862-RF462.5M-D

RF SAW Filter Part Number Package Application Last Modified 862-RF462.5M-D . TYPE : 3.0 x 3.0 SMD CDMA450(C-Band) Mar. 2 2007 CDMA450, Balanced RF-Rx SAW Filter (C-Band) PART NUMBER : 862-RF462.5M-D .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 460.0~ 464.8 MHz 0.3~ 450.0 MHz 450.0~ 455.0 MHz 485.0~ 505.0MHz 505.0~ 1200.0 MHz 1200~ 2000.0 MHz Source Impedence (single ended)* Load Impendance (balanced ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 460.0~ 464.8 MHz Minimum 40 35 40 40 35 -30 Typical 462.5 2.7 50 47 48 55 50 50 100 1.7 Maximum 4.5 2.4 27 +80 ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F G H Ground In Ground Ground Out Ground Out Ground TEST FIXTURE Load Impedance = 100 ohms Source Impedance = 50 ohms FREQUENCY RESPONSE VSWR SMITH CHART Part No.: 862-RF462.5M-D Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map