ECEC2DP391CJ

Aluminum Electrolytic Capacitors/ UP Snap-in Type Series: UP n Features Type : TS Endurance: 85°C 2000 h Length 20 mm RoHS directive compliant Country of Origin Japan Malaysia U.S.A (ii) (ii) Regarding USA product, , Please check PEDCA s Catalog. -25 to + 85°C 315 to 450 V .DC 33 to 820 µ F ±20 % (120Hz/+20°C) n Recommended Applications n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current Smoothing circuits, AC adaptor, -40 to + 85°C 16 to 250 V .DC 120 to 68000 µ F 3√CV (µA) max. after 5 minutes application of rated working voltage at +20°C. C:Capacitance(µF) V: W.V. (V.DC) Please see the attached standard products list tan δ Frequency (Hz) 50 60 100 120 500 1k 10k to Frequency Correction 0.95 0.99 1.00 1.05 1.08 1.15 16 to 100V 0.93 Factor for Ripple Current Correction Factor 0.80 0.95 1.00 1.20 1.25 1.40 160 to 450V 0.75 After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +85°C, the capacitor shall meet the following limits. Capacitance change ±20 % of initial measured value Endurance tan δ < 200 % of initial specified value DC leakage current < initial specified value Shelf Life After storage for 1000 hours at +85±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) n Dimensions in mm (not to scale) (10.0) 2-φ2.0±0.1 10.0±0.1 Polarity bar φD+1.0 max PET Sleeve Vent L+2.0 max 4.0 ± 0.5 Recommended PWB piercing plan 0.8 - 0.1 4.0±0.5 +0.2 Terminal 2.0 max (t= 0.8) (3.5) Bottom of can 1.5 ± 0.2 Standard terminal type does not require terminal trimming process. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE174  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) Cap. (±20%) Case size Dia. Specification Part No. PET sleeve Terminal Length (Without P.V.C.plate) Min.PackagingQ'ty (µF) 10000 12000 15000 18000 22000 (mm) 22 25 22 25 22 25 22 25 22 25 30 Ripple tan δ Length current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 30 25 30 25 35 30 40 30 45 35 30 45 35 50 40 30 45 35 50 40 45 50 30 25 30 25 35 30 25 40 35 30 50 40 30 45 35 50 40 45 35 50 3.78 3.78 4.52 4.52 5.26 5.26 5.57 5.57 6.10 6.10 6.10 6.31 6.31 6.84 6.84 6.84 6.94 6.94 7.47 7.47 8.73 9.05 3.47 3.47 3.57 3.57 3.78 3.78 3.78 4.10 4.10 4.10 4.63 4.63 4.63 5.47 5.47 6.10 6.10 6.21 6.21 6.84 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.56 0.56 0.64 0.64 0.73 0.85 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 ECEC1CP103BJ ECEC1CP103CJ ECEC1CP123BJ ECEC1CP123CJ ECEC1CP153BJ ECEC1CP153CJ ECEC1CP183BJ ECEC1CP183CJ ECEC1CP223BJ ECEC1CP223CJ ECEC1CP223DJ ECEC1CP273CJ ECEC1CP273DJ ECEC1CP333CJ ECEC1CP333DJ ECEC1CP333EJ ECEC1CP393DJ ECEC1CP393EJ ECEC1CP473DJ ECEC1CP473EJ ECEC1CP563EJ ECEC1CP683EJ ECEC1EP682BJ ECEC1EP682CJ ECEC1EP822BJ ECEC1EP822CJ ECEC1EP103BJ ECEC1EP103CJ ECEC1EP103DJ ECEC1EP123BJ ECEC1EP123CJ ECEC1EP123DJ ECEC1EP153BJ ECEC1EP153CJ ECEC1EP153DJ ECEC1EP183CJ ECEC1EP183DJ ECEC1EP223CJ ECEC1EP223DJ ECEC1EP273DJ ECEC1EP273EJ ECEC1EP333DJ 16 27000 33000 25 30 25 30 35 39000 47000 56000 68000 6800 8200 10000 30 35 30 35 35 35 22 25 22 25 22 25 30 12000 25 15000 22 25 30 22 25 30 18000 22000 27000 33000 25 30 25 30 30 35 30 Endurance : 85° C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE175  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) 25 Cap. (±20%) Case size Dia. Specification Part No. PET sleeve Terminal Length (Without P.V.C.plate) Min.Packaging Q'ty (µF) 33000 39000 47000 4700 5600 6800 8200 10000 (mm) 35 35 35 22 25 22 25 22 25 22 25 22 25 30 35 Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (pcs) 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 40 45 50 30 25 30 25 35 30 40 35 45 40 30 25 45 35 30 50 40 30 45 35 50 40 45 50 30 25 30 25 35 30 25 40 35 30 50 40 30 45 35 6.84 7.36 8.00 3.26 3.26 3.36 3.36 3.68 3.68 4.00 4.00 4.42 4.42 4.42 4.42 5.05 5.05 5.05 5.57 5.57 5.57 5.68 5.68 6.10 6.10 6.84 7.15 2.73 2.73 2.75 2.75 3.03 3.03 3.03 3.42 3.42 3.42 3.85 3.85 3.85 4.41 4.41 0.40 0.46 0.54 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 ECEC1EP333EJ ECEC1EP393EJ ECEC1EP473EJ ECEC1VP472BJ ECEC1VP472CJ ECEC1VP562BJ ECEC1VP562CJ ECEC1VP682BJ ECEC1VP682CJ ECEC1VP822BJ ECEC1VP822CJ ECEC1VP103BJ ECEC1VP103CJ ECEC1VP103DJ ECEC1VP103EJ ECEC1VP123CJ ECEC1VP123DJ ECEC1VP123EJ ECEC1VP153CJ ECEC1VP153DJ ECEC1VP153EJ ECEC1VP183DJ ECEC1VP183EJ ECEC1VP223DJ ECEC1VP223EJ ECEC1VP273EJ ECEC1VP333EJ ECEC1HP332BJ ECEC1HP332CJ ECEC1HP392BJ ECEC1HP392CJ ECEC1HP472BJ ECEC1HP472CJ ECEC1HP472DJ ECEC1HP562BJ ECEC1HP562CJ ECEC1HP562DJ ECEC1HP682BJ ECEC1HP682CJ ECEC1HP682DJ ECEC1HP822CJ ECEC1HP822DJ 35 12000 25 30 35 15000 25 30 35 18000 22000 27000 33000 3300 3900 4700 50 5600 30 35 30 35 35 35 22 25 22 25 22 25 30 22 25 30 6800 22 25 30 8200 25 30 Endurance : 85° C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE176  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) Cap. (±20%) Case size Dia. Specification Part No. PET sleeve Terminal Length Min.Packaging Q'ty (µF) 10000 (mm) 25 30 35 Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (Without P.V.C. plate) (pcs) 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 200 200 200 200 200 200 200 200 200 50 40 30 45 35 50 40 45 50 30 25 35 30 40 30 25 45 35 30 50 40 30 25 45 35 30 50 40 30 45 35 40 50 30 25 35 30 40 30 25 45 35 4.97 4.97 4.97 5.58 5.58 6.44 6.44 6.94 7.57 2.52 2.52 3.73 3.73 4.10 4.10 