KMB18F

KMB12F t hru KMB110F Schottky Surface Mount Flat Bridge Rectifier VOLTAGE - 20 TO 100 VOLTS CURRENT - 1.0 AMPERES Major Ratings and Characteristics 1.0 A IF(AV) 20 V to 100 V VRRM 30 A IFSM 0.50 V, 0.55V,0.70 V, 0.85V VF 125 °C Tj max. FEATURES ● ● ● ● ● ● ● ● Low profile package Ideal for automated placement Ultrafast reverse recovery time Low power losses, high efficiency Low forward voltage drop High surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC MECHANICAL DATA ● ● ● Case: MBF molded plastic body over Schottky barrier chips Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Polarity symbols marked on body MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) Symbol KMB12F KMB14F KMB16F KMB18F KMB110F UNIT Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.2×0.2"(5.0×5.0mm)copper pad area Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Maximum instantaneous forwad voltage at 1.0A Maximum DC reverse current TA = 25 ℃ at Rated DC blocking voltage TA = 100℃ Typical Junction Capacitance at 4.0V,1.0MHz Typical Thermal resistance (Note1) Operating junction temperature range Storage temperature range VRRM VRMS VDC IF(AV) IFSM VF IR CJ RθJA RθJL TJ TSTG 20 14 20 40 28 40 60 42 60 1.0 30 80 56 80 100 70 100 V V V A A 0.50 0.55 0.70 0.5 20 0.85 V mA 250 85 20 –55 to +125 – 55 to +150 125 pF ℃/ W ℃ ℃ Note：1.Thermal resistance from junction to ambient and from junction to lead P.C.B.mounted on 0.2×0.2"(5.0×5.0mm)copper pad areas. www.paceleader.tw 1 KMB12F t hru KMB110F Schottky Surface Mount Flat Bridge Rectifier VOLTAGE - 20 TO 100 VOLTS CURRENT - 1.0 AMPERES Characteristic Curves (TA=25 ℃ unless otherwise noted) www.paceleader.tw 2