863-RF315.0M-A

Oscilent Corporation RF SAW Filter | 863-RF315.0M-A Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 863-RF315.0M-A . TYPE : 3.8 x 3.8 SMD Remote Control Jan. 01, 2007 Remote Control, RF SAW Filter PART NUMBER : 863-RF315.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss (IL MIN) Stop Band Attenuation: Condition 314.82 ~ 315.22 MHz 10.0 ~ 270.0 MHz 270.0~ 309.0 MHz 309.0 ~ 313.94 MHz 316.0 ~ 335.0 MHz 335.0 ~ 400.0 MHz 400.0 ~ 1000.0 MHz Pass Band Relative to IL MIN 3dB Passband Width relative to IL MIN Source Impedence (single ended)* Load Impendance (single ended)* Pass Band Ripple Maximum Input Power Operating Temperature * With Matching Network 314.77 ~315.2 MHz 314.77 ~315.26 MHz 433.76~ 434.16 MHz Minimum 45 30 15 10 35 45 0.8 -40 Typical 315.0 2.2 50 35 20 15 40 50 1.5 2.0 0.92 50 50 1.0 Maximum 4.0 3.0 6.0 2.0 10 +125 dB MHz ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT 1 2 3 4 5 6 7 8 Out Ground Ground Ground In Ground Ground Ground TEST FIXTURE Oscilent Corporation RF SAW Filter | 863-RF315.0M-A Page 2 of 2 Source/ Load Impedance = 50 ohms FREQUENCY RESPONSE Part No.: 863-RF315.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map