4.10 4.44 4.44 4.44 4.86 4.86 4.86 4.86 5.36 5.36 5.36 5.84 5.84 5.84 6.00 6.00 6.52 7.15 2.26 2.26 2.52 2.52 2.73 2.73 2.73 2.78 2.78 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 ECEC1HP103CJ ECEC1HP103DJ ECEC1HP103EJ ECEC1HP123DJ ECEC1HP123EJ ECEC1HP153DJ ECEC1HP153EJ ECEC1HP183EJ ECEC1HP223EJ ECEC1JP222BJ ECEC1JP222CJ ECEC1JP272BJ ECEC1JP272CJ ECEC1JP332BJ ECEC1JP332CJ ECEC1JP332DJ ECEC1JP392BJ ECEC1JP392CJ ECEC1JP392DJ ECEC1JP472BJ ECEC1JP472CJ ECEC1JP472DJ ECEC1JP472EJ ECEC1JP562CJ ECEC1JP562DJ ECEC1JP562EJ ECEC1JP682CJ ECEC1JP682DJ ECEC1JP682EJ ECEC1JP822DJ ECEC1JP822EJ ECEC1JP103EJ ECEC1JP123EJ ECEC1KP152BJ ECEC1KP152CJ ECEC1KP182BJ ECEC1KP182CJ ECEC1KP222BJ ECEC1KP222CJ ECEC1KP222DJ ECEC1KP272BJ ECEC1KP272CJ 50 12000 15000 18000 22000 2200 2700 3300 30 35 30 35 35 35 22 25 22 25 22 25 30 3900 22 25 30 4700 63 22 25 30 35 5600 25 30 35 6800 25 30 35 8200 10000 12000 1500 1800 80 2200 30 35 35 35 22 25 22 25 22 25 30 2700 22 25 Endurance : 85° C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE177  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) Cap. (±20%) Case size Dia. Specification (µF) 2700 3300 (mm) 30 22 25 30 Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. PET sleeve Terminal Length (Without P.V.C. plate) Min.PackagingQ'ty 4.0mm (pcs) 200 200 200 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 100 200 200 200 200 200 200 30 50 40 30 45 35 50 40 45 35 50 40 50 30 25 35 30 40 30 25 45 35 30 50 40 30 45 35 50 40 45 35 50 40 45 50 25 30 25 30 25 35 2.78 3.21 3.21 3.21 3.59 3.59 4.09 4.09 4.55 4.55 5.16 5.16 5.83 1.96 1.96 2.31 2.31 2.57 2.57 2.57 2.84 2.84 2.84 3.14 3.14 3.14 3.71 3.71 4.06 4.06 4.54 4.54 5.13 5.13 5.75 6.60 1.45 1.62 1.62 2.11 2.11 2.25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 ECEC1KP272DJ ECEC1KP332BJ ECEC1KP332CJ ECEC1KP332DJ ECEC1KP392CJ ECEC1KP392DJ ECEC1KP472CJ ECEC1KP472DJ ECEC1KP562DJ ECEC1KP562EJ ECEC1KP682DJ ECEC1KP682EJ ECEC1KP822EJ ECEC2AP102BJ ECEC2AP102CJ ECEC2AP122BJ ECEC2AP122CJ ECEC2AP152BJ ECEC2AP152CJ ECEC2AP152DJ ECEC2AP182BJ ECEC2AP182CJ ECEC2AP182DJ ECEC2AP222BJ ECEC2AP222CJ ECEC2AP222DJ ECEC2AP272CJ ECEC2AP272DJ ECEC2AP332CJ ECEC2AP332DJ ECEC2AP392DJ ECEC2AP392EJ ECEC2AP472DJ ECEC2AP472EJ ECEC2AP562EJ ECEC2AP682EJ ECEC2CP331BJ ECEC2CP391BJ ECEC2CP391CJ ECEC2CP471BJ ECEC2CP471CJ ECEC2CP561BJ 3900 80 4700 5600 6800 8200 1000 1200 1500 25 30 25 30 30 35 30 35 35 22 25 22 25 22 25 30 1800 22 25 30 2200 100 2700 3300 3900 4700 5600 6800 330 390 160 470 560 22 25 30 25 30 25 30 30 35 30 35 35 35 22 22 25 22 25 22 Endurance : 85° C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE178  