1N4005-T

NOT RECOMMENDED FOR NEW DESIGN USE S1A-S1M series 1N4001 - 1N4007 1.0A RECTIFIER Features  Diffused Junction  High Current Capability and Low Forward Voltage Drop  Surge Overload Rating to 30A Peak  Low Reverse Leakage Current  Lead Free Finish, RoHS Compliant (Note 3) Mechanical Data DO-41 Plastic Min Max A 25.40  B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 All Dimensions in mm Dim  Case: DO-41  Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0  Moisture Sensitivity: Level 1 per J-STD-020D  Terminals: Finish - Bright Tin. Plated Leads Solderable per MIL-STD-202, Method 208  Polarity: Cathode Band  Ordering Information: See Page 2  Marking: Type Number  Weight: 0.30 grams (Approximate) Maximum Ratings and Electrical Characteristics (@TA = +25°C unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage VRWM DC Blocking Voltage VR RMS Reverse Voltage VR(RMS) Average Rectified Output Current (Note 1) @ TA =+75C IO Non-Repetitive Peak Forward Surge Current 8.3ms IFSM Single Half Sine-Wave Superimposed on Rated Load Forward Voltage @ IF = 1.0A VFM Peak Reverse Current @TA = +25C IRM at Rated DC Blocking Voltage @ TA = +100C Typical Junction Capacitance (Note 2) Cj Typical Thermal Resistance Junction to Ambient RJA Maximum DC Blocking Voltage Temperature TA Operating and Storage Temperature Range TJ, TSTG Notes: 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit 50 100 200 400 600 800 1000 V 35 70 140 280 1.0 420 560 700 V A 30 A 1.0 5.0 50 V 15 A 8 100 +150 -65 to +150 pF K/W C C 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 3. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 1N4001-1N4007 Document number: DS28002 Rev. 9 - 3 1 of 3 www.diodes.com September 2014 © Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) NOT RECOMMENDED FOR NEW DESIGN USE S1A-S1M series 1.0 0.8 0.6 0.4 0.2 0 40 60 80 100 120 140 160 10 1.0 0.1 Tj, = 25oC Pulse Width = 300 s 2% Duty Cycle 0.01 0.6 180 TA, AMBIENT TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 0.8 1.0 1.2 1.4 1.6 V F, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 50 100 f = 1MHz 40 Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) Tj = 25ºC 30 20 1N4001 - 1N4004 10 1N4005 - 1N4007 10 0 1.0 1.0 10 1.0 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current Ordering Information (Note 4) Device 1N4001-B 1N4001-T 1N4002-B 1N4002-T 1N4003-B 1N4003-T 1N4004-B 1N4004-T 1N4005-B 1N4005-T 1N4006-B 1N4006-T 1N4007-B 1N4007-T Note: Packaging DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic DO-41 Plastic Shipping 1K/Bulk 5K/Tape & Reel, 13-inch 1K/Bulk 5K/Tape & Reel, 13-inch 1K/Bulk 5K/Tape & Reel, 13-inch 1K/Bulk 5K/Tape & Reel, 13-inch 1K/Bulk 5K/Tape & Reel, 13-inch 1K/Bulk 5K/Tape & Reel, 13-inch 1K/Bulk 5K/Tape & Reel, 13-inch 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. 1N4001-1N4007 Document number: DS28002 Rev. 9 - 3 2 of 3 www.diodes.com September 2014 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN USE S1A-S1M series IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com 1N4001-1N4007 Document number: DS28002 Rev. 9 - 3 3 of 3 www.diodes.com September 2014 © Diodes Incorporated