RCD15-24D12W

Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15 - 48 Series Name S 05 Input Voltage (VDC) Output Quantity Output Voltage (VDC) 24:9~36 48:18~75 110:36~160 S:Single 3P3:3.3 05:5 12:12 15:15 24:24 D:Dual 05:±5 12:±12 15:±15 24:±24 W - M3 A HC Input Range Operating Temp. Options Remote ON/OFF & Trim Options Assembly Options 4:1 :Standard -40°C~105°C With derating M3:M3 Version -55°C~105°C With derating :Negative logic : None A:Positive logic HC: 7G-0047C-F;H=0.22” (※NRND) B:Without Ctrl pin HC1: 7GA0117P01-F; H=0.3” C:Negative logic without HC2: 7GA0118P01-F; H=0.5” Trim pin HC3: 7GA0119P01-F; H=0.8” D:Without Ctrl & Trim pin E:Positive logic without ※NRND: Not recommended for new designs Trim pin P-DUKE Technology Co., Ltd. www.pduke.com 2022.09.20 Page 1 RCD15W Series TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ unless otherwise noted Output Current @Full Load Input Current @No Load VDC mA mA % μF 3.3 5 12 15 24 ±5 ±12 ±15 ±24 3.3 5 12 15 24 ±5 ±12 ±15 ±24 3.3 5 12 15 24 ±5 ±12 ±15 ±24 4500 3000 1300 1000 625 ±1500 ±625 ±500 ±315 4500 3000 1300 1000 625 ±1500 ±625 ±500 ±315 4500 3000 1300 1000 625 ±1500 ±625 ±500 ±315 12 12 12 12 12 12 12 12 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 88 90 89 90 91 87 90 90 91 88 90 89 90 91 87 90 90 90 88 89 89 89 90 86 89 89 90 5200 3600 600 500 200 ±1500 ±360 ±250 ±100 5200 3600 600 500 200 ±1500 ±360 ±250 ±100 5200 3600 600 500 200 ±1500 ±360 ±250 ±100 Model Number Input Range Output Voltage VDC RCD15-24S3P3W RCD15-24S05W RCD15-24S12W RCD15-24S15W RCD15-24S24W RCD15-24D05W RCD15-24D12W RCD15-24D15W RCD15-24D24W RCD15-48S3P3W RCD15-48S05W RCD15-48S12W RCD15-48S15W RCD15-48S24W RCD15-48D05W RCD15-48D12W RCD15-48D15W RCD15-48D24W RCD15-110S3P3W RCD15-110S05W RCD15-110S12W RCD15-110S15W RCD15-110S24W RCD15-110D05W RCD15-110D12W RCD15-110D15W RCD15-110D24W 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 36 ~ 160 36 ~ 160 36 ~ 160 36 ~ 160 36 ~ 160 36 ~ 160 36 ~ 160 36 ~ 160 36 ~ 160 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up voltage Shutdown voltage Start up time Constant resistive load Input surge voltage 1 second, max. Input filter Remote ON/OFF Referred to –Vin pin 24Vin(nom) 48Vin(nom) 110Vin(nom) 24Vin(nom) 48Vin(nom) 110Vin(nom) 24Vin(nom) 48Vin(nom) 110Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) 110Vin(nom) Positive logic DC-DC ON (Option) DC-DC OFF Negative logic DC-DC ON (Standard) DC-DC OFF Input current of Ctrl pin Remote off input current Efficiency Min. Typ. 9 18 36 24 48 110 7.5 15.5 32 -0.5 Maximum Capacitor Load Max. 36 75 160 9 18 38 8 8.8 16 17.5 34 35.5 30 40 30 40 50 100 185 Pi type Open or 3 ~ 15VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 15VDC +1.0 2.5 Unit VDC VDC VDC ms VDC mA mA P-DUKE Technology Co., Ltd. www.pduke.com 2022.09.20 Page 2 RCD15W OUTPUT SPECIFICATIONS Parameter Conditions Voltage accuracy Line regulation Low Line to High Line at Full Load Load regulation No Load to Full Load Min. Single Dual Single Dual Single Dual Dual 15Vout, 24Vout Others 10% Load to 90% Load Cross regulation Voltage adjustability Asymmetrical load 25%/100% FL Single