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) Cap. (±20%) Case size Dia. Specification Part No. PET sleeve Terminal Length (Without P.V.C.plate) Min.PackagingQ'ty (µF) 560 680 (mm) 25 30 22 25 30 Ripple Length current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (pcs) 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 30 25 40 35 25 45 35 30 45 35 30 50 35 30 45 35 50 40 45 50 25 30 25 35 25 35 30 40 35 30 45 40 30 45 35 50 40 35 45 40 50 40 2.25 2.25 2.50 2.50 2.50 2.75 2.75 2.75 3.00 3.00 3.00 3.25 3.25 3.25 3.73 3.73 4.20 4.20 4.78 5.45 1.77 1.91 1.91 2.08 2.08 2.25 2.25 2.50 2.50 2.50 2.75 2.75 2.75 3.00 3.00 3.31 3.31 3.31 3.83 3.83 4.32 4.32 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 ECEC2CP561CJ ECEC2CP561DJ ECEC2CP681BJ ECEC2CP681CJ ECEC2CP681DJ ECEC2CP821BJ ECEC2CP821CJ ECEC2CP821DJ ECEC2CP102CJ ECEC2CP102DJ ECEC2CP102EJ ECEC2CP122CJ ECEC2CP122DJ ECEC2CP122EJ ECEC2CP152DJ ECEC2CP152EJ ECEC2CP182DJ ECEC2CP182EJ ECEC2CP222EJ ECEC2CP272EJ ECEC2PP331BJ ECEC2PP391BJ ECEC2PP391CJ ECEC2PP471BJ ECEC2PP471CJ ECEC2PP561BJ ECEC2PP561CJ ECEC2PP681BJ ECEC2PP681CJ ECEC2PP681DJ ECEC2PP821BJ ECEC2PP821CJ ECEC2PP821DJ ECEC2PP102CJ ECEC2PP102DJ ECEC2PP122CJ ECEC2PP122DJ ECEC2PP122EJ ECEC2PP152DJ ECEC2PP152EJ ECEC2PP182DJ ECEC2PP182EJ 820 22 25 30 1000 160 1200 25 30 35 25 30 35 1500 1800 2200 2700 330 390 470 560 680 30 35 30 35 35 35 22 22 25 22 25 22 25 22 25 30 180 820 22 25 30 1000 1200 25 30 25 30 35 1500 1800 30 35 30 35 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE179  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) 1 80 Cap. (±20%) Case size Dia. Specification Part No. PET sleeve Terminal Length (Without P.V.C. plate) Min.Packaging Q'ty (µF) 2200 270 330 390 470 (mm) 35 22 22 25 22 25 22 25 30 Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (pcs) 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 50 25 30 25 30 25 35 30 25 40 35 25 45 35 30 45 35 25 50 40 30 45 35 50 40 45 50 25 30 25 30 25 35 30 25 40 35 25 45 40 30 45 4.92 1.41 1.56 1.56 1.68 1.68 1.85 1.85 1.85 2.43 2.43 2.43 2.68 2.68 2.68 2.93 2.93 2.93 3.25 3.25 3.25 3.50 3.50 3.87 3.87 4.32 4.92 1.07 1.17 1.17 1.31 1.31 1.75 1.75 1.75 1.91 1.91 1.91 2.11 2.11 2.11 2.25 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 ECEC2PP222EJ ECEC2DP271BJ ECEC2DP331BJ ECEC2DP331CJ ECEC2DP391BJ ECEC2DP391CJ ECEC2DP471BJ ECEC2DP471CJ ECEC2DP471DJ ECEC2DP561BJ ECEC2DP561CJ ECEC2DP561DJ ECEC2DP681BJ ECEC2DP681CJ ECEC2DP681DJ ECEC2DP821CJ ECEC2DP821DJ ECEC2DP821EJ ECEC2DP102CJ ECEC2DP102DJ ECEC2DP102EJ ECEC2DP122DJ ECEC2DP122EJ ECEC2DP152DJ ECEC2DP152EJ ECEC2DP182EJ ECEC2DP222EJ ECEC2EP181BJ ECEC2EP221BJ ECEC2EP221CJ ECEC2EP271BJ ECEC2EP271CJ ECEC2EP331BJ ECEC2EP331CJ ECEC2EP331DJ ECEC2EP391BJ ECEC2EP391CJ ECEC2EP391DJ ECEC2EP471BJ ECEC2EP471CJ ECEC2EP471DJ ECEC2EP561CJ 560 22 25 30 200 680 22 25 30 820 25 30 35 1000 25 30 35 1200 1500 1800 2200 180 220 270 330 250 390 30 35 30 35 35 35 22 22 25 22 25 22 25 30 22 25 30 470 22 25 30 560 25 Endurance : 85° C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE180  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) Cap. (±20%) Case size Dia. Specification Part No. PET sleeve Terminal Length (Without P.V.C.plate) Min.Packaging Q'ty (µF) 560 680 (mm) 30 35 25 30 35 Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (pcs) 100 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 35 25 50 40 30 45 35 50 40 45 50 25 30 25 30 25 35 30 25 40 35 25 45 40 30 45 35 25 50 35 30 40 35 45 35 45 50 25 30 30 25 35 2.25 2.25 2.50 2.50 2.50 2.77 2.77 3.32 3.32 3.53 4.04 0.92 1.01 1.01 1.11 1.11 1.21 1.21 1.21 1.41 1.41 1.41 1.60 1.60 1.60 1.82 1.82 1.82 2.01 2.01 2.01 2.27 2.27 2.56 2.56 2.87 3.25 0.83 0.91 1.00 1.00 1.12 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 ECEC2EP561DJ ECEC2EP561EJ ECEC2EP681CJ ECEC2EP681DJ ECEC2EP681EJ ECEC2EP821DJ ECEC2EP821EJ ECEC2EP102DJ ECEC2EP102EJ ECEC2EP122EJ ECEC2EP152EJ ECEC2FP101BJ ECEC2FP121BJ ECEC2FP121CJ ECEC2FP151BJ ECEC2FP151CJ ECEC2FP181BJ ECEC2FP181CJ ECEC2FP181DJ ECEC2FP221BJ ECEC2FP221CJ ECEC2FP221DJ ECEC2FP271BJ ECEC2FP271CJ ECEC2FP271DJ ECEC2FP331CJ ECEC2FP331DJ ECEC2FP331EJ ECEC2FP391CJ ECEC2FP391DJ ECEC2FP391EJ ECEC2FP471DJ ECEC2FP471EJ ECEC2FP561DJ ECEC2FP561EJ ECEC2FP681EJ ECEC2FP821EJ ECEC2VP820BJ ECEC2VP101BJ ECEC2VP121BJ ECEC2VP121CJ ECEC2VP151BJ 250 820 1000 1200 1500 100 120 150 180 30 35 30 35 35 35 22 22 25 22 25 22 25 30 220 22 25 30 270 315 330 22 25 30 25 30 35 390 25 30 35 470 560 680 820 82 100 350 120 150 30 35 30 35 35 35 22 22 22 25 22 Endurance : 85° C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE181  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) Cap. (±20%) Case size Dia. Specification Part No. PET sleeve Terminal Length (Without P.V.C.plate) Min.Packaging Q'ty (µF) 150 180 (mm) 25 30 22 25 30 Length Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (pcs) 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 30 25 40 35 25 45 40 30 25 45 35 30 50 40 30 45 35 50 40 45 50 25 25 30 25 35 30 40 30 25 45 35 30 50 40 30 45 35 30 40 35 45 1.12 1.12 1.22 1.22 1.22 1.44 1.44 1.44 1.44 1.66 1.66 1.66 1.88 1.88 1.88 2.06 2.06 2.40 2.40 2.60 2.96 0.76 0.83 0.92 0.92 1.02 1.02 1.16 1.16 1.16 1.44 1.44 1.44 1.49 1.49 1.49 1.67 1.67 1.67 1.90 1.90 2.13 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 