AN7397K

ICs for Audio Common Use AN7397K, AN7397S Spatializer IC for I2C bus ■ Overview Spatializer Audio Processor is a signal processing technology, monopolized by Desper Products, Inc., that was developed for commercial electronics and multimedia markets, and is based on Desper's “PRO Spatializer” that is a 3-D audio production system for business use. The AN7397K, AN7397S utilizes the innovative technology adopted in that system, and provides sound enhancement effect and sound expansion with the conventional 2-speaker stereo system. AN7397K 19.1±0.3 20 11 Unit: mm 6.35±0.30 1 10 1.1±0.25 3.45±0.25 4.50±0.25 1.778 0.9±0.25 0.5±0.1 3° to 7.62±0.25 1 5° 0.35 – 0.05 +0.1 ■ Features • Provides deep 3-D sound with conventional 2speaker system. • The audio signal recorded through this IC can be reproduced with usual stereo system. • Performs optimal processing to the sound source recorded with surround-effect so as not to give double effects. • Sound localization can be varied. • A pseudo stereo effect for the monaural audio signal is achieved. • Positions and moves each sound source on 270° arc in real time. • An on-chip serial control bus (i.e., I2C) to vary space-effect and change modes. AN7397S 12.6±0.3 20 SDIP020-P-0300 Unit: mm 11 5.4±0.3 7.7±0.3 1 10 0.15 0.4 1.27 0.40±0.25 SOP020-P-0300B ■ Applications • Televisions, videos, audio equipment, DVDs, personal computers, and game machines Note) The packages (SDIP020-P-0300 and SOP020-P-0300B) of this product will be changed to lead-free type (SDIP020-P-0300A and SOP020-P-0300E). See the new package dimensions section later of this datasheet. R-det.2 R-det.1 ■ Pin Assignment Space F-out GND VCA SDA SCL 10 11 R-in VCC F-in 20 19 18 17 16 15 14 13 1 2 3 4 5 6 7 8 L-in R-ret. Mode 1/2 VCC R-out L-ret. L-out S-out Note) Spatializer and the device trademark of circle-in-square are owned by Desper Products Inc. This product can be used with the consent of the Desper Products Inc. Under the terms of the agreement between Matsushita Electric and Desper Products Inc., no technical information on the Spatializer, which is applied to this product, shall be provided. D-GND 9 12 0.65 0.1±0.1 1.5±0.2 0.3 Publication date: October 2002 SDC00027BEB 1 AN7397K, AN7397S ■ Pin Descriptions Pin No. 1 2 3 4 5 6 7 8 9 10 L-in 1/2 VCC L-out S-out R-out R-ret. Mode L-ret. D-GND SCL Description Pin No. 11 12 13 14 15 16 17 18 19 20 SDA R-det.1 R-det.2 VCC Space VCA F-in F-out R-in GND Description ■ Absolute Maximum Ratings Parameter Supply voltage Supply current Power dissipation *2 *1 Symbol VCC ICC PD Topr Tstg Rating 7.0 100 230 −25 to +75 −55 to +125 Unit V mA mW °C °C Operating ambient temperature Storage temperature *1 Note) *1: Except for the operating ambient temperature and storage temperature, all ratings are for Ta = 25°C. *2: The power dissipation shown is the value for Ta = 75°C ■ Recommended Operating Range Parameter Supply voltage Symbol VCC Range 4.5 to 6.8 Unit V 2 SDC00027BEB AN7397K, AN7397S ■ Electrical Characteristics at VCC = 5 V, f = 1 kHz, Ta = 25°C ± 2°C Parameter Total circuit current Maximum output voltage Output noise voltage 1 Voltage gain 1 *3 *2, 3 *3 *1, 4 Symbol ITOTAL VOUT1 VNO1 GV1 THD1 VNO2 GV2 *2, 6 *1, 5 Conditions VIN = 0 mV L-in, R-in THD = 1% L-out, R-out