwidth 50dB Bandwidth Passband Ripple Group Delay Variation Ultimate Rejection Substrate Material Ambient Temperature Minimum 69.95 18.90 19.20 50 Typical 75.00 24.0 19.00 19.40 20.20 20.50 20.70 0.65 65 55 LN 25 Maximum 75.05 26.0 20.40 20.70 20.90 1.0 100 Units MHz dB MHz MHz MHz MHz MHz dB nsec dB °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE L1 = 120nH L2 = 180nH C1 = 62pF C2 = 43pF Source/Load Impedance = 50 ohms Part No.: 835-IF75.0M-E http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if75_0e.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 835-IF75.0M-E Page 2 of 2 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if75_0e.htm 12/28/2005