FKC03-24D15

FEATURES APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment • 3 WATTS REGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 500mA • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 82% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • FIXED SWITCHING FREQUENCY (300KHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • OVER CURRENT PROTECTION • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS SMD TYPE, M1 TYPE DESCRIPTION The FKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible with FKC05 series. FKC03 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. All specifications are typical at nominal input, full load and 25ºC otherwise noted T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load Line regulation Load regulation Cross regulation(Dual) Ripple and noise Temperature coefficient Transient response recovery time 25% load step change Over load protection Short circuit protection % of FL at nominal input LL to HL at Full Load No Load to Full Load Full load and nominal Vin INPUT SPECIFICATIONS 3 Watts, max. ± 1% Input voltage range 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Pi type 36VDC 50VDC 100VDC 20mAp-p 350mS, max. 0% Input filter Single Dual 12V input ± 0.2% Input surge voltage 24V input 100mS max ± 0.2% 48V input ± 1% Input reflected ripple current Nominal Vin and full load ± 5% See table ±0.02% / ºC, max. Start up time Nominal Vin and constant resistive load Standard M1 (Note 6) Power up Asymmetrical load 25% / 100% FL 20MHz bandwidth ENVIRONMENTAL SPECIFICATIONS -25ºC~+85ºC (with derating) -40ºC~+85ºC (non-derating) +100ºC -55ºC ~ +105ºC 20ºC/watt MIL-STD-810F MIL-STD-810F 5% to 95% RH 200μS Operating ambient temperature 180%, typ. Maximum case temperature Thermal impedance See table Thermal shock Vibration Continuous, automatics recovery Storage temperature range Nature convection GENERAL SPECIFICATIONS Efficiency Isolation voltage Input to Output Input(Output) to Case DIP SMD 1600VDC, min. 1600VDC, min. Relative humidity 1000VDC, min. 10 ohms, min. 300pF, max. 9 Isolation resistance Isolation capacitance Switching frequency Approvals and standard Case material Base material Potting material Dimensions Weight MTBF (Note 1) EMC CHARACTERISTICS EMI EN55022 EN61000-4-2 EN61000-4-3 Air Contact ± 8KV ± 6KV 10 V/m ± 2KV ± 1KV 10 Vr.m.s Class A Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A 300KHz, typ. ESD IEC60950-1, UL60950-1, EN60950-1 Radiated immunity Nickel-coated copper Fast transient (Note 7) EN61000-4-4 EN61000-4-5 Non-conductive black plastic Surge (Note 7) Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) 6 BELLCORE TR-NWT-000332 3.155 x 10 hrs 6 MIL-HDBK-217F 2.597 x 10 hrs VER:08 Conducted immunity EN61000-4-6 Page 1 of 3 Issued Date：2008/05/21 Model Number FKC03-12S33 FKC03-12S05 FKC03-12S12 FKC03-12S15 FKC03-12D05 FKC03-12D12 FKC03-12D15 FKC03-24S33 FKC03-24S05 FKC03-24S12 FKC03-24S15 FKC03-24D05 FKC03-24D12 FKC03-24D15 FKC03-48S33 FKC03-48S05 FKC03-48S12 FKC03-48S15 FKC03-48D05 FKC03-48D12 FKC03-48D15 Input Range 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC Output Voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output Current Min. load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA Input Current Eff (4) Capacitor(5) Output (4) No load Full load (%) Load max Full load Ripple & Noise (3) (2) 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 10mA 10mA 10mA 15mA 15mA 15mA 20mA 10mA 10mA 15mA 15mA 15mA 20mA 20mA 5mA 10mA 10mA 10mA 10mA 10mA 10mA 194mA 289mA 329mA 325mA 282mA 329mA 321mA 101mA 149mA 169mA 169mA 149mA 171mA 171mA 49mA 75mA 83mA 84mA 76mA 83mA 86mA 75 76 80 81 78 80 82 72 74 78 78 74 77 77 74 74 79 78 73 79 77 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF Note 1. 2. 3. 4. 5. 6. 7. BELLCORE TR-NWT-000332. Case 1：50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF /100V, ESR 48mΩ. OUTPUT POWER (%) FKC03-48S05 Derating Curve 120 100 80 60 40 20 0 -40 -25 -10 M1 Version M1 Version 5 20 35 50 65 82.4 95 110 80 AMBIENT TEMPERATURE(℃) VER:08 Page 2 of 3 Issued Date：2008/05/21 80 75 70 65 60 55 50 45 40 35 30 FKC03-48S05 Efficiency VS Output Load EFFICIENCY(%) 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) Suffix-SMD Pin size is 0.02(0.5) Dia or 0.01 x 0.02 (0.25 x 0.50) Rectangular Pin 0.18(4.6) 0.02(0.5) 0.100 (2.54) 1.00(25.4) 0.92(23.4) 0.44(11.2) 0.43(10.9) 0.700 (17.78) 0.200 (5.08) 23 22 1.25 (31.8) 2 3 24 20 1 5 9 12 0.80(20.3) 0.15 (3.8) BOTTOM VIEW 16 15 14 9 10 11 BOTTOM VIEW 13 0.15 (3.8) 0.40 (10.2) 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) 0.600(15.24) 0.80(20.3) DIP PIN CONNECTION PIN 2 3 9 10 11 SINGLE - INPUT - INPUT NC NC NC DUAL - INPUT - INPUT COMMON NC - OUTPUT PIN 23 22 16 15 14 SINGLE + INPUT + INPUT DUAL + INPUT + INPUT PIN 2 3 9 10 11 Others SMD PIN CONNECTION SINGLE - INPUT - INPUT NC NC NC NC DUAL - INPUT - INPUT PIN 23 22 SINGLE + INPUT + INPUT DUAL + INPUT + INPUT - OUTPUT COMMON NC NC + OUTPUT + OUTPUT 16 - OUTPUT COMMON COMMON NC 15 NC NC - OUTPUT 14 + OUTPUT + OUTPUT NC Others NC NC VER:08 Page 3 of 3 Issued Date：2008/05/21 0.25 (6.4) Pin Area 0.04 x 0.02 (1.0 x 0.5) 16 1.26 (32.0)