862-RF422.25M-A

RF SAW Filter Part Number Package Application Last Modified 862-RF422.25M-A . TYPE : 3.0 x 3.0 SMD CDMA450 Mar. 2 2007 CDMA450, Balanced RF-Rx SAW Filter PART NUMBER : 862-RF422.25M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 420.0~ 425.0 MHz 0.3~ 410.0 MHz 410.0~ 415.0 MHz 445.0~ 600.0MHz 600~ 1200.0 MHz 1200~ 2000.0 MHz Source Impedence (single ended)* Load Impendance (balanced ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 420.0~ 425.0 MHz Minimum 40 35 40 40 35 -30 Typical 422.5 2.6 50 48 48 55 50 50 100 1.9 Maximum 4.8 2.5 27 +80 ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F G H Ground In Ground Ground Out Ground Out Ground TEST FIXTURE Load Impedance = 100 ohms Source Impedance = 50 ohms FREQUENCY RESPONSE VSWR SMITH CHART Part No.: 862-RF422.25M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map