873-IF190.0M-E

IF SAW Filter Part Number Package Application Last Modified 873-IF190.0M-E . TYPE : 3.8 x 3.8mm SMD Base Station & Repeater Apr 18, 2007 190.0 MHz Bandpass Filter WCDMA Application PART NUMBER : 873-IF190.0M-E .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance* Load Impedance)* Operating Temperature Range Storage Temperature Range Relative Attenuation: from +-5.0MHz to +/-7.5MHz from +/-7.5MHz to +/-12.5MHz from +/-12.5MHz to +/-15MHz from +/-15Mhz to +/-100MHz Amplitude Ripple within Fo +/-2.0MHz Ultimate Rejection Group Delay Ripple (Fo +/-2.0MHz) Input Power Level Minimum 0 -20 10.0 25 35 40 50 Typical 190.0 5.0 50/1000 50/1000 19.0 33 37 43 0.9 55 70 +10 Maximum 7.0 +70 +85 2.0 100 Units MHz dB ohm ohm °C °C dB dB dB dB dBp-p dB nsec dBm *Single Ended/Balanced with Matching Network (Reference Testing Environment Circuit as shown) Modify Impedance Values as necessary. . PACKAGE(mm) TEST FIXTURE FREQUENCY RESPONSE Part No.: 873-IF190.0M-E Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map