output Ripple and noise Measured by 20MHz bandwidth With a 10μF/6.3V X7R MLCC With a 1μF/25V X7R MLCC With a 2.2μF/50V X7R MLCC With a 10μF/6.3V X7R MLCC for each output With a 1μF/25V X7R MLCC for each output With a 2.2μF/50V X7R MLCC for each output Temperature coefficient Transient response recovery time Over voltage protection Over load protection Short circuit protection Single 3.3Vout, 5Vout 12Vout, 15Vout 24Vout Dual 5Vout 12Vout, 15Vout 24Vout % of Iout rated Isolation resistance Isolation capacitance Switching frequency 500VDC Safety approvals IEC/ EN/ UL62368-1 Standard approvals EN50155 EN45545-2 % % % % mVp-p 75 100 125 +0.02 3.7 5.6 13.5 18.3 29.1 5.4 7.0 19.6 22.0 32.5 %/℃ μs VDC 170 % Continuous, automatics recovery Conditions Min. Input to Output Input (Output) to Case 3.3Vout, 5Vout Others MIL-HDBK-217F, Full load % 250 3.3Vout 5Vout 12Vout 15Vout 24Vout 1 minute Unit +1.0 +0.2 +0.5 +0.2 +1.0 +0.1 +0.8 +5.0 +20 +10 75 100 125 -0.02 Isolation voltage Max. -1.0 -0.2 -0.5 -0.2 -1.0 -0.1 -0.8 -5.0 -10 -10 25% load step change GENERAL SPECIFICATIONS Parameter Case material Base material Potting material Weight MTBF Typ. Series Typ. 3000 1600 1 220 270 Max. Unit VDC 245 300 GΩ 2000 pF 270 kHz 330 UL:E193009 CB:UL(Demko) copper FR4 PCB Silicone (UL94 V-0) 16.5g (0.58oz) 1.672 x 106 hrs P-DUKE Technology Co., Ltd. www.pduke.com 2022.09.20 Page 3 RCD15W ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature Standard type M3 version RCD15-D05W The others Maximum case temperature Storage temperature range Thermal impedance Natural convection Conditions Min. With derating With derating Meet the railway OT4 (70℃) temperature requirement as power derating to 12W output power Meet the railway OT4 (70℃) temperature Without Heat-sink With Heat-sink HC HC1 HC2 HC3 Thermal shock Shock Vibration Relative humidity Max. Unit -40 -55 +105 +105 ℃ -55 105 +125 ℃ ℃ 17.0 15.3 12.9 10.9 9.3 ℃/W MIL-STD-810F EN61373, MIL-STD-810F EN61373, MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter Conditions EMI EN55032, EN50121-3-2 EMS ESD Radiated immunity Fast transient EN55035, EN50121-3-2 EN61000-4-2 EN61000-4-3 EN61000-4-4 Surge Typ. Series Class A Class B Air ± 8kV and Contact ± 6kV 20 V/m ±2kV RCD15-24W With an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220μF/100V) and a TVS (SMDJ58A, 58V, 3000Watt peak pulse power) in parallel. RCD15-48W With an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220μF/100V). RCD15-110W With an aluminum electrolytic capacitor (Nippon chemi-con KXJ series, 150μF/200V) and a TVS (SMBJ300A, 300V, 600Watt peak pulse power) in parallel. ±2kV EN61000-4-5 Level Without external components With external components. RCD15-24W With an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220μF/100V) and a TVS (SMDJ58A, 58V, 3000Watt peak pulse power) in parallel. RCD15-48W With an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220μF/100V). Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A With an aluminum electrolytic capacitor (Nippon chemi-con KXJ series, 150μF/200V) and a TVS (SMBJ300A, 300V, 600Watt peak pulse power) in parallel. Conducted immunity EN61000-4-6 10 Vr.m.s Power frequency magnetic field EN61000-4-8 100A/m continuous; 1000A/m 1 second CAUTION: This power module is not internally fused. An input line fuse must always be used. RCD15-110W Perf. Criteria A Perf. Criteria A P-DUKE Technology Co., Ltd. www.pduke.com 2022.09.20 Page 4 RCD15W Series CHARACTERISTIC CURVE RCD15-24□□□W Derating Curve RCD15-48□□□W Derating Curve RCD15-110□□□W Derating Curve RCD15-24S05W Efficiency vs. Output Load RCD15-24S05W Derating Curve With Heat-sink *Except for RCD15-□□□D05W RCD15-24S05W Efficiency vs. Input Voltage FUSE CONSIDERATION This power module is not internally fused. An input line fuse must always be used. This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of sophisticated power architecture. To maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The input line fuse suggest as below： Modules RCD15-24S□□W、RCD15-24D□□W RCD15-48S□□W、RCD15-48D□□W RCD15-110S□□W、RCD15-110D□□W Fuse Rating (A) 3.15 1.6 1.0 Fuse Type Slow-Blow Slow-Blow Slow-Blow The table based on the information provided in this data sheet on inrush energy and maximum DC input current at low Vin.. P-DUKE Technology Co., Ltd. www.pduke.com 2022.09.20 Page 5 RCD15W Series MECHANICAL DRAWING PIN CONNECTION PIN SINGLE 1 +Vin 2 -Vin 3 Ctrl 4 +Vout 5 Trim 6 -Vout DUAL +Vin -Vin Ctrl +Vout Common -Vout 1. All dimensions in inch [mm] Tolerance :x.xx±0.02 [x.x±0.5] x.xxx±0.010 [x.xx±0.25] 2. Pin dimension tolerance ±0.004[0.10] RECOMMENDED PAD LAYOUT Standard -HC -HC1、-HC2、-HC3 All dimensions in inch[mm] Pad size(lead free recommended) Through hole 1.2.3.4.5.6: Φ0.051[1.30] Top view pad 1.2.3.4.5.6: Φ0.064[1.63] Bottom view pad 1.2.3.4.5.6: Φ0.102[2.60] P-DUKE Technology Co., Ltd. www.pduke.com 2022.09.20 Page 6 RCD15W Series THERMAL CONSIDERATIONS The power module operates in a variety of thermal environments. However, sufficient cooling should be provided to help ensure reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding environment. Proper cooling can be verified by measuring the point as the figure below. The temperature at this location should not exceed “Maximum case temperature”. When operating, adequate cooling must be provided to maintain the test point temperature at or below “Maximum case temperature”. You can limit this temperature to a lower value for extremely high reliability.  Thermal test condition with vertical direction by natural convection (20LFM). TOP VIEW HEAT-SINK TYPE OPTIONS RCD15-□□□□□W-HC 7G-0047C-F RCD15-□□□□□W-HC1 7GA0117P01-F RCD15-□□□□□W-HC2 7GA0118P01-F RCD15-□□□□□W-HC3 7GA0119P01-F 1. All dimensions in inch [mm] 2. Tolerance :x.xx±0.02 [x.x±0.5] x.xxx±0.010 [x.xx±0.25] P-DUKE Technology Co., Ltd. www.pduke.com 2022.09.20 Page 7 RCD15W Series OUTPUT VOLTAGE ADJUSTMENT Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the Trim pin and either the +Output or -Output pins. With an external resistor between the Trim and -Output pin, the output voltage set point increases. With an external resistor between the Trim and +Output pin, the output voltage set point decreases. The external Trim resistor needs to be at least 1/16W of rated power.  