B120L

B120L thru B140L LO VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE - 20 TO 40 VOLTS CURRENT - 1.0 AMPERES SMA/DO-214AC .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .030(0.76) .060(1.52) .004(.102) .008(.203) .188(4.80) .208(5.28) Dimensions in inches and (millimeters) FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mount applications Low profile package Built-in strain relief Metal to silicon rectifier, majority carrier conduction Low power loss, high efficiency Easy pick and place High curren capability, low VF High surge capacity For use in low voltage gigh frequency inverters, Free wheeling, and protection applications High temperature soldering guaranteed High temperature soldering 260oC/10 seconds at terminsls Pb free product at available 99% Sn above meet RoHs Environment substance directive request MECHANICAL DATA Case JEDEC DO-214AC molded plastic Terminals Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Color band denotes cathode Standard Package 12mm tape (EIA STD EIA-481) Weight 0.002 ounce, 0.064gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Resistive or inductive load SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL (see Figure 1) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0A (Note 1) Maximum DC Reverse Current (NOTE 1) TA=25 C (Note 1) at Rated DC Blocking Voltage TA=1000C Maximum Thermal Resistance (NOTE 2) Operating Junction Capacitance Range Storage and Operating Temperature Range R R 0 B120L 20 14 20 B130L 30 21 30 1.0 B140L 40 28 40 UNITS Volts Volts Volts Amps VRRM VRMS VDC I(AV) IFSM VF IR JL JA 30 0.38 0.5 20 28 88 0.4 Amps Volts mA 0 C/W 0 TJ TSTG -50 to +150 -50 to +150 C C 0 NOTES 1. Pulse test with pw=300 sec, 1% duty cycle 2. Measured on P .C.B WITH 5.0mm2 (0.13mm thick ) copper pad areas www.paceleader.tw 1 B120L thru B140L LO VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER RATING AND CHARACTERISTICS CURVES B120L THRU B140L www.paceleader.tw 2