Q62703-Q2229

ARGUS® LED 3 mm (T1) LED, Non Diffused LS K380, LO K380, LY K380, LG K380, LP K380 Besondere Merkmale • Gehäusetyp: eingefärbtes, klares 3 mm (T1) Gehäuse mit spezieller Linse • Besonderheit des Bauteils: mit Einsatz eines äußeren Reflektors zur Hinterleuchtung von Leuchtfeldern und LCD-Anzeigen; Lötspieße mit Aufsetzebene • Wellenlänge: 628 nm (super-rot), 606 nm (orange), 587 nm (gelb), 570 nm (grün), 560 nm (pure green) • Abstrahlwinkel: angepasst an Einsatz mit äußerem Reflektor, siehe Diagramm • Technologie: GaAlP (super-rot, orange, gelb, grün), GaP (pure green) • optischer Wirkungsgrad: 1,5 lm/W (super-rot, orange, gelb), 2,5 lm/W (grün), 0,6 lm/W (pure green) • Gruppierungsparameter: Lichtstrom • Lötmethode: Wellenlöten (TTW) • Verpackung: Schüttgut, gegurtet lieferbar Anwendungen • Einsatz mit äußerem Reflektor • optischer Indikator • Hinterleuchtung (LCD, Schalter, Tasten, Displays) • Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u.ä.) • Einkopplung in Lichtleiter Features • package: colored, clear 3 mm (T1) package with specially shaped lens • feature of the device: for backlighting and LCDs with use of a reflector; solder leads with stand-off • wavelength: 628 nm (super-red), 606 nm (orange), 587 nm (yellow), 570 nm (green), 560 nm (pure green) • viewing angle: matched to use with external reflector, see diagram • technology: GaAlP (super-red, orange, yellow, green), GaP (pure green) • optical efficiency: 1.5 lm/W (super-red, orange, yellow), 2.5 lm/W (green), 0.6 lm/W (pure green) • grouping parameter: luminous flux • soldering methods: TTW soldering • packing: bulk, available taped on reel Applications • • • • use of reflector optical indicators backlighting (LCD, switches, keys, displays) interior automotive lighting (e.g. dashboard backlighting, etc.) • coupling into light guides 2002-03-15 1 LS K380, LO K380, LY K380, LG K380, LP K380 Typ Type Emissionsfarbe Color of Emission super-red Gehäusefarbe Color of Package red clear Lichtstrom Luminous Flux IF = 15 mA ΦV (mlm) 11.2 ... 71.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ... 112.0 28.0 ... 180.0 11.2 ... 71.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ... 112.0 28.0 ... 180.0 11.2 ... 71.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ... 112.0 28.0 ... 180.0 11.2 ... 71.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ... 112.0 28.0 ... 180.0 7.1 ... 11.2 ... 18.0 ... 28.0 ... 11.2 ... 45.0 18.0 28.0 45.0 71.0 Bestellnummer Ordering Code LS K380-LP LS K380-N LS K380-P LS K380-Q LS K380-NR LO K380-LP LO K380-N LO K380-P LO K380-Q LO K380-NR LY K380-LP LY K380-N LY K380-P LY K380-Q LY K380-NR LG K380-LP LG K380-N LG K380-P LG K380-Q LG K380-NR LP K380-KN LP K380-L LP K380-M LP K380-N LP K380-LP Q62703-Q1768 Q62703-Q0760 Q62703-Q1003 Q62703-Q1004 Q62703-Q2223 Q62703-Q1888 Q62703-Q2227 Q62703-Q2228 Q62703-Q2229 Q62703-Q2201 Q62703-Q1769 Q62703-Q0575 Q62703-Q0576 Q62703-Q3844 Q62703-Q2224 Q62703-Q1770 Q62703-Q0759 Q62703-Q1034 Q62703-Q3193 Q62703-Q2225 Q62703-Q2506 Q62703-Q3215 Q62703-Q2610 Q62703-Q2605 Q62703-Q3217 orange orange clear yellow yellow clear green green clear pure green colorless clear Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±11 % ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ±11 %. Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe oder mindestens zwei Einzelgruppen. In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Die technologiebedingte Helligkeits-Streuung der heutigen LED-Herstellprozesse über einen längeren Fertigungszeitraum (Halbleitermaterial - Chipherstellung - Montageprozess) erlaubt keine Zusage einer einzelnen Helligkeitsgruppe. Daher müssen mindestens zwei Helligkeitsgruppen vorgesehen werden! Note: The standard shipping format for serial types includes a lower or upper family group or at least two individual groups. No packing unit / tape ever contains more than one luminous intensity group. Luminosity variations caused by the technology used in current LED manufacturing processes over a protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean that it is not possible to assign LEDs to a single luminous intensity group. For this reason at least two luminous intensity groups must be provided!. 2002-03-15 2 LS K380, LO K380, LY K380, LG K380, LP K380 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol LS, LO, LY, LG Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stoßstrom Surge current t ≤ 10 µs, D = 0.005 Sperrspannung Reverse voltage Leistungsaufnahme Power consumption Wert Value LP °C °C °C mA A Einheit Unit Top Tstg Tj IF IFM – 55 … + 100 – 55 … + 100 + 100 40 30 0.5 VR Ptot 130 5 95 V mW Wärmewiderstand 1) Thermal resistance Sperrschicht/Umgebung Rth JA Junction/ambient Rth JS Sperrschicht/Lötpad Junction/solder point Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2) mounted on PC board FR 4 (pad size ≥ 16 mm 2) Minimale Beinchenlänge Minimum lead length 1) 400 180 K/W K/W Rth erhöht sich um 13 K/W pro mm Beinchenlänge. Each additional 1 mm of lead length increases Rth by 13 K/W. 2002-03-15 3 LS K380, LO K380, LY K380, LG K380, LP K380 Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Wellenlänge des emittierten Lichtes Wavelength at peak emission IF = 15 mA Dominantwellenlänge 1) Dominant wavelength IF = 15 mA Spektrale Bandbreite bei 50 % Φrel max Spectral bandwidth at 50 % Φrel max IF = 15 mA Durchlassspannung 2) Forward voltage IF = 15 mA Sperrstrom Reverse current VR = 5 V Temperaturkoeffizient von λpeak Temperature coefficient of λpeak IF = 15 mA; –10°C ≤ T ≤ 100°C Temperaturkoeffizient von λdom Temperature coefficient of λdom IF = 15 mA; –10°C ≤ T ≤ 100°C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 15 mA; –10°C ≤ T ≤ 100°C Optischer Wirkungsgrad Optical efficiency IF = 15 mA 1) Symbol Symbol LS (typ.) LO Wert Value LY 586 LG 572 LP 557 635 610 Einheit Unit nm λpeak λdom ∆λ (typ.) 628 606 587 570 560 nm (typ.) 45 40 45 25 22 nm (typ.) (max.) (typ.) (max.) (typ.) VF VF IR IR TCλpeak 2.1 2.5 2.1 2.5 2.1 2.5 2.1 2.5 2.1 2.5 V V 0.01 0.01 0.01 0.01 0.01 µA 10 10 10 10 10 µA 0.11 0.12 0.10 0.11 0.11 nm/K (typ.) TCλdom 0.07 0.07 0.07 0.07 0.05 nm/K (typ.) TCV –1.9 –1.9 –1.9 –1.4 –2.1 mV/K (typ.) ηopt 1.5 1.5 1.5 2.5 0.6 lm/W Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm. Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V. 2) 2002-03-15 4 LS K380, LO K380, LY K380, LG K380, LP K380 Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 15 mA Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit Standard eye response curve 100 % OHL01697 I rel 80 Vλ 60 pure-green orange 20 0 400 450 500 green 550 yellow 40 600 super-red 650 λ nm 700 Abstrahlcharakteristik Irel = f (ϕ) Radiation Characteristic 40˚ 30˚ 20˚ 10˚ ϕ 0˚ 1.0 OHL01277 50˚ 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 90˚ 100˚ 1.0 2002-03-15 0 0.8 0.6 0.4 0˚ 5 20˚ 40˚ 60˚ 80˚ 100˚ 120˚ LS K380, LO K380, LY K380, LG K380, LP K380 Durchlassstrom IF = f (VF) Forward Current TA = 25 °C 10 2 OHL02145 Relativer Lichtstrom ΦV/ΦV(15 mA) = f (IF) Relative Luminous Flux TA = 25 °C 10 1 OHL02103 I F mA Φv Φ v (15mA) 10 0 10 1 5 10 -1 pure-green 10 0 5 super-red orange/yellow green 1.4 1.8 2.2 2.6 3.0 V 3.4 10 -2 red green yellow super-red pure-green 10 -1 10 -1 1.0 10 -3 10 0 10 1 mA 10 2 VF IF Maximal zulässiger Durchlassstrom IF = f (T) Max. Permissible Forward Current LS, LO, LY, LG 50 OHL00538 Maximal zulässiger Durchlassstrom IF = f (T) Max. Permissible Forward Current LP 40 OHL00984 ΙF mA TS temp. solder point TA temp. ambient IF mA TS temp. solder point TA temp. ambient 40 30 TA 30 TS TA 20 TS 20 10 10 0 0 20 40 60 80 ˚C 100 0 0 20 40 60 80 ˚C 100 T 2002-03-15 6 T LS K380, LO K380, LY K380, LG K380, LP K380 Relativer Lichtstrom ΦV / ΦV(25 °C) = f (TA) Relative Luminous Flux IF = 15 mA 2.0 OHL02107 Φ V(25 ˚C) ΦV 1.6 1.2 yellow green 0.8 orange super-red pure-green 0.4 0.0 0 20 40 60 80 ˚C 100 TA Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 °C LS, LO, LY, LG 10 4 OHL01162 Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 °C LP 10 3 OHL01686 I F mA tP t D= P T IF T IF mA D= tP T tP IF T 0.01 0.02 0.05 0.1 D = 0.005 10 5 3 0.1 0.2 10 2 0.5 5 DC D = 0.005 0.01 0.02 0.05 10 2 0.2 5 0.5 DC 10 1 10 -5 10 -4 10 -3 10 -2 10 -1 10 s 10 0 1 10 1 -5 10 10 -4 10 -3 10 -2 10 -1 10 0 s 10 1 tp 2002-03-15 7 tp LS K380, LO K380, LY K380, LG K380, LP K380 Maßzeichnung Package Outlines Area not flat ø3.1 (0.122) 3.5 (0.138) 2.9 (0.114) ø2.8 (0.110) 0.4 (0.016) 0.7 (0.028) 0.4 (0.016) 0.8 (0.031) 0.6 (0.024) 0.4 (0.016) 3.6 (0.142) 3.2 (0.126) 2.54 (0.100) spacing 1.1 (0.043) 1.8 (0.071) 1.2 (0.047) 0.9 (0.035) 0.6 (0.024) 2.35 (0.093) 2.05 (0.081) 4.8 (0.189) 4.4 (0.173) GEXY6712 0.4 (0.016) Cathode 29.0 (1.142) 27.0 (1.063) Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Kathodenkennung: kürzerer Lötspieß Cathode mark: short solder lead Gewicht / Approx. weight: 160 mg 2002-03-15 8 LS K380, LO K380, LY K380, LG K380, LP K380 Lötbedingungen Soldering Conditions Wellenlöten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) 300 C T 250 235 C ... 260 C OHLY0598 10 s Normalkurve standard curve 2. Welle 2. wave Grenzkurven limit curves 200 1. Welle 1. wave 150 100 C ... 130 C 100 2 K/s 50 Zwangskühlung forced cooling ca 200 K/s 5 K/s 2 K/s 0 0 50 100 150 t 200 s 250 Empfohlenes Lötpaddesign Recommended Solder Pad Wellenlöten (TTW) TTW Soldering 4 (0.157) OHLPY985 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2002-03-15 4.8 (1.890) 9 LS K380, LO K380, LY K380, LG K380, LP K380 Revision History: 2002-03-15 Previous Version: Page 3 4 2001-02-14 Subjects (major changes since last revision) thermal resistance (footnote) value (wavelength orange) Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2002-03-15 10 This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.