ECEC2VP151CJ ECEC2VP151DJ ECEC2VP181BJ ECEC2VP181CJ ECEC2VP181DJ ECEC2VP221BJ ECEC2VP221CJ ECEC2VP221DJ ECEC2VP221EJ ECEC2VP271CJ ECEC2VP271DJ ECEC2VP271EJ ECEC2VP331CJ ECEC2VP331DJ ECEC2VP331EJ ECEC2VP391DJ ECEC2VP391EJ ECEC2VP471DJ ECEC2VP471EJ ECEC2VP561EJ ECEC2VP681EJ ECEC2GP680BJ ECEC2GP820BJ ECEC2GP101BJ ECEC2GP101CJ ECEC2GP121BJ ECEC2GP121CJ ECEC2GP151BJ ECEC2GP151CJ ECEC2GP151DJ ECEC2GP181BJ ECEC2GP181CJ ECEC2GP181DJ ECEC2GP221BJ ECEC2GP221CJ ECEC2GP221DJ ECEC2GP271CJ ECEC2GP271DJ ECEC2GP271EJ ECEC2GP331DJ ECEC2GP331EJ ECEC2GP391DJ 220 22 25 30 35 270 350 330 25 30 35 25 30 35 390 470 560 680 68 82 100 120 150 30 35 30 35 35 35 22 22 22 25 22 25 22 25 30 180 400 220 22 25 30 22 25 30 270 25 30 35 330 390 30 35 30 Endurance : 85° C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE182  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) Cap. (±20%) Case size Dia. Length Specification Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) Part No. PET sleeve Terminal Length (Without P.V.C. plate) Min.Packaging Q'ty (µF) 390 (mm) 35 35 35 22 22 25 22 25 22 25 30 (mm) 40 45 50 30 30 25 35 30 40 30 25 45 35 30 45 30 25 50 35 30 45 35 50 40 45 50 25 30 30 25 35 30 25 40 30 25 50 40 30 45 35 25 (A) 4.0mm (pcs) 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 2.13 2.39 2.69 0.83 0.92 0.92 1.02 1.02 1.16 1.16 1.16 1.44 1.44 1.44 1.49 1.49 1.49 1.67 1.67 1.67 1.90 1.90 2.13 2.13 2.39 2.69 0.70 0.76 0.83 0.83 0.93 0.93 0.93 1.04 1.04 1.04 1.19 1.19 1.19 1.35 1.35 1.35 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 ECEC2GP391EJ ECEC2GP471EJ ECEC2GP561EJ ECEC2SP820BJ ECEC2SP101BJ ECEC2SP101CJ ECEC2SP121BJ ECEC2SP121CJ ECEC2SP151BJ ECEC2SP151CJ ECEC2SP151DJ ECEC2SP181BJ ECEC2SP181CJ ECEC2SP181DJ ECEC2SP221CJ ECEC2SP221DJ ECEC2SP221EJ ECEC2SP271CJ ECEC2SP271DJ ECEC2SP271EJ ECEC2SP331DJ ECEC2SP331EJ ECEC2SP391DJ ECEC2SP391EJ ECEC2SP471EJ ECEC2SP561EJ ECEC2WP560BJ ECEC2WP680BJ ECEC2WP820BJ ECEC2WP820CJ ECEC2WP101BJ ECEC2WP101CJ ECEC2WP101DJ ECEC2WP121BJ ECEC2WP121CJ ECEC2WP121DJ ECEC2WP151BJ ECEC2WP151CJ ECEC2WP151DJ ECEC2WP181CJ ECEC2WP181DJ ECEC2WP181EJ 400 470 560 82 100 120 150 180 420 220 22 25 30 25 30 35 270 25 30 35 330 390 470 560 56 68 82 100 30 35 30 35 35 35 22 22 22 25 22 25 30 450 120 22 25 30 150 22 25 30 180 25 30 35 Endurance : 85° C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE183  Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. (V) Cap. (±20%) Case size Dia. Specification Part No. PET sleeve Terminal Length (Without P.V.C. plate) Min.Packaging Q'ty (µF) 220 (mm) 25 30 35 Length Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (pcs) 200 100 200 100 100 100 100 