Hyper SIDELED® Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LS A67K, LO A67K, LY A67K
Besondere Merkmale • Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss • Besonderheit des Bauteils: Abstrahlung parallel zur Platine, deshalb ideal zur Einkopplung in Lichtleiter • Wellenlänge: 630 nm (super-rot), 606 nm (orange), 587 nm (gelb) • Abstrahlwinkel: Lambertscher Strahler (120°) • Technologie: InGaAlP • optischer Wirkungsgrad: 6 lm/W (gelb) 5 lm/W (super-rot), 9 lm/W (orange) • Gruppierungsparameter: Lichtstärke, Wellenlänge • Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet • Lötmethode: IR Reflow Löten und Wellenlöten (TTW) • Vorbehandlung: nach JEDEC Level 2 • Gurtung: 12-mm Gurt mit 2000/Rolle, ø330 mm • ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-B Anwendungen • optischer Indikator • Einkopplung in Lichtleiter • Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung) • Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung) • Markierungsbeleuchtung • Signal- und Symbolleuchten
Features • package: white SMT package, colorless clear resin • feature of the device: radiation direction parallel to PCB, so an ideal LED for coupling in light guides • wavelength: 630 nm (super-red), 606 nm (orange), 587 nm (yellow) • viewing angle: Lambertian Emitter (120°) • technology: InGaAlP • optical efficiency: 6 lm/W (yellow) 5 lm/W (super-red), 9 lm/W (orange) • grouping parameter: luminous intensity, wavelength • assembly methods: suitable for all SMT assembly methods • soldering methods: IR reflow soldering and TTW soldering • preconditioning: acc. to JEDEC Level 2 • taping: 12 mm tape with 2000/reel, ø330 mm • ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B
Applications • optical indicators • coupling into light guides • backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising) • interior automotive lighting (e.g. dashboard backlighting) • marker lights • signal and symbol luminaire
2006-10-31
1
LS A67K, LO A67K, LY A67K
Bestellinformation Ordering Information Typ Type Emissionsfarbe Color of Emission Lichtstärke1) Seite 15 Luminous Intensity1) page 15 IF = 2 mA IV (mcd) 4.5 … 11.2 7.1 … 18.0 4.5 … 18.0 7.1 … 18.0 11.2 … 28.0 7.1 … 28.0 5.6 … 14.0 9.0 … 22.4 5.6 … 22.4 Lichtstrom2) Seite 15 Luminous Flux2) page 15 IF = 2 mA ΦV (mlm) 22 (typ.) 35 (typ.) 30 (typ.) 40 (typ.) 60 (typ.) 50 (typ.) 30 (typ.) 45 (typ.) 40 (typ.) Bestellnummer Ordering Code
LS A67K-J1K2-1 LS A67K-K1L2-1 LS A67K-J1L2-1 LO A67K-K1L2-24 LO A67K-L1M2-24 LO A67K-K1M2-24 LY A67K-J2L1-26 LY A67K-K2M1-26 LY A67K-J2M1-26
Anm.:
super-red
Q65110A2016 Q65110A2017 Q65110A2018 Q65110A4968 Q65110A4970 Q65110A4969 Q65110A2065 Q65110A2066 Q65110A2067
orange
yellow
Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LO A67K-K1L2-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen K1, K2, L1 oder L2 enthalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlängengruppe geliefert. Z.B.: LO A67K-K1L2-24 bedeutet, dass auf dem Gurt nur eine der Wellenlängengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 für nähere Information). LS A67K-J1K2-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
Note:
The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LO A67K-K1L2-24 means that only one group K1, K2, L1 or L2 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LO A67K-K1L2-24 means that only 1 wavelength group -2, -3, or -4 will be shippable (see page 5 for explanation). LS A67K-J1K2-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable.
Vergleichstabelle für 10 mA Correlation Table for 10 mA Typ Type IF = 2 mA LS A67K-J1K2-1 LS A67K-K1L2-1 LS A67K-J1L2-1 LO A67K-K1L2-24 LO A67K-L1M2-24 LO A67K-K1M2-24 LY A67K-J2L1-26 LY A67K-K2M1-26 LY A67K-J2M1-26 super-red Emissionsfarbe Color of Emission Lichtstärke1) Seite 15 Luminous Intensity1) page 15 IF = 2 mA IV (mcd) 4.5 … 11.2 7.1 … 18.0 4.5 … 18.0 7.1 … 18.0 11.2 … 28.0 7.1 … 28.0 5.6 … 14.0 9.0 … 22.4 5.6 … 22.4 Lichtstärke2) Seite 15 Lichtstrom2) Seite 15 Luminous Intensity2) page 15 IF = 10 mA IV (mcd) Luminous Flux2) page 15 IF = 10 mA ΦV (mlm) 120 (typ.) 195 (typ.) 180 (typ.) 195 (typ.) 300 (typ.) 270 (typ.) 150 (typ.) 240 (typ.) 210 (typ.)
