AN607P

ICs for Video Camera AN607P Wide bandwidth video amplifier IC (inverting amplifier) s Overview The AN607P is an amplifier IC with a 20 dB gain, a phase inverted output and a wide bandwidth (10 MHz). It is best suited to video amplifier and sense amplifier. 7.0±0.3 5.0±0.3 Unit: mm 7.0±0.3 45° s Features • Wide bandwidth (10 MHz) • 20 dB, phase inverting amplifier • 4-pin SIP plastic package 12.3±0.25 s Applications • Video amplifier, sense amplifier 1.27 9° 9° 12 3 4 0.416±0.1 0.225 –0.1 +0.25 9° SSIP004-P-0000A s Equivalent Circuit 2 Q7 1 3 Q1 Q2 Q3Q4 Q5 Q6 4 s Pin Descriptions Pin No. 1 2 3 4 Output Supply voltage Input GND Description 1.2 2.0±0.3 1 AN607P s Absolute Maximum Ratings at Ta = 25°C Parameter Supply voltage Circuit voltage Total consumption current Circuit current Symbol V2-4 V3-4 I2 I3 I1 Total power dissipation Operating ambient temperature Storage temperature PTOT Topr Tstg Rating 14.4 V2-4 to −1 11 +1 to − 0.5 0 to −5 160 −20 to +70 −40 to +125 ICs for Video Camera Unit V V mA mA mW °C °C Note) Do not apply current and voltage to the pins not described. The mark '+' means the current flowing into the IC and the mark '−' means the current flowing out of the IC. s Electrical Characteristics Parameter Circuit current Video signal output pin voltage Video signal input pin voltage Maximum output voltage Output voltage 1 Output voltage 2 Frequency characteristics Frequency characteristics Total harmonics distortion ratio Symbol I2 V1-4 V3-4 VOM VO(1) VO(2) ∆VO(f1) ∆VO(f2) THD VCC = 12 V VCC = 12 V VCC = 12 V f = 10 kHz, RL = 1.5 kΩ f = 10 kHz, VI = 0.1 V[p-p] VI = 0.2 V[p-p] VI = 0.1 V[p-p], f = 1 MHz to 5 MHz VI = 0.1 V[p-p], f = 1 MHz to 10 MHz f = 10 kHz Conditions Min 5.0 5.0 1.9 2 0.8 1.5 −1 −1 1.1 2.2 +1 +2 1 Typ Max 9.0 8.0 3.5 Unit mA V V V[p-p] V[p-p] V[p-p] dB dB % s Basic Circuit 3 4 2 1 0.01 µF Input +12 V Output 2