ECEA1AKA221Q

Aluminum Electrolytic Capacitors/ KA Radial Lead Type Series: Low Profile KA Type: A 7 mm height KA M ■ Features ● Endurance : 85° C 1000 h ● 7 mm height ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ –40 °C to +85 °C 4 V.DC to 50 V.DC 0.1 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached standard products list After applying rated working voltage for 1000 hours at +85 °C±2 °C when the capacitors are restored to 20 °C, capacitors shall meet the following limits. Endurance Capacitance change ± 20% of initial measured value tan δ DC leakage current Shelf Life < 200 % of initial specified value < initial specified value After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) ■ Dimensions in mm (not to scale) [mm] Sleeve φd±0.05 + – L±1.0 14 min. 3 min. φD±0.5 F±0.5 (mm) Body Dia. φD Lead Dia. φd Lead space F 4 0.45 1.5 5 0.45 2.0 6.3 0.45 2.5 8 0.45 3.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Apr. 2008 Aluminum Electrolytic Capacitors/ KA ■ Standard Products Case size W.V. Cap. (±20 %) (µF) 47 100 220 4 330 470 47 100 6.3 220 330 33 10 100 220 10 22 16 33 47 100 10 25 22 33 47 10 22 35 33 47 0.1 0.22 0.33 0.47 1 50 2.2 3.3 4.7 10 22 33 Dia. (mm) 4 5 6.3 8 8 8 8 4 5 6.3 8 8 4 6.3 8 8 4 4 5 5 6.3 4 5 6.3 6.3 5 6.3 6.3 8 8 4 4 4 4 4 4 4 4 5 6.3 8 8 Specification Ripple tan δ Current Length (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mm) (mA r.m.s.) 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 34 61 82 110 110 140 140 46 71 103 130 130 43 80 120 120 28 39 60 70 91 28 55 65 70 30 60 65 85 85 1 2 3 5 10 16 18 23 35 60 75 75 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.24 0.24 0.24 0.24 0.24 0.20 0.20 0.20 0.20 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Lead Length Lead Dia. Lead Space Straight (mm) 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.5 3.5 5.0 1.5 1.5 2.0 2.0 2.5 1.5 2.0 2.5 2.5 2.0 2.5 2.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.5 2.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.5 2.0 2.5 3.5 5.0 5.0 5.0 2.5 2.5 2.5 3.5 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 (mm) 1.5 2.0 2.5 3.5 5.0 2.5 Taping Taping ✽B ✽i (mm) 5.0 5.0 5.0 (mm) 2.5 2.5 2.5 2.5 ECEA0GKA470( ) ECEA0GKA101( ) ECEA0GKA221( ) ECEA0GKA331( ) ECEA0GKA331Q ECEA0GKA471( ) ECEA0GKA471Q ECEA0JKA470( ) ECEA0JKA101( ) ECEA0JKA221( ) ECEA0JKA331( ) ECEA0JKA331Q ECEA1AKA330( ) ECEA1AKA101( ) ECEA1AKA221( ) ECEA1AKA221Q ECEA1CKA100( ) ECEA1CKA220( ) ECEA1CKA330( ) ECEA1CKA470( ) ECEA1CKA101( ) ECEA1EKA100( ) ECEA1EKA220( ) ECEA1EKA330( ) ECEA1EKA470( ) ECEA1VKA100( ) ECEA1VKA220( ) ECEA1VKA330( ) ECEA1VKA470( ) ECEA1VKA470Q ECEA1HKA0R1( ) ECEA1HKAR22( ) ECEA1HKAR33( ) ECEA1HKAR47( ) ECEA1HKA010( ) ECEA1HKA2R2( ) ECEA1HKA3R3( ) ECEA1HKA4R7( ) ECEA1HKA100( ) ECEA1HKA220( ) ECEA1HKA330( ) ECEA1HKA330Q 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 Part No. Straight Taping Leads (pcs) 200 200 200 200 (pcs) 2000 2000 2000 1000 1000 1000 1000 2000 2000 2000 1000 1000 2000 2000 1000 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 Min. Packaging Q'ty (V) Endurance : 85 °C 1000 h When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008