SF1001FCT thru SF1007FCT
SUPERFAST RECOVERY RECTIFIER
VOLTAGE - 50 TO 600 VOLTS CURRENT - 10 AMPERES
ITO-220AB
FEATURES
Low forward voltage drop High Current Capability High reliability High surge Current Capability Good for switching mode application High temperature soldering 260oC/10seconds at terminals Pb free product are available 99% Sn above can meet RoHS environment substance directive request
MECHANICAL DATA
Case ITO220AB Molded plastic Epoxy UL 94V-0 rate flame retardant Lead Lead solderable per MIL-STD-202, Method 208 guranteed Polarity As Marked Mounting Position Any Weight 2.24gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20%
PARAMETER Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length at TC=1000C Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instandeous Forward Voltage at 5.0A Maximum DC Reverse Current TA=25 C at Rated DC Blocking Voltage TA=1000C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range TJ,TSTG NOTES 1. Reverse Recovery Time test condition IF=0.5A , IR=1.0A , IRR=0.25A 2. Measured at 1.0MHz and applied reverse Voltage of 4.0V D.C 35 50
0
SF1001FCT SF1002FCT SF1003FCT SF1004FCT SF1005FCT SF1006FCT SF1007FCT
UNITS
Volts Volts Volts Amps
50 35 50
100 70 100
150 105 150
200 140 200 10
300 210 300
400 320 400
600 420 600
150 0.95 10 500 50 1.3 1.7
Amps Volts A nS pF
0
-55 to +150
C
www.paceleader.com.tw
1
SF1001FCT thru SF1007FCT
SUPERFAST RECOVERY RECTIFIER
RATINGS AND CHARACTERISTIC CURVES SF1001FCT THRU SF1007FCT
www.paceleader.com.tw
2
很抱歉,暂时无法提供与“SF1007FCT”相匹配的价格&库存,您可以联系我们找货
免费人工找货