S3BC

S3AC thru S3MC SURFACE MOUNT STANDARD RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 3.0 AMPERES SMC/DO-214AB .108(2.75) .128(3.25) .220(5.59) .245(6.22) .260(6.60) .280(7.11) .006(.152) .012(.305) .079(2.00) .103(2.62) .002(.051) .008(.203) .305(7.75) .320(8.13) .030(0.76) .050(1.27) Dimensions in inches and (millimeters) FEATURES For surface mount applications Glass passivated junction Low profile package Built-in strain relief Easy pick and place Low forward voltage drop Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature soldering 260oC/10 seconds at terminsls MECHANICAL DATA Case JEDEC DO-214AB molded plastic Terminals Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Indicated by cathode band Standard Package 12mm tape (EIA STD EIA-481) Weight 0.007 ounce, 0.21gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL S3AC Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL =750C Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 3.0A Maximum DC Reverse Current (NOTE 1)TA=25 C at Rated DC Blocking Voltage TA=1250C Typical Reverse Recovery Time (NOTE 1) Maximum Thermal Resistance (NOTE 2) Typical Junction Capacitance (NOTE 3) Operating and Storage Temperature Range 0 S3BC 100 70 100 S3DC 200 140 200 S3GC 400 280 400 3.0 100 1.2 5 250 2.5 13 47 53 S3JC 600 420 600 S3KC 800 560 800 S3MC 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts A nS 0 VRRM VRMS VDC I(AV) IFSM VF IR TRR R R JA JL 50 35 50 C/W pF 0 CJ TJ TSTG -55 to +150 C NOTES 1. Reverse Recovery Test Conditions IF=0.5A, IR=1.0A, IRR=0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts 3. 8.0mm2 (0.13mm thick) land areas. www.paceleader.tw 1 S3AC thru S3MC SURFACE MOUNT STANDARD RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES S3AC THRU S3MC Fig. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 3.0 2.5 2.0 1.5 1.0 0.5 0 50 60 70 80 90 100 110 120 130 140 150 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INOUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS Fig. 2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) 200 100 50 10 1 8.3ms Single Half Sine Wave JEDEC Method LEAD TEMPERATURE, 0C 5 10 50 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 Fig. 4 - TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE-pF INSTANTANEOUS FORWARD CURRENT, (A) 30 50 10 0 TJ=25C 3.0 1.0 0 TJ=25C Pulse Width-300 s 2% DUTY CYCLE 10 5 1 5 10 50 100 0.3 REVERSE VOLTAGE(V) 0.1 .03 .01 0.6 Fig. 5 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) 0.7 0.8 0.9 1.0 1.1 1.2 1.3 100 0 TJ=125C INSTANTANEOUS FORWARD VOLT AGE, (V) 10 1.0 0 TJ=25C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE www.paceleader.tw 2