FDC05-48S15

FEATURES • 5 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 1000mA • STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE • HIGH EFFICIENCY UP TO 83% • 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC Negative & Positive logic Remote On/Off APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment OPTIONS DESCRIPTION The FDC05 and FDC05-W series offer 5 watts of output power from a 2 x 1 x 0.4 inch package without derating to 71ºC ambient temperature. FDC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. FDC05-W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC. All specifications are typical at nominal input, full load and 25ºC otherwise noted T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load Line regulation INPUT SPECIFICATIONS 12V nominal input 9 – 18VDC 24V nominal input 18 – 36VDC Input voltage range 48V nominal input 36 – 75VDC FDC05-W 24V nominal input 9 – 36VDC 48V nominal input 18 – 75VDC Input filter Pi type 12V input 36VDC Input surge voltage 100mS max 24V input 50VDC 48V input 100VDC Input reflected ripple current Nominal Vin and full load 20mAp-p Nominal Vin and Power up 450mS, max. Start up time Constant resistive load Remote ON/OFF (Option) (Note 6) (Positive logic) DC-DC ON Open or 3.5V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V (Negative logic) DC-DC ON Short or 0V < Vr < 1.2V Open or 3.5V < Vr < 12V DC-DC OFF Input current of remote control pin Nominal Vin -0.5mA ~ +1mA Remote off state input current Nominal Vin 2.5mA FDC05 5 Watts, max. Full load and nominal Vin ± 1% 0% LL to HL at Full Load ± 0.2% Single ± 0.2% Load regulation No load to Full load Dual ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ±0.02% / ºC, max. Transient response 25% load step change Single 200μS recovery time FL to 1/2 FL ±1% error band Dual 200μS Over load protection % of FL at nominal input 170%, typ. Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency Isolation Voltage Isolation resistance Isolation capacitance Switching frequency Approvals and standard Case material Base material Potting material Dimensions Weight MTBF (Note 1) Input to Output to Case 9 See table 1600VDC, min. 10 ohms, min. 300pF, max. Standard 300KHz, typ. “W” series 200KHz, typ. IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper Non-conducted black plastic Epoxy (UL94-V0) 2.00 X 1.00 X 0.40 Inch (50.8 X 25.4 X 10.2 mm) 27g (0.95oz) 6 BELLCORE TR-NWT-000332 3.145 x 10 hrs 6 MIL-HDBK-217F 2.326 x 10 hrs ENVIRONMENTAL SPECIFICATIONS Operating ambient Standard -25ºC ~ +85ºC (with derating) temperature M1 (Note 7) -40ºC ~ +85ºC (non-derating) (Reference derating curve) M2 (W series) -40ºC ~ +85ºC (with derating) Maximum case temperature +100ºC Storage temperature range -55ºC ~ +105ºC Nature convection 12ºC/watt Thermal impedance (Note 8) Nature convection with heat-sink 10ºC/watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI ESD EN55022 EN61000-4-2 Air Contact Class A ± 8KV Perf. Criteria B ± 6KV 10 V/m Perf. Criteria A ± 2KV Perf. Criteria B Radiated immunity EN61000-4-3 Fast transient (Note 9) EN61000-4-4 Surge (Note 9) Conducted immunity EN61000-4-5 EN61000-4-6 ± 1KV Perf. Criteria B 10 Vr.m.s Perf. Criteria A Page 1 of 2 Issued Date：2008/05/21 Model Number FDC05-12S33 FDC05-12S05 FDC05-12S12 FDC05-12S15 FDC05-12D05 FDC05-12D12 FDC05-12D15 FDC05-24S33 (W) FDC05-24S05 (W) FDC05-24S12 (W) FDC05-24S15 (W) FDC05-24D05 (W) FDC05-24D12 (W) FDC05-24D15 (W) FDC05-48S33 (W) FDC05-48S05 (W) FDC05-48S12 (W) FDC05-48S15 (W) FDC05-48D05 (W) FDC05-48D12 (W) FDC05-48D15 (W) Input Range 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC Output Current Input Current (4) Output Output Eff (4) Capacitor No load Full load (%) Load max(5) Voltage Min. load Full load Ripple & Noise (3) (2) 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 10mA 10mA 10mA 15mA 20mA 15mA 20mA 15(5mA) 15(5mA) 10(5mA) 20(5mA) 15(5mA) 20(5mA) 20(10mA) 5(5mA) 10(10mA) 10(10mA) 10(10mA) 10(5mA) 10(10mA) 10(10mA) 382mA 556mA 610mA 658mA 556mA 597mA 609mA 199 (188mA) 282 (274mA) 305 (301mA) 325 (325mA) 278 (274mA) 295 (295mA) 308 (301mA) 100 (100mA) 145 (145mA) 151 (151mA) 160 (163mA) 141 (141mA) 149 (149mA) 154 (154mA) 76 79 81 80 79 81 82 73 (77) 78 (80) 81 (82) 81 (81) 79 (80) 82 (82) 81 (83) 73 (73) 76 (76) 82 (82) 82 (81) 78 (78) 81 (81) 81 (81) 3700μF 1700μF 290μF 188μF ± 850μF ± 140μF ± 47μF 3700μF 1700μF 290μF 188μF ± 850μF ± 140μF ± 47μF 3700μF 1700μF 290μF 188μF ± 850μF ± 140μF ± 47μF Note 1. 2. 3. 4. 5. 6. 7. 8. 9. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. The ON/OFF control pin voltage is referenced to -Vin To order positive logic ON/OFF control add the suffix-P (Ex: FDC05-48S05-P) To order negative logic ON/OFF control add the suffix-N (Ex: FDC05-48S05-N) M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version. Heat sink is optional and P/N: 7G-0020C-F. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. FDC05-48S05 Derating Curve OUTPUT POWER(%) 120 100 80 60 40 20 0 OUTPUT POWER (%) FDC05-48S05 Derating Curve 8) With Heatsink (Note 5 ) 120 100 80 60 40 20 0 -40 -25 -10 5 81 -40 -25 -10 5 20 35 50 65 80 95 110 AMBIENT TEMPERATURE(℃) 20 35 50 65 80 95 110 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) 84 AMBIENT TEMPERATURE(℃) FDC05-48S05 Efficiency VS Input Voltage 83 81 79 77 75 73 71 69 36 40 44 48 52 56 60 64 68 72 INPUT VOLTAGE (V) 90 85 80 75 70 65 60 55 50 45 40 FDC05-48S05 Efficiency VS Output Load PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE + INPUT - INPUT + OUTPUT NO PIN - OUTPUT CTRL (Option) DUAL OUTPUT + INPUT - INPUT + OUTPUT COMMON - OUTPUT CTRL (Option) EFFICIENCY(%) EFFICIENCY(%) 10 20 30 40 50 60 70 80 OUTPUT LOAD (% of Full Load) 90 100 Page 2 of 2 Issued Date：2008/05/21