862-RF464.0M-A

Oscilent Corporation RF SAW Filter | 862-RF464.0M-A Page 1 of 3 RF SAW Filter Part Number Package Application Last Modified 862-RF464.0M-A . TYPE : 3.0 x 3.0 SMD CDMA450(B-Band) Jan. 01, 2007 CDMA450(B-Band), Balanced RF-Rx SAW Filter PART NUMBER : 862-RF464.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 461.5~ 466.5 MHz 0.3~ 451.5 MHz 451.5~ 456.5 MHz 485.0~ 507.5MHz 507.5~ 1200.0 MHz 1200.0~ 2000.0 MHz Source Impedence (single ended)* Load Impendance (balanced ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 461.5~ 466.5 MHz Minimum 40 35 40 40 35 -30 Typical 464.0 2.2 55 50 50 55 50 50 100 1.9 Maximum 4.5 2.4 27 +80 ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F G H Ground In Ground Ground Out Ground Out Ground TEST FIXTURE Oscilent Corporation RF SAW Filter | 862-RF464.0M-A Page 2 of 3 Load Impedance = 100 ohms Source Impedance = 50 ohms FREQUENCY RESPONSE VSWR SMITH CHART Oscilent Corporation RF SAW Filter | 862-RF464.0M-A Page 3 of 3 Part No.: 862-RF464.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map