AN6916S

AN6915, AN6916, AN6916S Large Sink Current Dual Comparators AN6915 s Overview The AN6915, the AN6916 and the AN6916S are dual voltage comparators with large output sink current and wide range of operating supply voltage. 23.3±0.3 2.4±0.25 3.3±0.25 6.0±0.3 Unit:mm 8 0.5±0.1 7 6 5 4 s Features • Large sink current (70mA), direct drive for relays or lamps • Wide range of supply voltage:VCC (opr.)=2 to 36V • Wide range common-mode input voltage :0 to VCC–1.5V • Open collector output 1.5±0.25 2 1 0.3 – 0.05 + 0.1 3.0±0.3 9-pin SIL Plastic Package (SIP009-P-0000C) AN6916 1.4±0.3 30˚ 3 1.5±0.25 2.54 9 Unit:mm 0.5±0.1 1.2±0.25 0.51min. 3.8±0.25 (3.45) + 0.1 1 9.4±0.3 8 7 2 3 4 6.3±0.3 5 s Block Diagram AN6915 7.62±0.25 – Ch.1 + – Ch.2 + 3—15˚ 0.15 – 0.05 8-pin DIL Plastic Package (DIP008-P-0300B) 1 VCC 2 3 4 5 6 7 8 9 VCC AN6916S Unit:mm VO1 Vin1– Vin1+ (GND) Vin2+ Vin2– VO2 AN6916,AN6916S VCC 8 VO2 7 Vin2– 6 – + 0.6±0.3 0.4±0.25 2 1.27 3 4 7 6 5 5 Ch.2 0.1±0.1 1.5±0.2 0.3 4.2±0.3 6.5±0.3 0.15 0.65 – Ch.1 + 1 VO1 2 Vin1– 3 Vin1+ 4 GND 8-pin PANAFLAT Plastic Package (SOP008-P-0225A) 5.0±0.3 Vin2+ 1 8 2.54 6 s Pin Descriptions 〈AN6915〉 Pin No. 1 2 3 4 5 6 7 8 9 VCC Ch.1 output Ch.1 inverting input Ch.1 non inverting input GND Ch.2 non inverting input Ch.2 inverting input Ch.2 output VCC Pin name 〈AN6916, AN6916S〉 Pin No. 1 2 3 4 5 6 7 8 Pin name Ch.1 output Ch.1 inverting input Ch.1 non inverting input GND Ch.2 non inverting input Ch.2 inverting input Ch.2 output VCC s Absolute Maximum Ratings (Ta=25˚C) Parameter Supply voltage Common-mode input voltage Differential input voltage Output current Power dissipation AN6915, AN6916 AN6916S AN6915, AN6916 AN6916S Symbol VCC VICM *1 VID *2 IOL *3 PD Topr Tstg Rating 36 – 0.3 to +36 36 150 500 360 –30 to +85 –55 to +150 –55 to +125 Unit V V V mA mW ˚C ˚C Operating ambient temperature Storage temperature *1 The common mode input voltage is a voltage applied to the non-inverting input pin and inverting input pin simultaneously. *2 Differential input is equivalent to the potential difference between the non-inverting input pin and inverting input pin. *3 In case output level is “L”. s Electrical Characteristics (VCC=5V, Ta=25˚C) Parameter Input offset voltage Input offset current Input bias current Voltage gain Common-mode input voltage range Supply current Response time (1) Response time (2) Low level output voltage Output leakage current Symbol VI (offset) IIO IBias GV VCM ICC tPLH tPHL VOL IO (Leak) RL=∞ RL=5.1kΩ RL=5.1kΩ VREF= 0V, VI=1V, ISINK=70mA VREF=1V, VI= 0V, VO=5V RL=15kΩ 0 3.8 2 1 0.14 0.4 0.1 Condition min typ 1 1 50 200 VCC–1.5 5.3 max 5 50 200 Unit mV nA nA V/mV V mA µs µs V µA s Characteristics Curve ICC –VCC 10 100 IBias–VCC 1.6 VOL–ISINK Low-Level Output Voltage VO (V) 1.4 1.2 1.0 Ta=85˚C 0.8 0.6 Ta=25˚C 0.4 0.2 Ta=–30˚C 0 Supply Current ICC (mA) 8 Input Bias Current IBias (nA) 80 Ta=–30˚C 60 Ta=25˚C 40 Ta=85˚C 6 Ta=–30˚C Ta=25˚C 4 Ta=85˚C 2 20 0 0 10 20 30 40 0 0 10 20 30 40 0 40 80 120 160 200 Supply Voltage VCC (V) Supply Voltage VCC (V) Output Sink Current ISINK (mA) Input Voltage VI (mV) Output Voltage VO (V) 0.24 VCC=5V ISINK=70mA 0.20 6 VCC=5V 5 4 80mV 3 2 1 0 100 50 0 0 1 2 3 4 5 6 Overdrive 5mV 20mV 50mV Input Voltage VI (mV) Output Voltage VO (V) VOL–Ta Transfer Characteristics (1) Transfer Characteristics (2) 6 VCC=5V 5 Overdrive 4 3 2 80mV 1 5mV 0 0 –50 –100 0 1 2 3 4 5 6 20mV 50mV Output Voltage VOL (V) 0.16 0.12 0.08 0.04 0 –60 –40 –20 0 20 40 60 80 100 Ambient Temperature Ta (˚C) Time tPLH (µs) Time tPLH (µs) s Schematic Diagram (1/2) No pin for AN6916 and AN6916S. 1 8 9 s Application Circuit VCC D1 Q2 Q1 Q3 Q4 D2 VREF Q9 Q8 Q7 Q5 Q6 Vin – AN6915 AN6916/S + Relay AE-1353 The relay is OFF when Vin>VREF. The relay is ON when Vin