FSM102

FSM101 thru FSM107 SURFACE MOUNT FAST RECOVERY GLASS PASSIVATED RECTIFIERS DO-213AB / MELF SOLDERABLE ENDS D1= 0.105(2.67) 0.095(2.41) CATHODE BAND D2 0.022(0.559) 0.016(0.406) 0.205(5.20) 0.185(4.70) D2=D1 +0 -0.008(0.20) Dimension in inches (millimeters ) FEATURES Ldeal for surface mounted applications Easy pick and place Low leakage current Glass passivated chips Fast switching Metallurgically bonded construction High temperature soldering guaranteed 250oC/10 seconds/.375 , (9.5mm) lead lengths MECHANICAL DATA Molded plastic use UL94V-0 recoqnized flame retardant epoxy Terminals Plated terminals, solderable per MIL-STD-202, Method 208 Polarity Red Color band on body denotes cathode Mounting position Any Weight 0.12gram Case MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temp. unless otherwise specified Single phase, half sine wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL FSM101 FSM102 FSM103 FSM104 FSM105 FSM106 FSM107 Maximum Current Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TT=600C Peak Forward Surge Current Single Sine-Wave on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage Drop at 1.0A DC Maximum DC Reverse Current TA=250C at Rated DC Blocking Voltage TA=1250C Maximum Reverse Recovery Time Typical Junction Capacitance Operating Junction Temperature Range Storage Temperature Range VRRM VRMS VDC I(AV) IFSM VF IR TRR CJ TJ TSTG 150 15 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30 1.3 5.0 100 250 500 600 420 600 800 560 800 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts A nS pF 0 -65 to +150 -65 to +150 C C 0 NOTES 1. Reverse Recovery Test Conditions IF=0.5A, I R=1.0A, I RR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C www.paceleader.tw 1 FSM101 thru FSM107 SURFACE MOUNT FAST RECOVERY GLASS PASSIVATED RECTIFIERS RATING AND CHARACTERISTICS CURVES FSM101 THRU FSM107 www.paceleader.tw 2