862-RF1690.0M-A

Oscilent Corporation RF SAW Filter | 862-RF1690.0M-A Page 1 of 3 RF SAW Filter Part Number Package Application Last Modified 862-RF1690.0M-A . TYPE : 3.0 x 3.0 SMD Wireless Jan. 01, 2007 Wireless, Balanced RF SAW Filter PART NUMBER : 862-RF1690.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Attenuation: Condition 1679.7~1698.8 MHz 54.0~1100.0 MHz 3262.7~3352.6 MHz 4911.0~5009.0 MHz 6559.4~6665.1 MHz 8211.1~8319.4 MHz Group Delay Ripple Input/ Output VSWR Source Impedence (balanced ended)* Load Impendance (balanced ended)* Maximum DC Voltage Maximum Input Power Operating Temperature * No Matching Network 1679.7~ 1698.8 MHz 1679.7~ 1698.8 MHz Minimum 45 18 25 18 20 -10 Typical 1690.0 3.3 54 22 32 22 28 7.0 2.10 200 200 Maximum 4.5 15.0 2.50 3 0 +70 Units MHz dB dB dB dB dB dB dB ohm ohm V dBm ºC . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F G H In Ground Out Ground Out Ground In Ground TEST FIXTURE Oscilent Corporation RF SAW Filter | 862-RF1690.0M-A Page 2 of 3 Load Impedance = 200 ohms Source Impedance = 200 ohms FREQUENCY RESPONSE VSWR SMITH CHART Oscilent Corporation RF SAW Filter | 862-RF1690.0M-A Page 3 of 3 Part No.: 862-RF1690.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map