FM5817

FM5817 thru FM5819 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE - 20 TO 40 VOLTS CURRENT - 1.0 AMPERES SMA/DO-214AC .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .030(0.76) .060(1.52) .004(.102) .008(.203) .188(4.80) .208(5.28) Dimensions in inches and (millimeters) FEATURES For surface mount applications Low profile package Built-in strain relief Easy pick and place Low forward voltage drop Metal to silicon rectifier, majority carrier conduction Low power loss, high efficiency High current and surge capability Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature soldering 250oC/10 seconds at terminsls MECHANICAL DATA Case JEDEC DO-214AC molded plastic Terminals Solder plated, solderable per MIL-STD-202, Method 208 Polarity Color band denotes cathode end Standard Package 12mm tape (EIA STD EIA-481) Weight 0.002 ounce, 0.064gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL (Figure 1) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current (NOTE 1) TA=25 C at Rated DC Blocking Voltage TA=1000C Maximum Thermal Resistance (NOTE 2) Typical Junction Capacitance (NOTE 3) Storage and Operating Temperature Range R R 0 FM5817 20 14 20 FM5818 30 21 30 1.0 40 FM5819 40 28 40 UNITS Volts Volts Volts Amps Amps VRRM VRMS VDC I(AV) IFSM VF IR JA JL 0.45 0.5 10 88 28 110 0.5 Volts mA 0 C/W pF 0 CJ TJ TSTG -55 to +150 C NOTES 1. Pulse test with 300 S PULSE WIDTH, 1% duty cycle 2. P .C.B. mounted on 0.2x0.2 (5.0x5.0mm)copper pad areas 3. Measured at 1.0MHz and applied reverse voltage of 4.0 volts www.paceleader.tw 1 FM5817 thru FM5819 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER RATING AND CHARACTERISTICS CURVES FM5817 THRU FM5819 AVERAGE FORWARD CURRENT AMPERES Fig. 1 - FORWARD CURRENT DERATING CURVE 1.0 .75 .50 .25 0 0 25 50 75 100 125 150 175 SINGLE PHASE HALF WAVE 60 Hz RESISTIVE OR INDUCTIVE LOAD .375" (9.5mm) LEAD LENGTH Fig. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES 20 10 LEAD TEMPERATURE, 0C Fig. 3A - TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES 100 INSTANTANEOUS REVERSE CURRENT, MILLAMPERES 0 TJ=125C 5 FM 817 M5 ~F 8 19 1.0 FM5817 FM5818 FM5819 Pulse Width-300 s 1% DUTY CYCLE TJ=250C 0.1 .1 .3 .5 .7 .9 1.1 1.3 1.5 1.7 1.9 2.1 INSTANTANEOUS FORWARD VOLT AGE, (V) Fig. 3B - TYPICAL REVERSE CHARACTERISTICS 100 FM5817 FM5819 10 10 1.0 TJ=750C 1.0 0 TJ=150C 0 TJ=125C .10 .10 TJ=250C 0.1 0.1 TJ=250C .001 0 20 40 60 80 100 120 140 .001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Fig. 4 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 400 200 TJ=250C Fig. 5 - MAXIMUM NON-REPETITIVE SURGE CURRENT 50 100 80 60 40 20 10 .1 FM5817 FM5818 FM5819 PEAK FORWARD SURGE CURRENT AMPERES 40 30 20 10 0 8.3ms Single Half Sine-Wave JEDEC Method 1.0 10 100 1 10 100 NUMBER OF CYCLES AT 60 Hz REVERSE VOLTAGE, VOLTS www.paceleader.tw 2