AQY221N3MW

PhotoMOS.book Page 155 Thursday, March 26, 2009 2:21 PM RF SON 1 Form A C×R5 (AQY221N3M) Micro-miniature SON package Lower output capacitance and on resistance (C×R5) 25V load voltage RF SON 1 Form A C×R5 (AQY221N3M) New FEATURES 2.95 .116 2.20 .087 1.40 .055 mm inch 1 4 2 3 1. Super miniature SON* package contributes to space savings and high density mounting. The SON type is a new PhotoMOS relay with approximately 43% the volume ratio of existing SSOP type. The super miniature leadless construction reduces the mounting area and enables high density mounting. *Small Outline No-lead package Reduced to approximately 43% volume ratio 2. Lower output capacitance and onresistance Output capacitance (Cout): 1.1pF (typ.) On resistance (Ron): 5.5Ω (typ.) 3. High speed switching Turn on time: 0.02ms (typ.) Turn off time: 0.02ms (typ.) TYPICAL APPLICATIONS Measuring and testing equipment 1. Testing equipment IC tester, Semiconductor performance tester, Probe cards, etc. 2. Board tester Bare board tester, In-circuit tester, Function tester, etc. Compliance with RoHS Directive Previous SSOP package (L: 2.65 × W: 4.45 × H: 1.80) (L: .104 × W: .175 × H: .071) H: 1.4 .055 New SON package L: 2.2 .087 W: 2.95 .116 Area comparison (including leads) Previous SOP4pin 100% Previous SSOP 44% SON 22% Flat lead Leadless TYPES Output rating*1 AC/DC dual use Load voltage 25 V Load current 150 mA Package SON Tape and reel packing style*2 Picked from the 1 and 4-pin side AQY221N3MY Picked from the 2 and 3-pin side AQY221N3MW Packing quantity in tape and reel 3,500 pcs. Notes: *1 Indicate the peak AC and DC values. *2 Only tape and reel package is available. For space reasons, only “1N3” is marked on the product as the part number. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Output Continuous load current Power dissipation Total power dissipation I/O isolation voltage Operating temperature Storage temperature Symbol IF VR IFP Pin VL IL Pout PT Viso Topr Tstg AQY221N3M 50mA 5V 1A 75mW 25V 0.15A 250mW 300mW 200V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f=100 Hz, Duty factor=0.1% Peak AC, DC Non-condensing at low temperatures All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 156 Thursday, March 26, 2009 2:21 PM RF SON 1 Form A C×R5 (AQY221N3M) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item LED operate current Input LED turn off current LED dropout voltage On resistance Maximum Output Typical Output capacitance Maximum Off state leakage current Turn on time* Maximum Transfer characteristics Typical Turn off time* Maximum I/O capacitance Typical Maximum Ciso Toff 0.2 ms 0.8 pF 1.5 pF Typical Maximum Typical Ton 0.2 ms 0.02 ms ILeak Cout 1.5 pF 0.01 nA 10 nA 0.02 ms Typical Maximum Minimum Typical Typical Maximum Typical Ron Symbol IFon IFoff VF AQY221N3M 1.0 mA 3.0 mA 0.2 mA 0.9 mA 1.35 V (1.14 V at IF = 5 mA) 1.5 V 5.5Ω 7.5Ω 1.1 pF Condition IL = 80 mA IL = 80 mA IF = 50 mA IF = 5 mA IL = 80 mA Within 1 s on time IF = 0 mA VB = 0 V f = 1 MHz IF = 0 mA VL = Max. IF = 5 mA VL = 10 V RL = 125Ω IF = 5 mA VL = 10 V RL = 125Ω f = 1 MHz VB = 0 V Note: Variation possible through combinations of output capacitance and on resistance. For more information, please contact our sales office in your area. *Turn on/Turn off time Input 90% 10% Output Ton Toff RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Input LED current Symbol IF Recommended value 5 Unit mA ■ For Dimensions ■ For Schematic and Wiring Diagrams ■ For Cautions for Use ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Electric Works technical representative. For more information REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F 200 