AN6914

AN1393 (AN6914), AN1393S (AN6914S) Dual Comparators AN1393 (AN6914) Unit:mm 0.5±0.1 1.2±0.25 0.51min. 3.8±0.25 (3.45) +0.1 s Overview The AN1393 (AN6914) and the AN1393S (AN6914S) are dual (voltage) comparators with wide range of operating supply valtage. 1 9.4±0.3 2 3 4 6.3±0.3 8 7 5 s Features • Wide range of operating voltages Single supply:2 to 36V Dual supply:±1 to ± 18V • Low circuit current:0.6mA typ. • Wide range of common-mode input voltages :0V to VCC–1.5V (single supply) • Open collector output 3—15˚ 7.62±0.25 0.15 – 0.05 8-pin DIL Plastic Package (DIP008-P-0300B) AN1393S (AN6914S) 0.4±0.25 Unit:mm 0.6±0.3 1 2 3 4 8 7 6 5 5.0±0.3 0.15 0.65 1.5±0.2 0.1±0.1 1.27 0.3 4.2±0.3 6.5±0.3 8-pin PANAFLAT Plastic Package (SOP008-P-0225A) s Block Diagram VCC 8 VO2 7 VIN2– 6 – VIN2+ 5 + Ch.2 Ch.1 – 1 2 + 3 4 VO1 VIN1– VIN1+ GND 2.54 6 s Pin Descriptions Pin No. 1 2 3 4 5 6 7 8 Pin name Ch.1 output Ch.1 inverting input Ch.1 non inverting input GND Ch.2 non inverting input Ch.2 inverting input Ch.2 output VCC s Absolute Maximum Ratings (Ta=25˚C) Parameter Supply voltage Voltage Common-mode input voltage Differential input voltage Output applied voltage Power dissipation AN1393 (AN6914) AN1393S(AN6914S) Operating ambient temperature Storage temperature AN1393(AN6914) AN1393S(AN6914S) Symbol VCC VICM *1 VID *2 V1, V7 PD Topr Tstg Rating 36 – 0.3 to 36 36 24 500 360 – 30 to +85 – 55 to +150 – 55 to +125 Unit V V V V mW ˚C ˚C *1 The common mode input voltage is a voltage applied to the non-inverting input pin and inverting input pin simultaneously. *2 Differential input is equivalent to the potential difference between the non-inverting input pin and inverting input pin. s Recommended Operating Range (Ta=25˚C) Parameter Operating supply voltage range Symbol VCC Range Single power supply 2V to 36V Double power supply ±1V to ±18V s Electrical Characteristics (VCC=5V, Ta=25˚C) Parameter Input offset voltage Input offset current Input bias current Voltage gain Common-mode input voltage range Supply current Response time Output sink current Low level output voltage Output terminal leakage current Symbol VI (offset) IIO IBias GV VCM ICC tr ISINK VOL IO (Leak) RL= ∞ RL=5.1kΩ, VRL=5V VREF= 0V, VIN=1V, VO