838-IF75.0M-F

Oscilent Corporation IF SAW Filter | 838-IF75.0M-F Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 838-IF75.0M-F . TYPE : 38.0 x 25.0 Thru Hole Base Station & Repeater May 24 2003 75.0 MHz Bandpass Filter 19.0 MHz Bandwidth PART NUMBER : 838-IF75.0M-F .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 18dB Bandwidth 33dB Bandwidth 50dB Bandwidth Passband Ripple Group Delay Variation Ultimate Rejection Absolute Delay Ambient Temperature Minimum 18.70 19.00 50 Typical 75.00 24.50 18.85 19.17 19.95 20.28 20.48 0.65 50 55 2.87 25 Maximum 26.0 20.10 20.40 20.70 1.0 100 Units MHz dB MHz MHz MHz MHz MHz dB nsec dB µsec °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Contact Oscilent for Test Fixture Details http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if75_0f.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 838-IF75.0M-F Page 2 of 2 Part No.: 838-IF75.0M-F Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if75_0f.htm 12/28/2005