⇒ ⇒ ⇒
40 (typ.) 65 (typ.) 60 (typ.) 65 (typ.) 100 (typ.) 90 (typ.) 50 (typ.) 80 (typ.) 70 (typ.)
orange
yellow
Siehe auch Grafik Seite 7 / see also graph on page 7
2006-10-31
2
LS A67K, LO A67K, LY A67K
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current (TA=25°C) Stoßstrom Surge current t ≤ 10 µs, D = 0.005, TA=25°C Sperrspannung3) Seite 15 Reverse voltage3) page 15 (TA=25°C) Leistungsaufnahme Power consumption (TA=25°C) Wärmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 15 Junction/ambient4) page 15 Sperrschicht/Lötpad Junction/solder point Symbol Symbol LS, LO Werte Values LY °C °C °C mA – 40 … + 100 – 40 … + 100 + 125 20 Einheit Unit
Top Tstg Tj IF
IFM
100
mA
VR
12
V
Ptot
45
mW
Rth JA Rth JS
480 250
K/W K/W
2006-10-31
3
LS A67K, LO A67K, LY A67K
Kennwerte Characteristics (TA = 25 °C) Bezeichnung Parameter Wellenlänge des emittierten Lichtes Wavelength at peak emission IF = 2 mA Dominantwellenlänge5) Seite 15 Dominant wavelength5) page 15 IF = 2 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 2 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung6) Seite 15 Forward voltage6) page 15 IF = 2 mA Sperrstrom Reverse current V R = 12 V Temperaturkoeffizient von λpeak Temperature coefficient of λpeak IF = 2 mA; –10°C ≤ T ≤ 100°C Temperaturkoeffizient von λdom Temperature coefficient of λdom IF = 2 mA; –10°C ≤ T ≤ 100°C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 2 mA; –10°C ≤ T ≤ 100°C Optischer Wirkungsgrad Optical efficiency IF = 2 mA
* Einzelgruppen siehe Seite 5 Individual groups on page 5
Symbol Symbol LS (typ.)
Werte Values LO 610 LY 591 643
Einheit Unit nm
λpeak λdom ∆λ
630 ±6 16
606*
–6/+3
587*
–7/+8
nm
(typ.)
16
15
nm
(typ.) (min.) (typ.) (max.) (typ.) (max.) (typ.)
2ϕ
120 1.7 1.8 2.2 0.01 10 0.14
120 1.7 1.8 2.2 0.01 10 0.14
120 1.7 1.8 2.2 0.01 10 0.12
Grad deg. V V V
VF VF VF IR IR TCλpeak
µA µA
nm/K
(typ.)
TCλdom
0.05
0.09
0.09
nm/K
(typ.)
TCV ηopt
– 1.8
– 1.5
– 2.1
mV/K
(typ.)
5
9
6
lm/W
2006-10-31
4
LS A67K, LO A67K, LY A67K
Wellenlängengruppen (Dominantwellenlänge)5) Seite 15 Wavelength Groups (Dominant Wavelength)5) page 15 Gruppe Group 2 3 4 5 6 yellow min. 580 583 586 589 592 max. 583 586 589 592 595 min. 600 603 606 orange max. 603 606 609 Einheit Unit nm nm nm nm nm
Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group J1 J2 K1 K2 L1 L2 M1 M2 Lichtstärke1) Seite 15 Luminous Intensity1) page 15 IV (mcd) 4.50 … 5.60 5.60 … 7.10 7.10 … 9.00 9.00 …11.20 11.20 …14.00 14.00 …18.00 18.00 …22.40 22.40 …28.00 Lichtstrom2) Seite 15 Luminous Flux2) page 15 ΦV (mlm) 15 (typ.) 19 (typ.) 24 (typ.) 30 (typ.) 40 (typ.) 50 (typ.) 60 (typ.) 75 (typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 4 bzw. 6 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes either a lower familiy group, an upper family group or a grouping of all individual groups of 4 or 6 brightness groups. Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: K2-3 Example: K2-3 Helligkeitsgruppe Brightness Group K2
Note:
Wellenlänge Wavelength 3
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten. No packing unit / tape ever contains more than one group for each selection.
