ECEA1CSN220

Aluminum Electrolytic Capacitors/ KS-(Bi-polar) Radial Lead Type Series: KS(Bi-polar) Type: A ■ Features ● Endurance : 85° C 1000 h ● 5 mm height ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ –40 °C to +85 °C 63 V.DC to 50 V.DC 0.1 µF to 47 µF ±20 % (120 Hz/+20 °C) I < 0.05 CV or 10 (µA) After 2 minutes (Whichever is greater) Please see the attached standard products list After 1000 hours application of DC working voltage (500 hours for each polarity) at +85 °C±2 °C, when the capacitors are restored to 20 °C, the capacitors shall meet the following limits. Endurance Capacitance change tan δ DC leakage current Shelf Life ± 20% of initial measured value < 200 % of initial specified value < initial specified value After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) ■ Dimensions in mm (not to scale) [mm] Sleeve φd±0.05 L±1.0 14 min. 3 min. φD±0.5 F±0.5 (mm) Body Dia. φD Lead Dia. φd Lead space F 4 0.45 1.5 5 0.45 2.0 6.3 0.45 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Apr. 2008 Aluminum Electrolytic Capacitors/ KS-(Bi-polar) ■ Standard Products (Bi-polar) Case size W.V. Cap. (±20 %) (µF) 22 6.3 33 47 10 10 22 33 4.7 16 10 22 3.3 25 35 4.7 10 2.2 0.1 0.22 50 0.33 0.47 1 2.2 Dia. (mm) 5 6.3 6.3 4 6.3 6.3 4 5 6.3 5 5 6.3 4 4 4 4 4 4 5 Specification Ripple tan δ Current Length (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mm) (mA r.m.s.) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 29 38 46 25 35 43 20 25 39 18 21 28 12 1 2 3 5 10 16 0.24 0.24 0.24 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Lead Length Lead Dia. Lead Space Straight (mm) 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 (mm) 2.0 2.5 2.5 1.5 2.5 2.5 1.5 2.0 2.5 2.0 2.0 2.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 Taping Taping ✽B ✽i (mm) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 (mm) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 ECEA0JSN220( ) ECEA0JSN330( ) ECEA0JSN470( ) ECEA1ASN100( ) ECEA1ASN220( ) ECEA1ASN330( ) ECEA1CSN4R7( ) ECEA1CSN100( ) ECEA1CSN220( ) ECEA1ESN3R3( ) ECEA1ESN4R7( ) ECEA1ESN100( ) ECEA1VSN2R2( ) ECEA1HSN0R1( ) ECEA1HSNR22( ) ECEA1HSNR33( ) ECEA1HSNR47( ) ECEA1HSN010( ) ECEA1HSN2R2( ) Part No. Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 (pcs) 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 Min. Packaging Q'ty (V) Endurance : 85 °C 1000 h (500hours for each polarity) When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008