FED30-24S12W

FEATURES • 30 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 8.5A • STANDARD 2.00 X 1.00 X 0.40 INCH • HIGH EFFICIENCY UP TO 91% • 4:1 ULTRA WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 89/336 EEC • DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Semiconductor Equipment Negative logic Remote On/Off DESCRIPTION The FED30W series offer 30 watts of output power from a 2 x 1 x 0.4 inch package. FED30W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC. The FED30W have features 1600VDC of isolation, short circuit protection, over-current protection, over-voltage protection, over-temperature protection and six sided shielding. T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Voltage adjustability Minimum load Line regulation Full load and nominal Vin Single output All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS 30 Watts max. ±1% 9 – 36VDC 18 – 75VDC Input filter Pi type Input surge voltage 24V input 50VDC 100mS max 48V input 100VDC Input reflected ripple current Nominal Vin and full load 20mAp-p Nominal Vin and Power up 30mS, typ. Start up time constant resistive load Remote ON/OFF 30mS, typ. 24V input 9VDC Start-up voltage 48V input 18VDC 24V input 8VDC Shutdown voltage 48V input 16VDC Remote ON/OFF (Note 6) Open or 3V < Vr < 12V (Positive logic)(Standard) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Short or 0V < Vr < 1.2V DC-DC ON (Negative logic)(Option) Open or 3V < Vr < 12V DC-DC OFF Input current of Remote control pin Nominal Vin -0.5mA ~ +0.5mA Remote off state input current Nominal Vin 3mA Input voltage range 24V nominal input 48V nominal input ± 10% 0% LL to HL at Full Load ± 0.2% Single ± 0.5% Load regulation No load to Full load Dual ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% 1.5-5.1Vo 100mVp-p 20MHz bandwidth Ripple and noise (Measured with a 1uF/50V MLCC) 12-15Vo 150mVp-p ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 250μS 1.5V Output 2.0V 2.5V Output 3.3V Over voltage protection 3.3V Output 3.9V 5.0V & 5.1V & ±5V Zener diode clamp Output 6.2V 12V & ±12V Output 15V Output 18V 15V & ±15V Over load protection % of FL at nominal input 150%, typ. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC to +50ºC (without derating) +50ºC to +85ºC (with derating) Short circuit protection Hiccup, automatics recovery Maximum case temperature 105ºC GENERAL SPECIFICATIONS Storage temperature range -55ºC to +125ºC Efficiency See table Over temperature protection 115ºC, typ 1600VDC, min. Input to Output Isolation voltage Nature convection 12ºC/Watt 1600VDC, min. Thermal impedance Input (Output) to Case (Note 7) Nature convection with heat-sink 10ºC/Watt Case grounding Connect case to -Vin with decoupling Y Cap 9 Thermal shock MIL-STD-810F Isolation resistance 10 ohms, min. MIL-STD-810F Isolation capacitance 1500pF, max. Vibration Relative humidity 5% to 95% RH Switching frequency 430KHz,typ. EMC CHARACTERISTICS Design meets safety standard IEC60950-1, UL60950-1, EN60950-1 EN55022 Class A Case material Nickel-coated copper EMI (Note 8) Air ± 8KV Base material FR4 PCB ESD EN61000-4-2 Perf. Criteria A Contact ± 6KV Potting material Epoxy (UL94-V0) Dimensions Weight MTBF (Note 1) 2.00 X 1.00 X 0.40 Inch (50.8X 25.4 X 10.2 mm) 30.5g(1.07oz) 6 3.163 x 10 hrs. BELLCORE-TR-NWT-000332 5 MIL-HDBK-217F 4.347 x 10 hrs. Radiated immunity Surge (Note 9) Conducted immunity EN61000-4-3 EN61000-4-5 EN61000-4-6 10 V/m Perf. Criteria A ± 2KV Perf. Criteria A ± 1KV Perf. Criteria A 10 Vr.m.s Perf. Criteria A Fast transient (Note 9) EN61000-4-4 Page 1 of 