2006-10-31
5
LS A67K, LO A67K, LY A67K
Relative spektrale Emission2) Seite 15 Relative Spectral Emission2) page 15 V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (λ); TA = 25 °C; IF = 2 mA
100 Ι rel % orange 80 super-red
OHL00555
Vλ
60
yellow
40
20
0 400
450
500
550
600
650
nm λ
700
Abstrahlcharakteristik2) Seite 15 Radiation Characteristic2) page 15 Irel = f (ϕ); TA = 25 °C
40˚ 30˚ 20˚ 10˚ 0˚
OHL01660
ϕ
1.0
50˚
0.8
0.6 60˚ 0.4 70˚ 0.2 80˚ 90˚ 100˚ 1.0
2006-10-31
0
0.8
0.6
0.4
0˚
6
20˚
40˚
60˚
80˚
100˚
120˚
LS A67K, LO A67K, LY A67K
Durchlassstrom2) Seite 15 Forward Current2) page 15 IF = f (VF); TA = 25 °C Relative Lichtstärke2) 7) Seite 15 Relative Luminous Intensity2) 7) page 15 IV/IV(2 mA) = f (IF); TA = 25 °C
OHL00388
IF
10 2 mA 10 1
10 2
OHL00376
IV I V (2 mA)
super-red orange yellow 10 1
10 0
5
10 -1
10 0
10 -2
5
10 -3 1.4
1.6
1.8
2.0
2.2
V 2.6
10 -1 10 0
5
10 1
mA
10 2
VF
Relative Lichtstärke Relative Luminous Intensity2) page 15 IV/IV(25 °C) = f (Tj); IF = 2 mA
2.5
2) Seite 15
IF
OHL00290
ΙV Ι V (25 ˚C)
1.5
1.0
0.5
0.0
-60 -40 -20
0
20 40 60
˚C 100
Tj
2006-10-31 7
LS A67K, LO A67K, LY A67K
Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I F = f (T )
IF
25 mA 20
OHL01429
TA
TS
15
10
5
TA temp. ambient TS temp. solder point
0 0 20 40 60 80 ˚C 100
T
Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 °C
0.12 IF A 0.10
OHL02442
Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 °C
0.12 IF A 0.10
OHL02442
D= T
tP
tP
IF T
D= T
tP
tP
IF T
0.08
D=
0.005 0.01 0.02 0.05 0.1 0.2 0.5 1
0.08
D=
0.005 0.01 0.02 0.05 0.1 0.2 0.5 1
0.06
0.06
0.04
0.04
0.02
0.02
0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102
0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102
tp
2006-10-31 8
tp
LS A67K, LO A67K, LY A67K
Maßzeichnung8) Seite 15 Package Outlines8) page 15
(2.4 (0.094))
2.8 (0.110)
2.4 (0.094)
4.2 (0.165) 3.8 (0.150)
0.7 (0.028)
1.1 (0.043) Cathode 2.54 (0.100) spacing (1.4 (0.055)) 0.9 (0.035) Anode
(2.85 (0.112))
Cathode marking
(0.3 (0.012))
(2.9 (0.114))
3.8 (0.150) 3.4 (0.134)
(R1)
C
A
4.2 (0.165) 3.8 (0.150)
Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschrägte Ecke bevelled edge 40 mg
GPLY6880
Gurtung / Polarität und Lage8) Seite 15 Method of Taping / Polarity and Orientation
4 (0.157) 1.5 (0.059) 2 (0.079)
8) page 15
Verpackungseinheit 2000/Rolle, ø330 mm Packing unit 2000/reel, ø330 mm
Cathode/Collector Marking
1.75 (0.069)
4.25 (0.167)
8 (0.315)
3.95 (0.156)
5.5 (0.217)
OHAY2273
2006-10-31
9
12 (0.472)
LS A67K, LO A67K, LY A67K
Empfohlenes Lötpaddesign8) Seite 15 Recommended Solder Pad8) page 15
4.2 (0.165)
Wellenlöten (TTW) TTW Soldering
4.5 (0.177)
1.7 (0.067) Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation Pick up Area Lötstopplack Solder resist Cu Fläche > 16 mm 2 per pad Cu-area
OHPY1302
Empfohlenes Lötpaddesign8) Seite 15 Recommended Solder Pad8) page 15
IR Reflow Löten IR Reflow Soldering
3.7 (0.146)
3.0 (0.118)
1.2 (0.047) Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation
Cu-Fläche > 16 mm 2 Cu-area > 16 mm 2 Lötstopplack Solder resist
OHLPY965
2006-10-31
10
LS A67K, LO A67K, LY A67K
