861-RF942.5M-H

RF SAW Filter Part Number Package Application Last Modified 861-RF942.5M-H . TYPE : 2.5 x 2.0 SMD EGSM Mar. 2, 2007 EGSM, Balanced RF SAW Filter PART NUMBER : 861-RF942.5M-H .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Attenuation: Condition 925.0~ 960.0 MHz D.C.~ 880.0 MHz 880.0~905.0 MHz 905.0~ 915.0MHz 980.0~ 1050.0 MHz 1050~ 6000.0 MHz Symmetry in Band Output Amplitude Balance (l S31/S21 l) Output Phase Balance (φ(S31)-φ(S21)+180º) Source Impedence (single ended)* Load Impendance (single ended)* Input/Output VSWR Amplitude Ripple Maximum DC Voltage Maximum Input Power Operating Temperature *With Matching Network 925.0~ 960.0 MHz925.0~ 960.0 MHz 925.0~ 960.0 MHz -1.3 -10 -30 0 0 50 150/72 1.8 1.0 Minimum 50 30 10 21 50 Typical 942.5 2.8 52 44 27 27 54 1.2 10 2.5 2.4 0 15 +85 dB degree ohm ohm//nh dBp-p V dBm ºC Maximum 4.0 dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F G In Out Out Ground Ground TEST FIXTURE FREQUENCY RESPONSE VSWR SMITH CHART Part No.: 861-RF942.5M-H Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map