AH3563Q-P-A

AH3563Q HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH Description Pin Assignments The AH3563Q is an AEC-Q100 qualified high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for position and proximity sensing in automotive applications, such as in seat and seatbelt buckle, steering lock/immobilization, gear stick, transmission actuator and gear position, HVAC compression, wiper, door/trunk closure, and so on. To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. With chopper-stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3563Q provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a zener clamp on the supply. The output has an overcurrent limit and a zener clamp. (Top View) 3 OUTPUT GND 2 1 VDD SOT23 (Top View) 3. OUTPUT 2. GND The single open-drain output can be switched on with south or north pole of sufficient strength. When the magnetic flux density (B) perpendicular to the package is larger than the operate point (BOP), 1. VDD SIP-3 (Bulk Pack) the output is switched on (pulled low) and is held on until the magnetic flux density B is lower than the release point (BRP). Features Applications • • Omnipolar Operation High Sensitivity: BOP and BRP of ±30G and ±20G Typical • • • Single Open-Drain Output with Overcurrent Limit 3.0V to 28V Operating Voltage Range Chopper Stabilized Design Provides • Superior Temperature Stability • Minimal Switch Point Drift • Enhanced Immunity to Stress Good RF Noise Immunity Reverse Blocking Diode Zener Clamp on Supply and Output Pins -40°C to +150°C Operating Temperature ESD: HBM > 8kV, CDM > 2kV Industry Standard SOT23 and SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) Packages Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) The AH3563Q is suitable for automotive applications requiring specific change control; this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. • • • • • • • • • • • • • • • • • Position and Proximity Sensing in Automotive Applications Open and Close Detect Position Detect Level Detect Flow Meters Contactless Switches Seatbelt Buckle Seat Position https://www.diodes.com/quality/product-definitions/ Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain BOP (Note 10 ) IDD = 5mA 30 28 — — 55 — mA V 7. When power is initially turned on, VDD must be within its correct operating range (3.0V to 28V) to guarantee the output sampling. The output state is valid after the start-up time of 10µs typical from the operating voltage reaching 3V. 8. Typical values are defined at TA = +25°C, VDD = 12V. Maximum and minimum values over the operating temperature range is not tested in production but guaranteed by design, process control, and characterization. 9. Guaranteed by design, process control, and characterization. Not tested in production. 10. The device will limit the output current IOUT to current limit of IOC. AH3563Q Document number: DS40865 Rev. 3 - 2 3 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Magnetic Characteristics (Notes 11 and 12) (TA = -40°C to +150°C, VDD = 3.0V to 28V, unless otherwise specified.) Symbol Parameter Condition BOPS (South Pole to the Part Marking Side) Operation Point BOPN (North Pole to the Part Marking Side) BRPS (South Pole to the Part Marking Side) Release Point BRPN (South Pole to the Part Marking Side) Hysteresis (Note 13) BHY (|BOPX|-|BRPX|) Notes: (1mT = 10 Gauss) Max Unit Min Typ VDD = 12V, TA = +25°C — 30 — TA = -40°C to +150°C 15 30 45 VDD = 12V, TA = +25°C — -30 — TA = -40°C to +150°C -45 -30 -15 VDD = 12V, TA = +25°C — 20 — TA = -40°C to +150°C 5 20 35 VDD = 12V, TA = +25°C — -20 — TA = -40°C to +150°C -35 -20 -5 VDD = 12V, TA = +25°C — 10 — TA = -40°C to +150°C 5 10 18 Gauss 11. When power is initially turned on, VDD must be within its correct operating range (3.0V to 28V) to guarantee the output sampling. The output state is valid after the start-up time of 10µs typical from the operating voltage reaching 3V. 12. Typical values are defined at TA = +25°C, VDD = 12V. Maximum and minimum values over the operating temperature range is not tested in production but guaranteed by design, process control and characterization. 13. Maximum and minimum hysteresis is guaranteed by design, process control and characterization. Output (Off-state) BHY Turn off VSAT ( Output Voltage ) Turn on (Off-state) VDD Turn on (On-state) VOUT_ON = VSAT 0 BOPN BRPN BHY Turn off BRPS BOPS ( Magnetic Flux Density B ) S S Part Mark Part Mark N N (SOT23) AH3563Q Document number: DS40865 Rev. 3 - 2 SIP-3 (Ammo Pack) SIP-3 (Bulk Pack) 4 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Typical Operating Characteristics Output Switch Operate and Release Points (Magnetic Thresholds) — BOPS and BRPS Supply Current AH3563Q Document number: DS40865 Rev. 3 - 2 5 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Typical Operating Characteristics (Continued) Supply Reverse Current Output Switch On Voltage Output Switch Leakage Current AH3563Q Document number: DS40865 Rev. 3 - 2 6 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Typical Operating Characteristics (Continued) Output Current Limit AH3563Q Document number: DS40865 Rev. 3 - 2 7 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Thermal Performance Characteristics (1) Package Type: SOT23 TA (°C) 25 50 60 70 80 85 90 100 105 110 120 125 130 140 150 PD (mW) 230 184 166 147 129 120 110 92 83 74 55 46 37 18 0 Power Dissipation Curve PD, POWER DISSIPATION (mW) 300 200 100 0 0 -40 25 50 75 100 125 150 TA AMBIENT TEMPERATURE (oC) (2) Package Type: SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) TA (°C) 25 50 60 70 80 85 90 100 105 110 120 125 130 140 150 PD (mW) 550 440 396 362 308 286 264 220 198 176 132 110 88 44 0 PD (mW) Power Dissipation Curve 600 500 400 300 200 100 0 0 -40 25 50 75 100 125 150 TA (°C) AH3563Q Document number: DS40865 Rev. 3 - 2 8 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Ordering Information AH3563Q - X - X Package Product Name P : SIP-3(Ammo Pack) P : SIP-3(Bulk Pack) SA : SOT23 Bulk Part Number Package Code Packaging AH3563Q-P-A AH3563Q-P-B P P AH3563Q-SA-7 SA Notes: Packing 7 : Tape & Reel A: Ammo Box (Note 14) B: Bulk (Note 15) Ammo Box Quantity Part Number Suffix Quantity Part Number Suffix SIP-3 (Ammo Pack) SIP-3 (Bulk Pack) NA 1000 NA -B 4,000/Box NA -A NA SOT23 NA NA NA NA 7” Tape and Reel Part Quantity Number Suffix NA NA 3,000/Tape & Reel NA NA -7 14. Ammo Box is for SIP-3 (Ammo Pack) Spread Lead. 15. Bulk is for SIP-3 (Bulk Pack) Straight Lead. Marking Information (1) Package Type: SOT23 ( Top View ) XX Y W X XX : Identification Code Y : Year 0 to 9 W : Week : A to Z : 1 to 26 Week; a to z : 27 to 52 Week; z Represents 52 and 53 Week X : Internal Code Part Number AH3563Q-SA-7 (2) Package SOT23 Identification Code Z3 Package Type: SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) ( Top View ) Identification Code 3563Q Y WW X Y : Year : 0 to 9 WW : Week : 01 to 52, "52" Represents 52 and 53 Week X : Internal Code Part Number Package Identification Code AH3563Q-P-A AH3563Q-P-B SIP-3 (Ammo Pack) SIP-3 (Bulk Pack) 3563Q 3563Q AH3563Q Document number: DS40865 Rev. 3 - 2 9 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Package Outline Dimensions (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. (1) Package Type: SOT23 All 7° H K1 J K SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.890 1.00 0.975 K1 0.903 1.10 1.025 L 0.45 0.61 0.55 L1 0.25 0.55 0.40 M 0.085 0.150 0.110 a 0° 8° — All Dimensions in mm GAUGE PLANE 0.25 a M A L C L1 B D F G 0.17/0.37 Min/Max 0.5/0.7 PART MARKING SURFACE Die Hall Sensor Pin1 1.4/1.5 Sensor Location AH3563Q Document number: DS40865 Rev. 3 - 2 10 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Package Outline Dimensions (Continued) (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. (2) Package Type: SIP-3 (Bulk Pack) a4 a3(2 x (2 x S x) (2 a1 (2 A x) J SIP-3 (Bulk Pack) Dim Min Max Typ A 1.40 1.60 1.50 b 0.33 0.43 0.38 b2 0.40 0.508 0.46 c 0.35 0.41 0.38 D 3.90 4.30 4.10 E 2.80 3.20 3.00 e1 1.24 1.30 1.27 F 0.00 0.20 -J 2.62 REF L 14.00 15.00 14.50 L1 1.55 1.75 1.65 S 0.63 0.84 0.74 -a1 -5 -a2 -5 -a3 -45 -a4 -3 All Dimensions in mm a2 D E b2 L1 F L b e1 c Min/Max 0.63/0.84 0.27/0.48 1.90/2.10 PART MARKING SURFACE Hall Sensor 1 2 Die 1.05/1.25 PART MARKING SURFACE 3 Sensor Location AH3563Q Document number: DS40865 Rev. 3 - 2 11 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Package Outline Dimensions (Continued) (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. (3) Package Type: SIP-3 (Ammo Pack) a4 (2 D J x) a1 SIP-3 (Ammo Pack) Dim Min Max Typ A 1.40 1.60 1.50 b 0.33 0.43 0.38 b2a 0.40 0.52 0.46 c 0.35 0.41 0.38 D 3.90 4.30 4.10 E 2.80 3.20 3.00 e1 1.24 1.30 1.27 e2 2.40 2.90 2.65 F 0.00 0.20 — J 2.62 REF L 14.00 15.00 14.50 La 12.90 14.90 13.90 L1 1.55 1.75 1.65 L3 2.00 3.00 2.50 S 0.63 0.84 0.74 — — a1 5 — — a2 5 — — a3 45 — — a4 3 All Dimensions in mm S (2 A x x a2 x) a3(2 (2 E L3 b2a L1 F e1 La L e2 c b Min/Max 0.63/0.84 0.27/0.48 1.90/2.10 PART MARKING SURFACE Hall Sensor 1 2 Die 1.05/1.25 PART MARKING SURFACE 3 Sensor Location AH3563Q Document number: DS40865 Rev. 3 - 2 12 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. (1) Package Type: SOT23 Dimensions C X X1 Y Y1 Y C Y1 X Value (in mm) 2.0 0.8 1.35 0.9 2.9 X1 Mechanical Data SOT23 Package • • • Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.009 grams (Approximate) SIP-3 (Bulk Pack), SIP-3 (Ammo Pack) Packages • • • Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.12 grams (Approximate) AH3563Q Document number: DS40865 Rev. 3 - 2 13 of 14 www.diodes.com December 2020 © Diodes Incorporated AH3563Q IMPORTANT NOTICE 1. DIODES INCORPORATED AND ITS SUBSIDIARIES (“DIODES”) MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes products. Diodes products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of the Diodes products for their intended applications, (c) ensuring their applications, which incorporate Diodes products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications. 3. Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. 6. Diodes products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is prohibited under any applicable laws and regulations. Should customers or users use Diodes products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may contain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. Copyright © 2020 Diodes Incorporated www.diodes.com AH3563Q Document number: DS40865 Rev. 3 - 2 14 of 14 www.diodes.com December 2020 © Diodes Incorporated