MB105 F t hru M B110F
Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES
Major Ratings and Characteristics IF(AV) 1.0A VRRM 50-1000V IFSM 35 A IR 5.0 μA VF 1.0V Tj max. 150 °C FEATURES
● ● ● ● ● ● ●
●
Low profile space Ideal for automated placement Glass passivated chip junction Low forward voltage drop Low leakage current High forward surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC
MECHANICAL DATA
●
●
●
Case: MBF Molded plastic over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Polarity symbols marked on body
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
(TA = 25 °C unless otherwise noted)
Symbol MB105F M B11F M B12F M B14F M B16F M B18F MB110F UNIT
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current at TA=30℃ Peak forward surge current 8.3 ms single half sinewave superimposed on rated load(JEDEC Method) Maximum instantaneous forwad voltage drop per leg at 1.0A Maximum DC reverse current at TA = 25 ℃ rated DC blocking voltage per leg TA = 125℃ Typical junction capacitance per leg at 4.0 V ,1MHz Thermal resistance per leg (NOTE 1)
VRRM VRMS VDC IF(AV) IFSM VF IR CJ RθJA RθJL
50 35 50
100 70 100
200 140 200
400 280 400 1.0 35 1.1 5.0 100 13 70 20
600 420 600
800 560 800
1000 700 1000
V V V A A V μA pF
℃/ W ℃
Operating junction and storage temperature range TJ, TSTG
NOTE1: Units mounted on P.C.B. with 0.05×0.05″(1.3×1.3mm) pads
–55 to +150
www.paceleader.tw
1
MB105 F t hru M B110F
Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES
Characteristic Curves (TA=25 ℃ unless otherwise noted)
www.paceleader.tw
2
