862-RF465.0M-F

RF SAW Filter Part Number Package Application Last Modified 862-RF465.0M-F . TYPE : 3.0 x 3.0 SMD CDMA450 Mar. 2 2007 CDMA450, Balanced RF-Rx SAW Filter PART NUMBER : 862-RF465.0M-F .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 462.5~ 467.5 MHz 0.3~ 452.5 MHz 452.5~ 457.5 MHz 485.0~ 507.5MHz 507.5~ 1200.0 MHz 1200.0~ 1700.0 MHz Source Impedence (single ended)* Load Impendance (balanced ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 462.5~ 467.5 MHz Minimum 40 35 40 30 20 -30 Typical 465.0 2.4 50 48 43 50 35 50 100 1.7 Maximum 4.5 2.1 27 +80 ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F G H Ground In Ground Ground Out Ground Out Ground TEST FIXTURE Load Impedance = 100 ohms Source Impedance = 50 ohms FREQUENCY RESPONSE VSWR SMITH CHART Part No.: 862-RF465.0M-F Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map