SM204

SM201 thru SM207 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIERS DO-213AB / MELF SOLDERABLE ENDS D1= 0.105(2.67) 0.095(2.41) CATHODE BAN D D2 0.022(0.559) 0.016(0.406) 0.205(5.20) 0.185(4.70) D2=D1 +0 -0.008(0.20) Dimension in inches (millimeters ) FEATURES Ldeal for surface mounted applications Easy pick and place Low leakage current Glass passivated chips Metallurgically bonded construction High temperature soldering guaranteed 250oC/10 seconds/.375 , (9.5mm) lead lengths MECHANICAL DATA Molded plastic use UL94V-0 recoqnized flame retardant epoxy Terminals Plated terminals, solderable per MIL-STD-202, Method 208 Polarity Red Color band on body denotes cathode Mounting position Any Weight 0.12grams Case MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half sine wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL SM201 SM202 SM203 SM204 SM205 SM206 SM207 Maximum Current Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375 , (9.5mm) lead length @TT=600C Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A Maximum DC Reverse Current @TA=25 C at Rated DC Blocking Voltage @TA=1250C Maximum Full Load Reverse Current, Full Cycle Average 0.375 (9.5mm) lead length @TA=750C Typical Junction Capacitance (Note 1) Typical Thermal Rseistance R Operating Temperature TJ Storage Temperature Range TSTG JA 0 UNITS Volts Volts Volts Amps VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 400 280 400 2.0 600 420 600 800 560 800 1000 700 1000 IFSM VF IR IR(AV) CJ R JA 55 1.1 5.0 100 Amps Volts A 30 30.0 50 -65 to +150 -65 to +150 0 A pF C/W 0 (Note 2) TJ TSTG C C 0 NOTES 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C 2. Thermal Resestance From Junction to Ambient 0.375 (9.5mm) lead length www.paceleader.com.tw 1 SM201 thru SM207 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIERS RATINGS AND CHARACTERISTIC CURVES SM201 THRU SM207 FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIER CURRENT FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 AVERAGE FORWARD RECTIFIED CURRENT AMPERES 90 2.0 80 70 PEAK FORWARD SURGE CURENT (A) 50 75 1 00 1 25 1 50 1 75 60 50 40 30 1 .0 20 0 25 AMBIENT TEMPERATURE (oC) 10 1 10 100 NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 100 FIG. 4 - TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD CURRENT. (A) 1.0 JUNCTION CAPACITANCE.(pF) 10 0.1 1 1 10 100 REVERSE VOLTAGE. (V) .01 .4 .6 .8 1 .0 1 .2 1 .4 1 .6 FORWARD VOLT AGE.(V) www.paceleader.com.tw 2