100 100 50 40 30 45 35 50 40 45 50 1.55 1.55 1.55 1.78 1.78 2.01 2.01 2.24 2.53 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 ECEC2WP221CJ ECEC2WP221DJ ECEC2WP221EJ ECEC2WP271DJ ECEC2WP271EJ ECEC2WP331DJ ECEC2WP331EJ ECEC2WP391EJ ECEC2WP471EJ 270 450 330 390 470 30 35 30 35 35 35 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE184  Aluminum Electrolytic Capacitors/ UP(L:20mm) n Standard Products(L:20mm) W.V. (V) Cap. (±20%) Case size Dia. (mm) 22 25 30 35 22 25 30 35 22 25 30 35 22 25 30 35 22 25 30 35 22 25 30 35 22 25 30 35 22 25 30 35 22 25 30 35 22 25 30 35 22 25 Specification Part No. PET sleeve Terminal Length (Without P.V.C.plate) Min.Packaging Q'ty (µF) 4700 6800 10000 15000 3300 4700 6800 10000 2200 3300 4700 6800 1500 2200 3300 4700 1000 1500 2200 2700 680 1000 1500 2200 470 680 1000 1500 220 270 390 560 150 220 330 470 120 150 220 330 47 68 Ripple Length current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 4.0mm (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1.60 1.80 2.40 3.20 1.60 1.80 2.30 2.70 1.40 1.70 2.00 2.40 1.20 1.40 1.70 2.10 1.20 1.30 1.50 1.70 1.00 1.20 1.40 1.70 1.00 1.10 1.20 1.50 0.75 0.87 1.10 1.30 0.65 0.87 1.10 1.30 0.45 0.65 0.87 1.10 0.25 0.35 0.50 0.50 0.50 0.50 0.40 0.40 0.40 0.40 0.35 0.35 0.35 0.35 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 ECEC1CP472BJ ECEC1CP682CJ ECEC1CP103DJ ECEC1CP153EJ ECEC1EP332BJ ECEC1EP472CJ ECEC1EP682DJ ECEC1EP103EJ ECEC1VP222BJ ECEC1VP332CJ ECEC1VP472DJ ECEC1VP682EJ ECEC1HP152BJ ECEC1HP222CJ ECEC1HP332DJ ECEC1HP472EJ ECEC1JP102BJ ECEC1JP152CJ ECEC1JP222DJ ECEC1JP272EJ ECEC1KP681BJ ECEC1KP102CJ ECEC1KP152DJ ECEC1KP222EJ ECEC2AP471BJ ECEC2AP681CJ ECEC2AP102DJ ECEC2AP152EJ ECEC2CP221BJ ECEC2CP271CJ ECEC2CP391DJ ECEC2CP561EJ ECEC2DP151BJ ECEC2DP221CJ ECEC2DP331DJ ECEC2DP471EJ ECEC2EP121BJ ECEC2EP151CJ ECEC2EP221DJ ECEC2EP331EJ ECEC2GP470BJ ECEC2GP680CJ 16 25 35 50 63 80 100 160 200 250 400 Endurance : 85° C 2000h Terminal Pitch : 10mm Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE185  Aluminum Electrolytic Capacitors/ UP(L:20mm) n Standard Products(L:20mm) W.V. (V) 400 Cap. (±20%) Case size Dia. (mm) 30 35 22 25 30 35 Specification Part No. PET sleeve Terminal Length (Without P.V.C.plate) Min.PackagingQ'ty (µF) 100 150 33 47 68 100 Ripple Length current tan δ (120Hz) (120Hz) (+20°C) ( m m ) (+85°C) (A) 4.0mm (pcs) 200 200 200 200 200 200 20 20 20 20 20 20 0.47 0.60 0.20 0.29 0.38 0.52 0.15 0.15 0.15 0.15 0.15 0.15 ECEC2GP101DJ ECEC2GP151EJ ECEC2WP330BJ ECEC2WP470CJ ECEC2WP680DJ ECEC2WP101EJ 450 Endurance : 85° C 2000h Terminal Pitch : 10mm Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE186 