ECHU1103GC9

Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(C) Stacked metallized PPS film as dielectric with simple mold-less construction I Features • Small in size • Low loss and excellent frequency characteristics • For reflow soldering • RoHS directive compliant I Recommended Applications • Time-constant • Filtering • Oscillation and resonance • Resonance circuit for LCD backlight inverter unit I Explanation of Numbers 1 2 3 4 5 6 7 8 9 10 11 E C H U 1 Rated voltage Capacitance C Cap. Tol. Suffix Suffix Product code Dielectric & construction 1 100 VDC G ±2 % J ±5 % 9 V Tape width 12 mm 16 mm I Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions −55 ℃ to ＋105 ℃ 100 VDC 0.010 µF to 0.22 µF(E12) ±2 %(G),±5 %(J) Between terminals : Rated volt. (VDC)✕150 % 60 s tanδ≦0.6 % (20 ℃, 1 kHz) IR≧3000 ＭΩ(20 ℃, 100 VDC, 60 s) Reflow soldering : 260 ˚C max. and 95 s max. at more than 220 ˚C (Temp. at cap. Surface) ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors I Construction I Dimensions in mm (not to scale) size L W H code E1 4.8 3.3 1.4 E2 4.8 3.3 2.0 E3a 4.8 3.3 2.4 E3 4.8 3.3 2.8 D1 6.0 4.1 1.8 D2 6.0 4.1 2.0 D3 6.0 4.1 2.4 D4 6.0 4.1 2.8 D5 6.0 4.1 3.2 Z 7.1 5.0 ❈ Y 7.1 6.3 ❈ ❈Refer to the column “ Rating,Dimensions&Quantity” I Taping Specification for Automatic Mounting Refer to the page of taping specifications. I Rating, Dimensions & Quantity/Reel G Capacitance tolerance: ±2 % (G), ±5 % (J) Rated volt. 100 VDC Cap.(µF) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Part No. ECHU1103□C9 ECHU1123□C9 ECHU1153□C9 ECHU1183□C9 ECHU1223□C9 ECHU1273□C9 ECHU1333□C9 ECHU1393□C9 ECHU1473□C9 ECHU1563□C9 ECHU1683□C9 ECHU1823□C9 ECHU1104□C9 ECHU1124□C9 ECHU1154□CV ECHU1184□CV ECHU1224□CV ↑ Dimensions (mm) Size Code L 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 7.1 7.1 7.1 7.1 7.1 7.1 W 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 5.0 6.3 6.3 6.3 H 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 2.8 3.0 3.4 3.4 4.0 4.8 Q'ty E1 E1 E2 E2 E3a E3 D1 D2 D3 D4 D5 Z Z Z Y Y Y 3000 2000 3000 2000 1500 1000 Cap. tol. code I Recommended for Land Dimensions (mm) Land dimensions Size code Reflow soldering A B C E1,E2,E3a,E3 D1,D2,D3,D4,D5 Z Y 2.6 3.8 4.5 4.5 6.6 7.8 9.0 9.0 3.0 3.8 4.6 5.7 ❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.