3 Issued Date：2008/07/11 Model Number FED30-24S1P5W FED30-24S2P5W FED30-24S3P3W FED30-24S05W FED30-24S5P1W FED30-24S12W FED30-24S15W FED30-24D05W FED30-24D12W FED30-24D15W FED30-48S1P5W FED30-48S2P5W FED30-48S3P3W FED30-48S05W FED30-48S5P1W FED30-48S12W FED30-48S15W FED30-48D05W FED30-48D12W FED30-48D15W Input Range 9 – 36 VDC 9 – 36 VDC 9 – 36 VDC 9 – 36 VDC 9 – 36 VDC 9 – 36 VDC 9 – 36 VDC 9 – 36 VDC 9 – 36 VDC 9 – 36 VDC 18 – 75 VDC 18 – 75 VDC 18 – 75 VDC 18 – 75 VDC 18 – 75 VDC 18 – 75 VDC 18 – 75 VDC 18 – 75 VDC 18 – 75 VDC 18 – 75 VDC Output Voltage 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC Output Current Min. Load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA Max. Load 8500mA 8000mA 7500mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA 8500mA 8000mA 7500mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA Output (4) Ripple & Noise 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p Input Current No load 70mA 70mA 70mA 105mA 105mA 20mA 30mA 90mA 25mA 25mA 30mA 45mA 45mA 65mA 65mA 60mA 50mA 50mA 15mA 15mA (3) Full Load 700mA 1054mA 1258mA 1488mA 1517mA 1471mA 1471mA 1488mA 1506mA 1506mA 350mA 520mA 629mA 744mA 759mA 727mA 718mA 744mA 744mA 744mA (2) Eff (4) (%) 80 83 86 88 88 89 89 88 87 87 80 84 86 88 88 90 91 88 88 88 Capacitor(5) Load max. 20000μF 20000μF 20000μF 14400μF 14400μF 3000μF 2000μF ± 3000μF ± 2000μF ± 1300μF 20000μF 20000μF 20000μF 14400μF 14400μF 3000μF 2000μF ± 3000μF ± 2000μF ± 1300μF Note 1. 2. 3. 4. 5. 6. 7. 8. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) MIL-STD-217F Notice2 @Ta=25 ºC, Full load (Ground, Benign, controlled environment) Maximum value at nominal input voltage. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. The ON/OFF control pin voltage is referenced to -Input. Heat sink is optional and P/N: 7G-0020C-F. The FED30W series can meet EN55022 Class A with parallel an external capacitor to the input pins. Recommend: 24Vin : 4.7μF/50V X7R 1812 MLCC. 48Vin : 2.2μF/100V X7R 1812 MLCC. An external filter capacitor is required if the module has to meet EN61000-4-4,EN61000-4-5. The filter capacitor Power Mate suggest: 24Vin : Nippon chemi-con KY series, 330μF/50V, ESR 55mΩ. 48Vin : Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ FED30-48S05W Derating Curve 120 120 9. FED30-48S05W Derating Curve with Heat-Sink OUTPUT POWER (%) 100 80 60 40 20 0 -40 -20 0 20 40 60 OUTPUT POWER (%) 100 80 60 40 20 0 -40 -20 0 20 40 55 60 80 100 120 64 80 100 120 AMBIENT TEMPERATURE(℃ ) AMBIENT TEMPERATURE(℃ ) 95 FED30-48S05W EfficiencyVS InputInput voltage FED30-48S05W Efficiency VS Voltage FED30-48S05W Efficiency VS Output Load FED30-48S05W Efficiency VS Output Load 90 85 93 EFFICIENCY (%) 80 EFFICIENCY (%) 18 24 30 36 42 48 54 INPUT VOLTAGE (V) 60 66 72 75 91 75 70 65 60 55 89 87 85 50 10 20 30 40 50 60 % of FULL LOAD 70 80 90 100 Page 2 of 3 Issued Date：2008/07/11 Recommended Filter for EN55022 Class A Compliance 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: Single Output FED30-24S XX W FED30-48S XX W Dual Output FED30-24D XX W FED30-48D XX W C1 6.8μF/50V 1812 MLCC 2.2μF/100V 1812 MLCC C1 6.8μF/50V 1812 MLCC 2.2μF/100V 1812 MLCC C2 & C3 1000pF/2KV 1808 MLCC 1000pF/2KV 1808 MLCC C2 & C4 1000pF/2KV 1808 MLCC 1000pF/2KV 1808 MLCC PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE + INPUT - INPUT CTRL + OUTPUT - OUTPUT TRIM DUAL + INPUT - INPUT CTRL + OUTPUT COMMON - OUTPUT EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 6 5 6 4 RU 5 4 4 3 RD Recommended EN55022 Class A Filter Circuit Layout Page 3 of 3 Issued Date：2008/07/11