Lötbedingungen Soldering Conditions IR-Reflow Lötprofil für bleifreies Löten IR Reflow Soldering Profile for lead free soldering
300 ˚C 255 ˚C 240 ˚C 217 ˚C 200 30 s max 150 120 s max 100 Ramp Up 3 K/s (max) 25 ˚C 0 0 50 100 150 200 250 s 300 100 s max Ramp Down 6 K/s (max) 10 s min
Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 (nach J-STD-020B) (acc. to J-STD-020B)
OHLA0687
T
250
Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile
˚C 260 ˚C +0˚C -5 245 ˚C ±5 ˚C ˚C 235 ˚C +5˚C -0
50
t
Wellenlöten (TTW) TTW Soldering
300 C
(nach CECC 00802) (acc. to CECC 00802)
OHLY0598
10 s 235 C ... 260 C 2. Welle 2. wave
Normalkurve standard curve Grenzkurven limit curves
T
250
200 1. Welle 1. wave 150 100 C ... 130 C 100 2 K/s 50 Zwangskühlung forced cooling ca 200 K/s 5 K/s 2 K/s
0 0 50 100 150 200 s 250
t
2006-10-31
11
LS A67K, LO A67K, LY A67K
Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL)
OSRAM Opto
Semiconductors
(6P) BATCH NO: Batch Number
Bar Code
(1T) LOT NO: Lot Number
Sa m
Bar Code
W1
(9D) D/C: Date Code
pl e
13.0 ±0.25
Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3:
RoHS Compliant ML Temp ST 2 260 C RT
Additional TEXT R077 DEMY PACKVAR: Packing Type
Bar Code
(X) PROD NO: Product Code
(Q)QTY: Product Quantity per Reel
(G) GROUP: X - X - X Forward Voltage Group Wavelength Group Brightness Group
OHA12043
Gurtverpackung Tape and Reel
D0 P2
P0
F W
E A N
P1
Direction of unreeling
Label
W2
Direction of unreeling
Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm
OHAY0324
Tape dimensions in mm (inch) W P0 P1 P2 D0 E F
12 + 0.3 – 0.1
4 ± 0.1 8 ± 0.1 2 ± 0.05 1.5 + 0.1 1.75 ± 0.1 5.5 ± 0.05 (0.157 ± 0.004) (0.315 ± 0.004) (0.079 ± 0.002) (0.059 + 0.004) (0.069 ± 0.004) (0.217 ± 0.002)
Reel dimensions in mm (inch) A 330 (13) W 12 (0.472) Nmin 60 (2.362) W1 12.4 + 2 (0.488 + 0.079) W2 max 18.4 (0.724)
2006-10-31
12
LS A67K, LO A67K, LY A67K
Trockenverpackung und Materialien Dry Packing Process and Materials
Moisture-sensitive label or print
L VE LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag ˚C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co ˚C 72 nd Ho urs 5 ba E CO te 48 ˚C su ss e Ho co ± is UR ce 24 6 da e y MI 40 be tim h ˚C e ThIST l pro tor < tim SE or ). 23 tim e at t wilnt or l wit fac ˚C MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l45 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a pro ve 6 Le de , : e te co , g ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in r-p RH g, bla in Flo Mo ba TD po If bla % ith kin Ca (if life s ar t. s w 10 ba tor J-S thi va p. elf Ye ar ek , _ < e ica me , C 1 urs Ye er tem ted t Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 48 ref dy red reqy is 2. bo e Mo /JE tim dit 16 req e 2b a) Sto es tim d: or mi or g is IPC tim e vic b) or ne Flo e Hu tim or De 2a kin nc pe te Flo a) o or 3. b) baere Flo da e 1 Flo If al ref tim vel l 2 4. se d l 2a ve 3 Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo
el
Barcode label
N TIO U A C
d
O
S
R
A
M
Humidity indicator Barcode label Desiccant
Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat.
