LYR976

Hyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976 Besondere Merkmale • Gehäusetyp: 0805 • Besonderheit des Bauteils: extrem kleine Bauform 2,0 mm x 1,25 mm x 0,8 mm • Wellenlänge: 632 nm (super-rot), 605 nm (orange), 587 nm (gelb) • Abstrahlwinkel: extrem breite Abstrahlcharakteristik (160°) • Technologie: InGaAlP • optischer Wirkungsgrad: 7 lm/W (super-rot), 11 lm/W (orange, gelb) • Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet • Lötmethode: IR Reflow Löten • Vorbehandlung: nach JEDEC Level 2 • Gurtung: 8 mm Gurt mit 4000/Rolle, ø180 mm Anwendungen • Informationsanzeigen im Außenbereich • Einkopplung in Lichtleiter • Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) • Signal- und Symbolleuchten • Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.ä.) • Spielsachen Features • package: 0805 • feature of the device: extremely small package 2.0 mm x 1.25 mm x 0.8 mm • wavelength: 632 nm (super-red), 605 nm (orange), 587 nm (yellow) • viewing angle: extremely wide (160°) • technology: InGaAlP • optical efficiency: 7 lm/W (super-red), 11 lm/W (orange, yellow) • assembly methods: suitable for all SMT assembly methods • soldering methods: IR reflow soldering • preconditioning: acc. to JEDEC Level 2 • taping: 8 mm tape with 4000/reel, ø180 mm Applications • outdoor displays • coupling into light guides • backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting) • signal and symbol luminaire • marker lights (e.g. steps, exit ways, etc.) • toys 2001-02-12 1 LS R976, LO R976, LY R976 Typ Emissionsfarbe Farbe der Lichtaustrittsfläche Color of the Light Emitting Area Lichtstärke Bestellnummer Type Color of Emission Luminous Intensity IF = 20 mA IV (mcd) min. typ. 50 70 60 18 28 28 Ordering Code LS R976 LO R976 LY R976 super-red orange yellow colorless diffused colorless diffused colorless diffused Q62702-P5178 Q62702-P5176 Q62702-P5177 Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ± 11%. Anm.: gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: Total color tolerance range, delivery in single groups (please see page 5) The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. 2001-02-12 2 LS R976, LO R976, LY R976 Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stoßstrom Surge current tp = 10 µs, D = 0.1 Sperrspannung Reverse voltage Leistungsaufnahme Power consumption Symbol Symbol Wert Value – 30 … + 8 5 – 40 … + 8 5 + 95 25 0.1 Einheit Unit °C °C °C mA A Top Tstg Tj IF IFM VR Ptot 5 65 V mW Wärmewiderstand Thermal resistance Sperrschicht/Umgebung Rth JA Junction/ambient Rth JS Sperrschicht/Lötpad Junction/solder point Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2) mounted on PC board FR 4 (pad size ≥ 16 mm 2) 800 450 K/W K/W 2001-02-12 3 LS R976, LO R976, LY R976 Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Wellenlänge des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlänge 1) Dominant wavelength IF = 20 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 2) Forward voltage IF = 20 mA Sperrstrom Reverse current VR = 5 V Temperaturkoeffizient von λpeak Temperature coefficient of λpeak IF = 20 mA; –10°C ≤ T ≤ 100°C Temperaturkoeffizient von λdom Temperature coefficient of λdom IF = 20 mA; –10°C ≤ T ≤ 100°C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; –10°C ≤ T ≤ 100°C Optischer Wirkungsgrad Optical efficiency IF = 20 mA 1) Symbol Symbol LS (typ.) Werte Values LO 610 LY 591 645 Einheit Unit nm λpeak λdom ∆λ (typ.) 633 ±6 16 606 ±6 16 588 ±8 15 nm (typ.) nm (typ.) (typ.) (max.) (typ.) (max.) (typ.) 2ϕ 160 2.0 2.4 0.01 100 0.14 160 2.0 2.4 0.01 100 0.13 160 2.0 2.4 0.01 100 0.13 Grad deg. V V VF VF IR IR TCλpeak µA µA nm/K (typ.) TCλdom 0.01 0.07 0.10 nm/K (typ.) TCV – 2.0 – 1.7 – 2.5 mV/K (typ.) ηopt 7 11 11 lm/W Wellenlängengruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt. Wavelength groups are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm. Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0.1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V. 2) 2001-02-12 4 LS R976, LO R976, LY R976 1) Wellenlängengruppen für LY R976 Wavelength groups for LY R976 Gruppe Group min. 3 4 5 6 580 584 588 592 Wellenlänge Wavelength max. 584 588 592 596 Einheit Unit nm nm nm nm 2001-02-12 5 LS R976, LO R976, LY R976 Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 20 mA Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit Standard eye response curve 100 Ι rel % orange 80 Vλ 60 yellow super-red OHL00555 40 20 0 400 450 500 550 600 650 nm λ 700 Abstrahlcharakteristik Irel = f (ϕ) Radiation Characteristic 40˚ 30˚ 20˚ 10˚ 0˚ OHL00408 ϕ 1.0 50˚ 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 90˚ 100˚ 1.0 2001-02-12 0 0.8 0.6 0.4 0˚ 6 20˚ 40˚ 60˚ 80˚ 100˚ 120˚ LS R976, LO R976, LY R976 Durchlassstrom IF = f (VF) Forward Current TA = 25 °C 10 2 mA 5 OHL00232 Relative Lichtstärke IV/IV(20 mA) = f (IF) Relative Luminous Intensity TA = 25 °C 10 1 ΙV Ι V (20 mA) 10 0 OHL00642 IF 10 1 5 5 10 -1 5 10 0 5 10 -2 5 super-red, orange yellow 10 -1 10 -3 1 1.4 1.8 2.2 2.6 3 V 3.4 10 -2 10 -1 10 0 10 1 mA 10 2 ΙF VF Maximal zulässiger Durchlassstrom IF = f (T) Max. Permissible Forward Current 30 mA I F 25 OHL00420 Relative Lichtstärke IV/IV(25 °C) = f (TA) Relative Luminous Intensity IF = 20 mA 2 OHL00641 IV IV (25 ˚C) 1.6 orange yellow super-red 1.2 20 15 0.8 10 5 0.4 orange yellow super-red 0 0 10 20 30 40 50 60 70 80 °C 100 TA 0 -20 0 20 40 60 ˚C 100 TA 7 2001-02-12 LS R976, LO R976, LY R976 Maßzeichnung Package Outlines ø0.6 (ø0.024) ø0.4 (ø0.016) Cathode mark 1.35 (0.053) 1.15 (0.045) 0.4 (0.016) 0.2 (0.008) 0.9 (0.035) 0.7 (0.028) 1.25 (0.049) 1.05 (0.041) 2.1 (0.083) 1.9 (0.075) 1.4 (0.055) 1.2 (0.047) 0.5 (0.020) 0.3 (0.012) Cathode mark Soldering terminal may flow in x, y direction GEOY6024 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gewicht / Approx. weight: 3.2 mg 2001-02-12 8 1.1 (0.043) 0.9 (0.035) LS R976, LO R976, LY R976 Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) 250 ˚C OHLA0685 Tmax = 245 ˚C T 200 T = 183 ˚C t = 70 s 150 2-3 K/s 100 2-3 K/s 50 0 0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 5:00 min 5:30 t Empfohlenes Lötpaddesign Recommended Solder Pad IR Reflow Löten IR Reflow Soldering 1.2 (0.047) 0.9 (0.035) 1.2 (0.047) OHAPY607 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2001-02-12 9 1.2 (0.047) LS R976, LO R976, LY R976 Gurtung / Polarität und Lage Verpackungseinheit 4000/Rolle, ø180 mm Method of Taping / Polarity and Orientation Packing unit 4000/reel, ø180 mm Processive direction 1.5 (0.059) 4 (0.157) C 2 (0.079) 1.75 (0.069) 8 (0.315) A 1.6 (0.063) Cathode mark 4 (0.157) (2.4 (0.094)) 3.5 (0.138) OHAY0530 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2001-02-12 10 LS R976, LO R976, LY R976 Revision History: 2001-02-12 Previous Version: Page 2001-02-12 Subjects (major changes since last revision) Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2001-02-12 11