SFH2505FA

Silizium-PIN-Fotodiode mit sehr kurzer Schaltzeit in SMR® Gehäuse Silicon PIN Photodiode with Very Short Switching Time in SMR® Package Lead (Pb) Free Product - RoHS Compliant SFH 2500/FA SFH 2505/FA SFH 2500 SFH 2500FA SFH 2505 SFH 2505FA Wesentliche Merkmale • Speziell geeignet für Anwendungen im Bereich von 400 nm bis 1100 nm (SFH 2500/2505) und bei 880 nm (SFH 2500 FA/2505 FA) • SMR® (Surface Mount Radial) Gehäuse • Kurze Schaltzeit (typ. 5 ns) • Passend zu IRED SFH 451x, SFH 458x, SFH 450x • Für Oberflächenmontage (SMT) geeignet • Gegurtet lieferbar Anwendungen • Industrieelektronik • „Messen/Steuern/Regeln“ • Schnelle Lichtschranken für Gleich- und Wechselbetrieb • Datenübertragung Features • Especially suitable for applications from 400 nm to 1100 nm (SFH 2500/2505) and of 880 nm (SFH 2500 FA/2505 FA) • SMR® (Surface Mount Radial) package • Short switching time (typ. 5 ns) • Matches IRED SFH 451x, SFH 458x, SFH 450x • Suitable for surface mounting (SMT) • Available on tape and reel Applications • • • • Industrial electronics For control and drive circuits Photointerrupters Data transmission 2007-04-03 1 SFH 2500/FA, SFH 2505/FA Typ Type SFH 2500 SFH 2505 SFH 2500 FA SFH 2505 FA Bestellnummer Ordering Code Q65110A1201 Q65110A1203 Q65110A1202 Q65110A1204 Gehäuse Package 5-mm-SMR®-Gehäuse (T 1 3/4), klares (SFH 2500/2505) und schwarz eingefärbtes (SFH 2500 FA/2505 FA) Epoxy-Gießharz, Anschlüsse (SFH 2500/2500 FA gebogen, SFH 2505/2505 FA gerade) im 2.54-mm-Raster (1/10’’), Kathodenkennzeichnung: siehe Maßzeichnung. 5 mm SMR® package (T 1 3/4), clear (SFH 2500/2505) and black-colored (SFH 2500 FA/2505 FA) epoxy resin, solder tabs (SFH 2500/2500 FA bent, SFH 2505/2505 FA straight) lead spacing 2.54 mm (1/10’’), cathode marking: see package outline. Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebs- und Lagertemperatur Operating and storage temperature range Sperrspannung Reverse voltage Verlustleistung Total power dissipation Symbol Symbol Wert Value – 40 … + 85 50 100 Einheit Unit °C V mW Top; Tstg VR Ptot 2007-04-03 2 SFH 2500/FA, SFH 2505/FA Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Symbol Symbol SFH 2500 SFH 2505 Fotostrom Photocurrent VR = 5 V, Normlicht/standard light A, T = 2856 K, EV = 1000 lx VR = 5 V, λ = 870 nm, Ee = 1 mW/cm2 Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. sensitivity Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax Bestrahlungsempfindliche Fläche Radiant sensitive area Wert Value SFH 2500 FA SFH 2505 FA Einheit Unit IP IP λS max λ 100 70 (> 50) 850 400 … 1100 – 70 (> 50) 900 750 … 1100 μA μA nm nm A 1 1×1 ± 15 0.1 (≤ 5) 1 1×1 ± 15 0.1 (≤ 5) mm2 mm×mm Grad deg. nA Abmessung der bestrahlungsempfindlichen Fläche L × B Dimensions of radiant sensitive area L×W Halbwinkel Half angle Dunkelstrom, VR = 20 V Dark current Leerlaufspannung Open-circuit voltage Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 0.5 mW/cm2, λ = 870 nm Kurzschlussstrom Short-circuit current Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 1.0 mW/cm2, λ = 870 nm Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 50 Ω; VR = 20 V; λ = 850 nm; Ip = 800 μA Kapazität, VR = 0 V, f = 1 MHz, E = 0 Capacitance ϕ IR VO VO 430 390 (> 320) – 