ICs for FM/AM Tuner
AN7289NSC
FM-FE+AM IC for car radio
s Overview
The AN7289NSC is an IC having FM-FE+AM functions for car radio. A tuner block of car radio can be constructed by combination of this IC and the AN7293NSC / NFBQ.
17.81±0.3 32 17
Unit: mm
s Features
• A less number of electrolytic capacitors is required (3 capacitors reduction compared with our conventional IC) • AM: Practical sensitivity is improved by 2 dB by ATC • AM: Strong input characteristics is improved by 2-loop AGC function
1 16
7.2±0.3 9.3±0.3
1.23
1.0 Seating plane
s Applications
• Car radios
SSOP032-P-0375
s Block Diagram
GND2
32
31
30
29
28
27
26
25
24
23
22
21
20
19
0.1±0.1 0.9
0.35±0.1
18 15
2.0±0.2
0.15
FE OSC
AM OSC
FM AGC
FM/AM SW
FM mix.
AM RF-AGC
AM mix.
AM.S-meter
FM IF-amp.
AM ATC
1 2 3
AM IF-AGC
4 5
AM det.
6 7
AM SSC
10 8 9
AM IF-amp.
11 12 13 14 16
1
GND1
VCC
17
0.3
AN7289NSC
s Pin Description
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Description FM-keyed-AGC input AM-AF output / LO setting AM-ATC input AM-IF level detection AM detection output VCC1 AM-IF counter output / DX / LO SW AM-SD output AM-signal meter output FM-IF output AM-IF output GND1 SSC AM-RF level detection AM-WAGC detection / DX setting AM-IF input AM-mix. output 31 32 Pin No. 18 19 20 21 22 23 24 25 26 27 28 29 30
ICs for FM/AM Tuner
Description FM-IF input AM-RF gain control AM-mix. input FM-PIN-diode driver AM-OSC coil pin FM-mix. output (2) FM-mix. output (1) FM-PIN-diode driver FM-mix. input VCC2 / FM / AM SW FM-AGC output FM-OSC buffer output AM-OSC buffer output / FE-AGC sensitivity setting GND2 FM-OSC coil pin
s Absolute Maximum Ratings
Parameter Supply voltage Supply current Power dissipation
*2 *1
Symbol VCC ICC PD Topr Tstg
*1
Rating 9.1 56 380.2 −35 to +80 −55 to +125
Unit V mA mW °C °C
Operating ambient temperature Storage temperature
Note) *1 : Except for the power dissipation, operating ambient temperature, and storage temperature, all ratings are for Ta = 25°C. *2: Ta = 80°C
s Recommended Operating Range
Parameter Supply voltage Symbol VCC Range 7.2 to 9.0 Unit V
2
ICs for FM/AM Tuner
s Electrical Characteristics at Ta = 25°C
1. AM mode VCC = 8.0 V, fIN = 1 MHz
AM tuning condition: OSC output frequency = 1 450 kHz ±500 Hz
AN7289NSC
Parameter AM consumption current AM-AF output AM signal-to-noise ratio AM-AGC width AM-ATC operation
Symbol amIt1 amVO amSN amW amATC
Conditions Without input AM-AF output at VIN2 = 74 dBµ, 400 Hz 30% AM-AF output S/N at VIN2 = 74 dBµ, 400 Hz 30% AM-AF output when input changes −10 dB at VIN2 = 74 dBµ, 400 Hz 30% (Output ratio [dB] of 400 Hz and 3 kHz when VIN2 = 18 dBµ) − (Output ratio [dB] of 400 Hz and 3 kHz when VIN2 = 74 dBµ) 80% Mod., AM-AF Out output VIN2 = 74 dBµ 400 Hz 80% AM-AF output distortion VIN2 = 130 dBµ 400 Hz 80% AM-AF output distortion fIN2 = 1.4 MHz Input when pin 15 voltage becomes below 3 V Without input VIN2 = 40 dBµ Without input VIN2 = 40 dBµ Without input Without input, pin 9 voltage Pin 9 voltage at VIN2 = 30 dBµ Pin 9 voltage at VIN2 = 130 dBµ AM-IF count output is 120 mV or over VIN2 when f becomes 450 kHz ±2 kHz AM-IF count output is 120 mV or over VIN2 when f becomes 450 kHz ±2 kHz
Min 28 100 48 55 3.5
Typ 36 125 52 59 6.5
Max 44 155 58 63 9.5
Unit mA mA dB dB dB
AM-distortion 1 AM-distortion 2 AM wide band AGC on input AM local oscillation buffer output AM-IF count output 1 AM-IF count output 2 AM-SD output 1 AM-SD output 2 AM signal meter output 1 AM signal meter output 2 AM signal meter output 3 AM search sensitivity DX AM search sensitivity LO
amT1 amT2 amVW amVOS amIF1 amIF2 amSD1 amSD2 amVS1 amVS2 amVS3 amDX amLO
0.01 0.01 97 160 150 4.5 0.0 1 0.7 4.1 24 44
0.5 0.5 103 210 210 4.9 0.2 50 0.95 4.8 30 50
1.5 1.5 109 260 270 10 5.1 0.5 200 1.2 5.1 36 56
% % dBµ mV mV mV V V mV V V dBµ dBµ
3
AN7289NSC
s Electrical Characteristics at Ta = 25°C (continued)
2. FM mode VCC = 8.0 V, fIN1 = 98 MHz
FM tuning condition: OSC output frequency = 108.7 MHz ±10 kHz
ICs for FM/AM Tuner
Parameter FM local oscillation buffer output FM-IF output level FM-AGC sensitivity FM-AGC voltage (high) FM-AGC voltage (low) FM consumption current
Symbol fmVOS fmIF fmAGC fmVaH fmVaL fmIt
Conditions fOSC = 108.7 MHz without input VIN1 = 71 dBµ VIN1 level when V28 becomes 3 V VIN1 = 70 dBµ V28 VIN1 = 82 dBµ V28 Without input
Min 140 50 59 6.0 26
Typ 200 95 63 6.4 0.05 35
Max 260 140 67 6.8 0.5 44
Unit mV mV dBµ V V mA
s Application Circuit Example
AM-VT
FM-MIX In
VfOSC VaOSC FE-VT
32
31
30
29
28
27
26
25
FM-Pin D
FM-AGC
24
23
22
21
AM-ANT 20
19
18 15
FE OSC
AM OSC
FM AGC
FM/AM SW
FM mix.
AM RF-AGC
AM mix.
AM.S-meter
FM IF-amp.
AM ATC
AM IF-AGC
AM det.
AM SSC
AM IF-amp.
10
11
12
13
14
KEYED-AGC In
16
1
2
3
4
5
6
7
8
9
17
VCC
AM-IF Count
AM-SD Out AM-S.Meter
AM-AF Out
4
FM-IF Out
5V
很抱歉,暂时无法提供与“AN7289”相匹配的价格&库存,您可以联系我们找货
免费人工找货