864-RF881.5M-H

RF SAW Filter Part Number Package Application Last Modified 864-RF881.5M-H . TYPE : 1.4 x 2.0 SMD CDMA Mar. 10, 2007 CDMA, Balanced RF-Rx SAW Filter PART NUMBER : 864-RF881.5M-H .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss Attenuation: Condition 869.0~ 894.0 MHz D.C.~ 824.0 MHz 824.0~849.0 MHz 915.0~ 960.0MHz 960.0~ 6000.0 MHz Output Amplitude Balance (l S31/S21 l) Output Phase Balance (φ(S31)-φ(S21)+180º) Source Impedence (single ended)* Load Impendance (balanced ended)* VSWR within Amplitude Ripple Maximum DC Voltage Maximum Input Power Operating Temperature *Matching Network 869.0~ 894.0 MHz 869.0~ 894.0 MHz Minimum 50 45 23 14 -1.0 -5.0 -30 Typical 881.5 2.3 64 60 29 18 0 0 50 100/56 1.8 0.8 Maximum 2.9 1.0 5.0 2.3 1.5 5 15 +80 dB degree ohm ohm//nH dBp-p V dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E In Ground Balance Out Balance Out Ground TEST FIXTURE FREQUENCY RESPONSE VSWR SMITH CHART Part No.: 864-RF881.5M-H Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map