390 (> 320) mV mV ISC ISC tr , tf 100 70 5 – 70 5 μA μA ns C0 11 11 pF 2007-04-03 3 SFH 2500/FA, SFH 2505/FA Kennwerte (TA = 25 °C) Characteristics (cont’d) Bezeichnung Parameter Symbol Symbol SFH 2500 SFH 2505 Temperaturkoeffizient von VO Temperature coefficient of VO Temperaturkoeffizient von ISC Temperature coefficient of ISC Normlicht/standard light A λ = 870 nm Rauschäquivalente Strahlungsleistung Noise equivalent power VR = 20 V, λ = 850 nm Nachweisgrenze, VR = 20 V, λ = 850 nm Detection limit Wert Value SFH 2500 FA SFH 2505 FA – 2.6 mV/K Einheit Unit TCV – 2.6 TC I NEP 0.18 0.1 2.9 × 10– 14 – 0.1 2.9 × 10– 14 %/K W ----------Hz cm × Hz ------------------------W D* 3.5 × 1012 3.5 × 1012 2007-04-03 4 SFH 2500/FA, SFH 2505/FA Relative Spectral Sensitivity Srel = f (λ) SFH 2500/2505 100 S rel % 80 OHF01034 Relative Spectral Sensitivity Srel = f (λ) SFH 2500 FA/2505 FA 100 S rel % 80 OHF01773 Photocurrent IP = f (Ev), VR = 5 V Open-Circuit Voltage VO = f (Ev) SFH 2500/2505 ΙP μA 10 3 OHF00301 10 4 mV VO 10 3 10 2 VO 60 60 10 1 40 10 2 40 ΙP 10 0 20 10 1 20 0 400 600 800 1000 nm 1200 λ 0 400 600 800 1000 nm 1200 λ 10 -1 10 0 10 1 10 2 10 3 Ev 10 0 lx 10 4 Photocurrent IP = f (Ee), VR = 5 V Open-Circuit-Voltage VO = f (Ee) SFH 2500 FA/2505 FA ΙP Total Power Dissipation Ptot = f (TA) 120 mW 100 OHF00392 Dark Current IR = f (VR), E = 0 10 4 pA OHF01026 μA 10 3 OHF00302 10 4 mV VO 10 3 Ptot ΙR 10 2 VO 10 1 80 10 3 10 2 60 ΙP 40 10 0 10 1 10 2 20 10 -1 10 -3 10 0 10 1 10 -2 10 -1 mW/cm 2 Ee 0 0 20 40 60 80 100 ˚C 120 TA 10 1 0 10 20 V VR 30 Directional Characteristics Srel = f (ϕ) 40 30 20 10 0 1.0 OHF00303 ϕ 50 0.8 60 0.6 70 0.4 80 90 0.2 0 100 1.0 0.8 0.6 0.4 0 20 40 60 80 100 120 2007-04-03 5 SFH 2500/FA, SFH 2505/FA Maßzeichnung Package Outlines SFH 2500/FA 7.5 (0.295) 5.5 (0.217) 2.8 (0.110) 2.4 (0.094) 3.7 (0.146) 3.3 (0.130) 2.7 (0.106) 2.4 (0.094) Chip position 4.5 (0.177) 3.9 (0.154) 2.05 (0.081) R 1.95 (0.077) ((3.2) (0.126)) ((R2.8 (0.110)) ((3.2) (0.126)) 6.0 (0.236) 5.4 (0.213) 4.8 (0.189) 14.7 (0.579) 13.1 (0.516) 2.54 (0.100) spacing Cathode/ Collector 4.5 (0.177) 3.9 (0.154) 7.7 (0.303) 7.1 (0.280) -0.1...0.2 (-0.004...0.008) 4.4 (0.173) GEOY6968 SFH 2505/FA 8.0 (0.315) 7.4 (0.291) Chip position 4.5 (0.177) 3.9 (0.154) 2.05 (0.081) R 1.95 (0.077) 15.5 (0.610) 14.7 (0.579) 2.7 (0.106) 2.4 (0.094) -0.15...0.15 (-0.006...0.006) ((3.2) (0.126)) ((R2.8 (0.110)) ((3.2) (0.126)) 6.0 (0.236) 5.4 (0.213) 2.54 (0.100) spacing Cathode/ Collector 4.5 (0.177) 3.9 (0.154) 7.7 (0.303) 7.1 (0.280) 4.8 (0.189) 4.4 (0.173) GEOY6969 Maße in mm (inch) / Dimensions in mm (inch). 2007-04-03 6 SFH 2500/FA, SFH 2505/FA Lötbedingungen Soldering Conditions Reflow Lötprofil für bleifreies Löten Reflow Soldering Profile for lead free soldering 300 ˚C 255 ˚C 240 ˚C 217 ˚C 200 30 s max 150 120 s max 100 Ramp Up 3 K/s (max) 25 ˚C 0 0 50 100 150 200 250 s 300 100 s max Ramp Down 6 K/s (max) 10 s min Vorbehandlung nach JEDEC Level 3 Preconditioning acc. to JEDEC Level 3 (nach J-STD-020C) (acc. to J-STD-020C) OHLA0687 T 250 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile ˚C 260 ˚C +0˚C -5 ±5 ˚C 245 ˚C ˚C 235 ˚C +5˚C -0 50 t Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-04-03 7