RG = 4.7 kΩ L-out, R-out VIN = 400 mV L-out, R-out VIN = 400 mV S-out RG = 4.7 kΩ S-out VIN = 60 mV S-out VIN = 60 mV Maximum value of sink current of pin 11 at ACK Min 18 0.8  −2   343  2.0 2.5 0  Typ 25 1.0 20 0 0.05 80 450 0.15 Max 32  50 2 0.2 200 685 0.3  3.5 0.5 100 Unit mA V[rms] µV[rms] dB % µV[rms] mV[rms] % Total harmonic distortion 1 Output noise voltage 2 Voltage gain 2 *6 Total harmonic distortion 2 I2C interface THD2 IACK VIHI VILO fImax Sink current at ACK SCL/SDA signal input high- level SCL/SDA signal input low- level Input-enable maximum frequency 10    mA V V Kbit/s Note) *1 : In measuring, the filter with A-characteristic curve is used. *2 : In measuring, the filter for the range of 15 Hz to 30 kHz (12 dB/OCT) is used. *3 : Mode: ST, L-in + R-in, VCA (I2C data: BFH) *4 : Mode: ST, VCA (I2C data: BFH) *5 : Mode: ST, VCA (I2C data: 80 H) *6 : Mode: ST, VCA (I2C data: 80 H) for either L-in or R-in • Design reference data Parameter I2C interface tBUF tSU, STA tHD, STA tLO tHI tR tF tSU, DAT tHD, DAT tSU, ACK tHD, ACK tSU, STO L6 1 LSB = (Data (max.) − Data (00))/63 4.0 4.0 4.0 4.0 4.0   0.25 0  0 4.0             1.0      1.0 0.35   3.5   1.9 µs µs µs µs µs µs µs µs µs µs µs µs LSB step Symbol Conditions Min Typ Max Unit Bus free before start Start condition set-up time Start condition hold time SCL/SDA low period SCL high period SCL/SDA rise time SCL/SDA fall time Data set-up time (Write) Data hold time (Write) Acknowledge set-up time Acknowledge hold time Stop condition set-up time DAC 6-bit DAC DNLE 0.1 SDC00027BEB 3 AN7397K, AN7397S ■ Electrical Characteristics at VCC = 5 V, f = 1 kHz, Ta = 25°C ± 2°C (continued) • DAC timing chart Start condition SDA tBUF SCL tSU.STA tHD.STA tR tF tHI tLO tSU.DAT tHD.DAT tLO tSU.STO Slave address ACK Data byte Stop ACK condition ■ Conceptual Explanation of Spatializer Operation • Normal stereo All sounds are heard from only between two speakers, right and left. • Conventional surround The sound expands toward the outside of the speaker system, but the sound position comes apart mostly in the conventional systems. • Spatializer The sound expands toward the outside of the two speakers, and yet their positions are stable and an expanded, deep sound are gotten. 4 SDC00027BEB AN7397K, AN7397S ■ Application Circuit Example (Basic circuitry) R-in VCC I2 C GEN 10 µF 10 µF A B A 11 SDA SCL 10 1 µF 100 nF 1 µF 10 nF 18 F-out 16 VCA 17 F-in 150 kΩ 22 µF * GND 13 R-det.2 1 1/2 VCC 2 3 4 5 R-ret. 6 7 L-ret. 8 47 nF 33 µF 2.2 µF 2.2 µF 2.2 µF 1 µF GND 47 nF D-GND 9 Mode 12 R-det.1 15 Space 20 19 14 B L-in Note) When switching noise occurs at mode switching, insert a capacitor between pin 7 and GND. *: For the capacitor of 22 µF, use that of a non-polar type. R-out L-out S-out SDC00027BEB 5 AN7397K, AN7397S ■ New Package Dimensions (Unit: mm) • SDIP020-P-0300A (Lead-free package) 19.06±0.30 20 11 1 10 3.55±0.20 1.10±0.25 3.45±0.25 4.50±0.25 6.35±0.20 0.25 -0.05 7.62 +0.10 (1.529) 1.778 0.50±0.10 0.90±0.10 3° to 15° Seating plane • SOP020-P-0300E (Lead-free package) 12.63±0.20 20 11 5.50±0.20 7.60±0.30 0.15-0.05 +0.10 0° to 10° 0.30±0.20 (0.60) 1.27 Seating plane 0.10±0.10 1.50±0.20 1 10 0.40+0.10 -0.05 Seating plane 6 SDC00027BEB Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL