835-IF80.0M-B

Oscilent Corporation IF SAW Filter | 835-IF80.0M-B Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF80.0M-B TYPE : 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007 80.0 MHz Bandpass Filter 25.0 MHz Bandwidth PART NUMBER : 835-IF80.0M-B FREQUENCY CHARACTERISTICS OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 50dB Bandwidth Passband Ripple Group Delay Variation Ultimate Rejection Substrate Material Absolute Delay Ambient Temperature Minimum 79.90 25.0 25.35 50 Typical 80.0 25.0 25.1 25.42 26.72 0.7 40 55 LN 2.44 25 Maximum 80.10 27.0 26.90 1.0 100 Units MHz dB MHz MHz MHz dB nsec dB usec °C * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE TEST FIXTURE L1 = (120+27)nH C1 = 33pF Oscilent Corporation IF SAW Filter | 835-IF80.0M-B Page 2 of 2 L2 = 120nH Source/Load Impedance = 50 ohms C2 = 30pF Part No.: 835-IF80.0M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map