2. Load current vs. Load voltage characteristics Ambient temperature: 25°C 77°F 3. On resistance vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Load current: 80mA (DC) 200 10 Load current, mA 150 Load current, mA 150 On resistance, Ω 8 6 100 100 4 50 50 2 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, °C 0 0 5 10 15 20 25 Load voltage, V 30 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 157 Thursday, March 26, 2009 2:21 PM RF SON 1 Form A C×R5 (AQY221N3M) 4. Turn on time vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) 0.1 5. Turn off time vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) 0.1 6. LED operate current vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC) 5 LED operate current, mA Turn on time, ms 0.06 Turn off time, ms 0.08 0.08 4 0.06 3 0.04 0.04 2 0.02 0.02 1 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C 7. LED turn off current vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC) 5 LED operate current, mA 8. LED dropout voltage vs. ambient temperature characteristics LED current: 5 to 50 mA 9. Current vs. voltage characteristics of output at MOS portion Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Current, mA -2 -1.5 -1 150 100 50 -0.5 0.5 -50 -100 -150 Voltage, V 1 1.5 Voltage, V 2 1.5 LED dropout voltage, V 1.4 1.3 50mA 1.2 1.1 1 0.9 30mA 20mA 10mA 5mA Load current, mA Turn off time, ms 4 3 2 1 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C -40 -20 0 20 40 60 80 85 Ambient temperature, °C 10. Off state leakage current vs. load voltage characteristics Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 11. Turn on time vs. LED forward current characteristics Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25°C 77°F 0.1 12. Turn off time vs. LED forward current characteristics Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25°C 77°F 0.5 10-3 Leakage current, A 10-5 10-7 10-9 10-11 10-13 Turn on time, ms 0.08 0.4 0.06 0.3 0.04 0.2 0.02 0.1 0 5 10 15 20 25 Load voltage, V 30 0 0 10 20 30 40 50 LED forward current, mA 60 0 0 10 20 30 40 50 LED forward current, mA 60 13. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 3 and 4 Frequency: 1 MHz, 30m Vrms; Ambient temperature: 25°C 77°F 2.5 Output capacitance, pF 14. Isolation vs. frequency characteristics (50Ω impedance) Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 100 15. Insertion loss vs. frequency characteristics (50Ω impedance) Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 2 Insertion loss, dB 2 Isolation, dB 80 1.5 1.5 60 1 1 40 0.5 0.5 20 0 0 5 10 15 20 25 Applied voltage, V 30 05 10 106 107 Frequency, Hz 108 04 10 105 106 Frequency, Hz 107 All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 158 Thursday, March 26, 2009 2:21 PM RF SON 1 Form A C×R5 (AQY221N3M) 16. On resistance distribution Measured portion: between terminals 3 and 4 Continuous load current: 80mA (DC), n: 50pcs. Ambient temperature: 25°C 77°F 40 35 30 Quantity, n Quantity, n 25 20 15 10 10 5 0 2 3 4 5 6 7 On resistance, Ω 8 0 0 0.02 0.04 0.06 0.08 Turn on time, ms 0.1 0 0 0.02 0.04 0.06 0.08 Turn on time, ms 0.1 10 40 Quantity, n 40 17. Turn on time distribution Load voltage: 10V (DC) Continuous load current: 80mA (DC), n: 50pcs. Ambient temperature: 25°C 77°F 50 18. Turn off time distribution Load voltage: 10V (DC) Continuous load current: 80mA (DC), n: 50pcs. Ambient temperature: 25°C 77°F 50 30 30 20 20 19. LED operate current distribution Load voltage: 10V (DC) Continuous load current: 80mA (DC), n: 50pcs. Ambient temperature: 25°C 77°F 30 25 Quantity, n 20 15 10 5 0 0.4 0.6 0.8 1 1.2 1.4 1.6 LED operate current, mA 1.8 All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.