862-RF463.5M-B

RF SAW Filter Part Number Package Application Last Modified 862-RF463.5M-B . TYPE : 3.0 x 3.0 SMD CDMA450(H-Band) Mar. 2 2007 CDMA450, Balanced RF-Rx SAW Filter (H-Band) PART NUMBER : 862-RF463.5M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 461.3~ 465.8 MHz 0.3~ 451.3 MHz 451.3~ 455.8MHz 485.0~ 507.5MHz 507.5~ 1200.0 MHz 1200~ 2000.0 MHz Source Impedence (single ended)* Load Impendance (balanced ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 461.3~ 465.8 MHz Minimum 40 35 40 40 35 -30 Typical 463.5 2.2 55 50 50 55 50 50 100 2.1 Maximum 4.5 2.5 27 +80 ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F G H Ground In Ground Ground Out Ground Out Ground TEST FIXTURE Load Impedance = 100 ohms Source Impedance = 50 ohms FREQUENCY RESPONSE VSWR SMITH CHART Part No.: 862-RF463.5M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map