FM4007

FM4001 thru FM4007 SURFACE MOUNT STANDARD RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES SMA/DO-214AC .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .030(0.76) .060(1.52) .004(.102) .008(.203) .188(4.80) .208(5.28) Dimensions in inches and (millimeters) FEATURES For surface mount applications Glass passivated junction Low profile package Built-in strain relief Easy pick and place Low forward voltage drop Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature soldering 250oC/10 seconds at terminsls MECHANICAL DATA Case JEDEC DO-214AC molded plastic Terminals Solder plated, solderable per MIL-STD-202, Method 208 Polarity Color band denotes cathode end Standard Package 12mm tape (EIA STD EIA-481) Weight 0.002 ounce, 0.064gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL FM4001 FM4002 FM4003 FM4004 FM4005 FM4006 FM4007 UNITS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL =1000C Peak Forward Surge Current 8.3mm Single Half wine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current TA=250C at Rated DC Blocking Voltage TA=1250C Typical Junction Capacitance (NOTE 1) Maximum Thermal Resistance (NOTE 2) VRRM VRMS VDC I(AV) IFSM VF IR CJ R R JA JL 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30 1.1 5 50 12 75 30 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amps Amps Volts A pF 0 C/W Operating and Storage Temperature Range TJ TSTG -55 to +150 0 C NOTES 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts 2. P .C.B. mounted on 0.2x0.2 (5.0x5.0mm)copper pad areas www.paceleader.tw 1 FM4001 thru FM4007 SURFACE MOUNT STANDARD RECOVERY RECTIFIER RATING AND CHARACTERISTICS CURVES FM4001 THRU FM4007 Fig. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) 2.0 Fig. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 25 8.3ms Single Half Sine-Wave JEDEC Method AVERAGE FORWARD CURRENT, (A) 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INOUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS 20 15 10 5 0 25 50 75 100 125 150 175 0 LEAD TEMPERATURE, C 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) 100 10 0 TJ=125C INSTANTANEOUS REVERSE CURRENT MICROAMPERES Fig. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.4 1 0.1 0.01 0.001 0 20 40 60 80 100 120 140 TJ=75C 0 TJ=25C 0 0.6 0.8 1 1.2 1.4 1.6 1.8 2 PERCENT OF PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAG (V) E, Fig. 5 - TRANSIENT THERMAL IMPEDANCE THERMAL IMPEDANCE ( 0C/W ) 1,000 500 200 100 50 20 10 5 2 1 0.01 Fig. 6 - TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE-pF Units Mounted on 2 20in2(5. 4mm)+0 .5mil inches (0.013mm) Thick Copper Land Areas 50 20 10 5 2 1 0.01 0 TJ=25C f=1.0MHz Vsig=50m Vp-p 0.1 1 10 100 0.1 1 10 100 HEATING TIME (SEC) REVERSE VOLTAGE(V) www.paceleader.tw 2