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Kartonverpackung und Materialien Transportation Packing and Materials
L VE LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag ˚C ati rar ck rel 30 _ < inf pa % of to ak 90 urs d ). < ns (pe or d Ho urs de , cte itio Ho urs an bje ing co ˚C 72 nd Ho urs 5 te 48 ˚C su ss e Ho co ± ce 24 6 da y 40 be tim e e ˚C h l pro < tor tim or e ). wit 23 tim at t wilnt l or fac ˚C Flo s tim at or ca ale at re. Flo d or el nth tha nti Flo uiv du 4 if: rea es l Flo lab mo ide 5 ce eq low g, ve l vic 5a is be or de 24 tin en pro 6 Le ve l de , : e te co , g un wh Le ve l ke r se da ure ba ed low Le ve mo % ba e ba al d Le ist ure en ref e e 10 tim se for ist ure ale op se for > , Mo se 3 ist ure is or . , se is ha Mo nk be ist nk rd g -03 Mo in r-p RH g, bla in Flo Mo ba Ca TD po If bla % kin t. ith life s (if ar s p. w 10 ba tor J-S thi va elf Ye ar ek , _ < e ica me , C 1 urs Ye t tem ted Sh ter at ed low uir > 1 WeHo un Af Indno uir DE dy 1. d e 48 ref reqy is JE 2. bo Mo ore tim e e 16 req C/ es dit 2b a) St tim d: or mi is e or g e IP tim vic b) ne or Hu Flo tim or De 2a kin nc pe te Flo a) o or 3. b) baere Flo da e 1 Flo If al ref tim vel l 2 2a 4. se d 3 Le ve l g an Le ve l Ba te ure Le ve Le ist ure Da ist ure Mo ist ure Mo ist Mo Mo
el
N VE RS ins IONSITI TO T nta UC SE U g co ND A baRECO is CThISTU MI SE
MO TO OP
Muster
ED Bin Bin 1: Bin 2: P3: Q- 1-2 ML 1-2 0 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0C R0 dit ion C R RT PA 77 al CK TE VA XT R:
M ul LS ti Y TO T6 PL 76
R1 8
DE MY
O S m RA ic M on
3G H1 23
BA TC H
Barcode label
Muster
ED Bin Bin 1: Bin 2: P-1 3: Q- -20 ML 1-2 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0C R0 dit ion C R RT PA 77 al CK TE VA XT R:
(X )
PR OD
M ul LS ti Y TO T6 PL 76
R1 8
DE MY
NO :
25 014 110
(1T )
LO T
NO : 12
(6P )
Se S m RA ic M on du O ct pto or NO s
3G H1 23 4
BA TC H
(X)
PR OD
NO :
25 014 110
(1T )
LO T
NO : 12
(6P )
(Q )Q TY : 20
998 021 210
(9D )
D/C : 01
44
O
:
00
(G )
GR OU P:
P1+ Q -1
(Q )Q TY : 20
Se
NO :
8 2199 2100
O pt or o
s
ct
du
(9D )
D/ C:
01 44
4
00
(G )
GR OU P:
P1+
Q -1
Packing Sealing label
OHA02044
2006-10-31
13
O SR AM
WET 15% 10% 5%
Humidity Indicator MIL-I-8835
Comparator check dot If wet, examine units, if necessary bake units If wet, examine units, if necessary bake units If wet, parts still adequately dry. change desiccant
OSR
AM
OHA00539
Barcode label
LS A67K, LO A67K, LY A67K
Revision History: 2006-10-31 Previous Version: 2005-11-03 Page 8 8 5 all 2 Subjects (major changes since last revision) new diagram max. perm. forward current (OHL00429=>OHL01429) value: min. forward voltage new color orange implemented ordering code (orange) Date of change 2004-08-11 2004-12-02 2005-11-03 2006-10-31
new pulse diagrams (OHL00827=>OHL02442, OHL00828=>OHL02442) 2004-08-11
Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 15 may only be used in life-support devices or systems10) page 15 with the express written approval of OSRAM OS. 2006-10-31 14
LS A67K, LO A67K, LY A67K
Fußnoten:
1)
2)
3) 4) 5) 6)
7)
8) 9) 10)
Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm2 je Pad) Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt. Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt. Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden Maße werden wie folgt angegeben: mm (inch) Gehäuse hält TTW-Löthitze aus nach CECC 00802 Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist.
Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of ± 11%.
2)
3) 4) 5) 6)
Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size ≥ 16 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.
7)
8) 9) 10)
11)
11)
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.
Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. 2006-10-31 15