Trim Up Equation  Trim Constants   GL RU    H     Vo,up  L  K    Trim Down Equation     Vo,down  L  G  H RD      Vo  Vo,down   Module G H K L RCD15-S3P3W RCD15-S05W RCD15-S12W RCD15-S15W RCD15-S24W 5110 5110 10000 10000 56000 2050 2050 5110 5110 13000 0.8 2.5 9.5 12.5 21.5 2.5 2.5 2.5 2.5 2.5  EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. Trim-up □□S3P3W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 3.333 3.366 3.399 3.432 3.465 3.498 3.531 3.564 3.597 3.630 RU (kΩ) 385.071 191.511 126.990 94.730 75.374 62.470 53.253 46.340 40.963 36.662 □□S05W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 5.050 5.100 5.150 5.200 5.250 5.300 5.350 5.400 5.450 5.500 RU (kΩ) 253.450 125.700 83.117 61.825 49.050 40.533 34.450 29.888 26.339 23.500 □□S12W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 12.120 12.240 12.360 12.480 12.600 12.720 12.840 12.960 13.080 13.200 RU (kΩ) 203.223 99.057 64.334 46.973 36.557 29.612 24.652 20.932 18.038 15.723 □□S15W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 15.150 15.300 15.450 15.600 15.750 15.900 16.050 16.200 16.350 16.500 RU (kΩ) 161.557 78.223 50.446 36.557 28.223 22.668 18.700 15.723 13.409 11.557 △V (%) 11 12 13 14 15 16 17 18 19 20 Vout (V) 16.650 16.800 16.950 17.100 17.250 17.400 17.550 17.700 17.850 18.000 RU (kΩ) 10.042 8.779 7.711 6.795 6.001 5.307 4.694 4.149 3.662 3.223 □□S24W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 24.240 24.480 24.720 24.960 25.200 25.440 25.680 25.920 26.160 26.400 RU (kΩ) 570.333 278.667 181.444 132.833 103.667 84.222 70.333 59.917 51.815 45.333 △V (%) 11 12 13 14 15 16 17 18 19 20 Vout (V) 26.640 26.880 27.120 27.360 27.600 27.840 28.080 28.320 28.560 28.800 RU (kΩ) 40.030 35.611 31.872 28.667 25.889 23.458 21.314 19.407 17.702 16.167 P-DUKE Technology Co., Ltd. www.pduke.com 2022.09.20 Page 8 RCD15W Series OUTPUT VOLTAGE ADJUSTMENT(CONTINUED) Trim-down □□S3P3W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 3.267 3.234 3.201 3.168 3.135 3.102 3.069 3.036 3.003 2.970 RD (kΩ) 116.719 54.779 34.133 23.810 17.616 13.486 10.537 8.325 6.604 5.228 □□S05W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 4.950 4.900 4.850 4.800 4.750 4.700 4.650 4.600 4.550 4.500 RD (kΩ) 248.340 120.590 78.007 56.715 43.940 35.423 29.340 24.778 21.229 18.390 □□S12W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 11.880 11.760 11.640 11.520 11.400 11.280 11.160 11.040 10.920 10.800 RD (kΩ) 776.557 380.723 248.779 182.807 143.223 116.834 97.985 83.848 72.853 64.057 □□S15W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 14.850 14.700 14.550 14.400 14.250 14.100 13.950 13.800 13.650 13.500 RD (kΩ) 818.223 401.557 262.668 193.223 151.557 123.779 103.938 89.057 77.483 68.223 □□S24W △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 23.760 23.520 23.280 23.040 22.800 22.560 22.320 22.080 21.840 21.600 RD (kΩ) 4947.667 2439.333 1603.222 1185.167 934.333 767.111 647.667 558.083 488.407 432.667 P-DUKE Technology Co., Ltd. Tel Fax Email Web Add +886-4-2359-0668 +886-4-2359-1337 sales@pduke.com www.pduke.com No. 36, 22nd Rd., Taichung Industrial Park, Taichung, Taiwan, R.O.C. 2022.09.20 Page 9